View Poll Results: A poll
Voters: 33. You may not vote on this poll
Battery connectors
#1
Thread Starter
My Feedback: (27)
Battery connectors
I just recieved a Mamba Monster 2200 Combo used for my e-converted Losi 8ight 2.0 buggy. This is going to be an extreem high speed car and I need to be able to flow as much current as possible. The ESC already has Traxxas connectors installed but are Deans connectors better? Will Deans allow for a higher flow of current than the Traxxas? I still need to purchase batteries for the buggy so I will need to install connector on them anyways. If the traxxas connectors are fine I will just use them and leave the ESC connectors alone but if there is any advantage to using Deans instead I will go ahead and change them.
Thanks
Thanks
#2
Senior Member
Join Date: Aug 2010
Location: Akron, OH
Posts: 2,604
Likes: 0
Received 0 Likes
on
0 Posts
RE: Battery connectors
If you are not *****g out your connectors capacity then it will work just fine. "better" connectors simply have a higher rating, but the actual contact area and materials are very similar. For a large 8th scale set up I would suggest bullet connectors, just don't mix up your positive and negative!
#8
RE: Battery connectors
ORIGINAL: yakfish
So one really isn't better thn the other? I am not concerned about melting or warping but their ability to carry the current the the motor needs.
Thanks
So one really isn't better thn the other? I am not concerned about melting or warping but their ability to carry the current the the motor needs.
Thanks
#9
Member
Join Date: Dec 2007
Location: , QC, CANADA
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
RE: Battery connectors
IMHO the EC5 is the best there is. I have converted all my toys to this. Can take massive amps and are a breeze to put together/take apart. Impossible to short out unless you stick a screw driver in them on purpose. http://www.hobbyking.com/hobbyking/s...idProduct=9194
#10
Senior Member
My Feedback: (1)
Join Date: Jun 2009
Location: Great Falls,
MT
Posts: 2,482
Likes: 0
Received 0 Likes
on
0 Posts
RE: Battery connectors
copy/paste of what I said in the last thread asking this question:
I use traxxas, you have to put them together correctly to get them to work well. I've used many other people's traxxas connectors and they were super stiff, they didn't install them correctly. I've also heard stories of the tabs popping out when connecting a battery, again, improper installation. I've even seen some come straight from traxxas not put on correctly, no surprise there really. Of course I've also seen many pictures here on the forums of connectors that were obviously not put together correctly. They work really well, with a secure hold, but easily removable, IF you work to get them assembled correctly. Deans are probably easier to put on, I like EC3/5s too. I've even become partial to hobbyking's XT60s. I just started out with traxxas, so that's probably what I'll stick with from now on.
edit: Here is the thread in case you want to look through it for more opinions:
http://www.rcuniverse.com/forum/m_10..._1/key_/tm.htm
I use traxxas, you have to put them together correctly to get them to work well. I've used many other people's traxxas connectors and they were super stiff, they didn't install them correctly. I've also heard stories of the tabs popping out when connecting a battery, again, improper installation. I've even seen some come straight from traxxas not put on correctly, no surprise there really. Of course I've also seen many pictures here on the forums of connectors that were obviously not put together correctly. They work really well, with a secure hold, but easily removable, IF you work to get them assembled correctly. Deans are probably easier to put on, I like EC3/5s too. I've even become partial to hobbyking's XT60s. I just started out with traxxas, so that's probably what I'll stick with from now on.
edit: Here is the thread in case you want to look through it for more opinions:
http://www.rcuniverse.com/forum/m_10..._1/key_/tm.htm
#11
RE: Battery connectors
ORIGINAL: Brainanator
copy/paste of what I said in the last thread asking this question:
I use traxxas, you have to put them together correctly to get them to work well. I've used many other people's traxxas connectors and they were super stiff, they didn't install them correctly. I've also heard stories of the tabs popping out when connecting a battery, again, improper installation. I've even seen some come straight from traxxas not put on correctly, no surprise there really. Of course I've also seen many pictures here on the forums of connectors that were obviously not put together correctly. They work really well, with a secure hold, but easily removable, IF you work to get them assembled correctly. Deans are probably easier to put on, I like EC3/5s too. I've even become partial to hobbyking's XT60s. I just started out with traxxas, so that's probably what I'll stick with from now on.
