Notices
1/16th, 1/18th, Mini & Micro RC Cars Discuss 1/16, 1/18, Minis, Micros & any RC Cars smaller than 1/10th scale in this forum

couple of mini revo questions

Old 12-08-2011, 06:49 PM
  #1  
Traxxas4fun
Senior Member
Thread Starter
My Feedback: (3)
 
Join Date: Jul 2008
Location: fishers, IN
Posts: 656
Likes: 0
Received 0 Likes on 0 Posts
Default couple of mini revo questions

Hey i just got myself a mini revo. Got it used. Has 2 2s lipos, 3 nimh packs and one 3s lipo. Already has rpm a arms all around and rpm bumpers.

ANYWAY.

Is it possible to run 2 2s in series? i know 2 6 cell nimh packs is 14.4v and two 2s lipos would be 14.8 so would it be ok or would the esc pop?

Any one have any pics of proline 2.2 buggy dirthawgs III FRONT tires mounted on some 2.2 rims on the mini revo?
What about the 2.2 buggy dirthawgs III REAR mounted on some 2.2 rims on the mini revo?

I know the 1/16 titus beadlock/dirthaw combo those dirthawgs are about 1.4in wide and the 2.2 buggy fronts are about 1.25inches wide.
Old 12-08-2011, 07:10 PM
  #2  
Traxxas4fun
Senior Member
Thread Starter
My Feedback: (3)
 
Join Date: Jul 2008
Location: fishers, IN
Posts: 656
Likes: 0
Received 0 Likes on 0 Posts
Default RE: couple of mini revo questions

another question. will sand paws 2.2 fit on the white traxxas 1/16 2.2 dish wheels?
Old 12-10-2011, 03:23 PM
  #3  
imp3r10
Member
 
Join Date: Jul 2011
Location: Rapid City, SD
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Default RE: couple of mini revo questions

the ESC can handle the voltage of the 2S in series but it is only made to handle 3s because of the low voltage cut off is set for only 3 cells.  just gotta be careful not to ruin your batteries
Old 12-10-2011, 03:45 PM
  #4  
SyCo_VeNoM
 
SyCo_VeNoM's Avatar
 
Join Date: Jul 2007
Location: North West Indiana
Posts: 12,798
Likes: 0
Received 3 Likes on 3 Posts
Default RE: couple of mini revo questions

ORIGINAL: imp3r10

the ESC can handle the voltage of the 2S in series but it is only made to handle 3s because of the low voltage cut off is set for only 3 cells. just gotta be careful not to ruin your batteries
The LVC is not the reason why it can't handle 4S...

Fully charged the 2 lipos will be 16.8V's (4.2Volts a cell) which will more than likely toast the ESC, and motor...
the NiMh's are 14.4V's (1.2V's a cell) but drop VERY quickly under load where the lipos will stay at 16.8 Volts for a prolonged period of time.

Other reason's BEC will probably fry they are made for certain voltages, and the motor is rated for 50,000 RPM's* 4S would fling it to over 67,000 RPM's. on 2 NiMh's its at 57,000RPM which is well over the recommended RPM's. Remember the 2 NiMh's are meant only for speed runs on flat paved surfaces, and only intermittent. Dual series batteries are a great way to destroy the motor


*based on specs from towerhobbies.com
Old 12-10-2011, 08:42 PM
  #5  
t9dragon
Senior Member
My Feedback: (11)
 
Join Date: Apr 2004
Location: PDX, OR
Posts: 7,866
Likes: 0
Received 1 Like on 1 Post
Default RE: couple of mini revo questions


ORIGINAL: Traxxas4fun

another question. will sand paws 2.2 fit on the white traxxas 1/16 2.2 dish wheels?
The 1/16 wheels are not 2.2
Old 12-12-2011, 09:14 AM
  #6  
gforce2448
Senior Member
My Feedback: (12)
 
gforce2448's Avatar
 
Join Date: Aug 2010
Location: Wilsonville, OR
Posts: 360
Likes: 0
Received 0 Likes on 0 Posts
Default RE: couple of mini revo questions

The Sand Paws will fit on the Traxxas 2.2 dished wheels if you get those. I have a few sets of those and any 1/10 rear buggy tire will fit on those 2.2 wheels.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.