edit: Here is the thread in case you want to look through it for more opinions:
http://www.rcuniverse.com/forum/m_10..._1/key_/tm.htm
copy/paste of what I said in the last thread asking this question:
I use traxxas, you have to put them together correctly to get them to work well. I've used many other people's traxxas connectors and they were super stiff, they didn't install them correctly. I've also heard stories of the tabs popping out when connecting a battery, again, improper installation. I've even seen some come straight from traxxas not put on correctly, no surprise there really. Of course I've also seen many pictures here on the forums of connectors that were obviously not put together correctly. They work really well, with a secure hold, but easily removable, IF you work to get them assembled correctly. Deans are probably easier to put on, I like EC3/5s too. I've even become partial to hobbyking's XT60s. I just started out with traxxas, so that's probably what I'll stick with from now on.
edit: Here is the thread in case you want to look through it for more opinions:
http://www.rcuniverse.com/forum/m_10..._1/key_/tm.htm
I do like the EC5's a lil more, but I'd have to buy so many to convert everything over its not really funny(28 or so males, and 13 females).
#12
Senior Member
My Feedback: (2)
RE: Battery connectors
ORIGINAL: yakfish
So one really isn't better thn the other? I am not concerned about melting or warping but their ability to carry the current the the motor needs.
Thanks
So one really isn't better thn the other? I am not concerned about melting or warping but their ability to carry the current the the motor needs.
Thanks
#14
Senior Member
My Feedback: (1)
Join Date: Feb 2011
Location: Garden City,
MI
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
RE: Battery connectors
I currently use deans and personally I think they are one of the harder plugs to solder. I had used Traxxas connectors in the past and found them pretty easy to solder up. Next time I go through and redo my stuff I'll either being going straight bullets or checking out the EC5's.
#15
Senior Member
My Feedback: (3)
Join Date: Jul 2004
Location: Norwood,
OH
Posts: 22,101
Likes: 0
Received 0 Likes
on
0 Posts
RE: Battery connectors
ThunderbirdJunkie has been using Deans for 15ish+ years. He's gotten pretty used to soldering them and finds them easy. Maybe he does it different from everybody else?
Traxxas plugs aren't hard once you realize that you have to keep solder behind the line and push the tab in with a screwdriver, and EC3s/5s are cake.
Traxxas plugs aren't hard once you realize that you have to keep solder behind the line and push the tab in with a screwdriver, and EC3s/5s are cake.
#16
Senior Member
Join Date: May 2011
Location: cicero,
IL
Posts: 716
Likes: 0
Received 0 Likes
on
0 Posts
RE: Battery connectors
use ec5. more solid connection den any deans plug on earf. not only is it a press fit bullet, but da plug case creats a sort of vaccuum lock. xerxes hates deans conecters. especialy on off road vehikles
#18
Senior Member
Join Date: May 2011
Location: cicero,
IL
Posts: 716
Likes: 0
Received 0 Likes
on
0 Posts
RE: Battery connectors
ORIGINAL: ThunderbirdJunkie
What problems do you have out of Deans, xerxes?
What problems do you have out of Deans, xerxes?
deans also tends 2 unplug itself wen offroading. new or used. genuine or nok off. lawn darts disconect deans 24/7
& dats reel talk yo.
#19
Senior Member
My Feedback: (3)
Join Date: Jul 2004
Location: Norwood,
OH
Posts: 22,101
Likes: 0
Received 0 Likes
on
0 Posts
RE: Battery connectors
ThunderbirdJunkie has only had Deans plugs' terminals wiggle in the nylon if he used too little heat to solder them. Too little heat means you're holding it to the plug too long and that melts the nylon.
Never had a Deans plug come undone mid-run, though, ever.
Never had a Deans plug come undone mid-run, though, ever.
#20
Senior Member
My Feedback: (1)
Join Date: Apr 2008
Location: Hinsburg ,
VT
Posts: 5,877
Likes: 0
Received 0 Likes
on
0 Posts
RE: Battery connectors
ORIGINAL: ThunderbirdJunkie
ThunderbirdJunkie has only had Deans plugs' terminals wiggle in the nylon if he used too little heat to solder them. Too little heat means you're holding it to the plug too long and that melts the nylon.
Never had a Deans plug come undone mid-run, though, ever.
ThunderbirdJunkie has only had Deans plugs' terminals wiggle in the nylon if he used too little heat to solder them. Too little heat means you're holding it to the plug too long and that melts the nylon.
Never had a Deans plug come undone mid-run, though, ever.
the lug