DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
#476
Member
Join Date: Mar 2011
Location: Sequim,
WA
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
my order # is:yhst-17210252890263-202574 I would have posted this earlier but I just noticed your response. thanks!
#477
Senior Member
Join Date: Sep 2010
Location: la puente, CA, UNITED KINGDOM
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
ORIGINAL: stick man
my order # is:yhst-17210252890263-202574 I would have posted this earlier but I just noticed your response. thanks!
my order # is:yhst-17210252890263-202574 I would have posted this earlier but I just noticed your response. thanks!
I will try to find a windshield and ship it out for you.
Eric
#478
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
Hello Eric,
I recently purchased a Honda 420 jet that had several damaged parts. The left motor cowl is cracked. The canopy is cracked and last and most important is the fuselage has a dent in several place that looks like it may have gotten heated up and warped some how. Here is my order number so please consider sending me replacement parts.
My nitroplanes order ID is 1400226
My order number is yhst-17210252890263-217928
Lastly I have to say that I have purchased several planes from nitroplanes.com and tons of electronics from hobbypartz.com and I would not be able to enjoy this hobby without the prices you guys provide.
Thank you for your time and I look forward to those parts as I can't wait to get it in the air. Oh if you needs pictures I will be more than happy to provide them.
Mark
I recently purchased a Honda 420 jet that had several damaged parts. The left motor cowl is cracked. The canopy is cracked and last and most important is the fuselage has a dent in several place that looks like it may have gotten heated up and warped some how. Here is my order number so please consider sending me replacement parts.
My nitroplanes order ID is 1400226
My order number is yhst-17210252890263-217928
Lastly I have to say that I have purchased several planes from nitroplanes.com and tons of electronics from hobbypartz.com and I would not be able to enjoy this hobby without the prices you guys provide.
Thank you for your time and I look forward to those parts as I can't wait to get it in the air. Oh if you needs pictures I will be more than happy to provide them.
Mark
#480
Junior Member
Join Date: Jul 2011
Location: colorado springs,
CO
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
I purchased a AirField RC T28 1400mm on 08/22/2011.
Order no. yhst-1721025289063-212774.
I just now got around to putting it togeher and have discovered it is missing the Landing Gear Sequencer. (93a328-14)
Can you help.
fidoav8r
Order no. yhst-1721025289063-212774.
I just now got around to putting it togeher and have discovered it is missing the Landing Gear Sequencer. (93a328-14)
Can you help.
fidoav8r
#481
Senior Member
Join Date: Sep 2010
Location: la puente, CA, UNITED KINGDOM
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
ORIGINAL: fidoav8r
I purchased a AirField RC T28 1400mm on 08/22/2011.
Order no. yhst-1721025289063-212774.
I just now got around to putting it togeher and have discovered it is missing the Landing Gear Sequencer. (93a328-14)
Can you help.
fidoav8r
I purchased a AirField RC T28 1400mm on 08/22/2011.
Order no. yhst-1721025289063-212774.
I just now got around to putting it togeher and have discovered it is missing the Landing Gear Sequencer. (93a328-14)
Can you help.
fidoav8r
Eric
#483
Member
Join Date: Jan 2010
Location: Central City,
KY
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
just received my giles 202 3d 40. didnt get any wheel paints. would like to have all the parts i paid for.my order number is 1502435.
#484
Member
Join Date: Jan 2010
Location: Central City,
KY
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
just received my giles 202 3d 40. didnt get any wheel paints. would like to have all the parts i paid for.my order number is 1502435.
#486
My Feedback: (10)
Join Date: Nov 2004
Location: Bloomington,
IL
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
Hello, I ordered a CMP PA-28 EP and received it with a broken canopy. I contacted your support, who sent me a replacement that I received today. It is broken worse than the first. You know, it would really help if you packed this properly instead of just throwing it in a box that wasn't even long enough for the canopy to sit flat in! No packing, wedged into a tight box, it is going to break! Now can you please send me one so I can finally build my plane?
Attached are some pictures of the canopy and the box it came in. Thank you.
United States Order Number: 1534349
order yhst-17210252890263-243225
Name Code Qty Each Options
-
CMP EP-P28 Radio CMP-EP-PA28-Kit 1 84.50
Controlled 50~55 Electric
Scale RC Airplane Kit
(Shipped)
UPS Tracking Number:
1ZX03V030390061100
Subtotal 84.50
Shipping 21.72
Tax 0.00
Total 106.22
Attached are some pictures of the canopy and the box it came in. Thank you.
United States Order Number: 1534349
order yhst-17210252890263-243225
Name Code Qty Each Options
-
CMP EP-P28 Radio CMP-EP-PA28-Kit 1 84.50
Controlled 50~55 Electric
Scale RC Airplane Kit
(Shipped)
UPS Tracking Number:
1ZX03V030390061100
Subtotal 84.50
Shipping 21.72
Tax 0.00
Total 106.22
#487
Senior Member
Join Date: Sep 2010
Location: la puente, CA, UNITED KINGDOM
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
ORIGINAL: Firepower R/C
Hello, I ordered a CMP PA-28 EP and received it with a broken canopy. I contacted your support, who sent me a replacement that I received today. It is broken worse than the first. You know, it would really help if you packed this properly instead of just throwing it in a box that wasn't even long enough for the canopy to sit flat in! No packing, wedged into a tight box, it is going to break! Now can you please send me one so I can finally build my plane?
Attached are some pictures of the canopy and the box it came in. Thank you.
United States Order Number: 1534349
order yhst-17210252890263-243225
Name Code Qty Each Options
-
CMP EP-P28 Radio CMP-EP-PA28-Kit 1 84.50
Controlled 50~55 Electric
Scale RC Airplane Kit
(Shipped)
UPS Tracking Number:
1ZX03V030390061100
Subtotal 84.50
Shipping 21.72
Tax 0.00
Total 106.22
Hello, I ordered a CMP PA-28 EP and received it with a broken canopy. I contacted your support, who sent me a replacement that I received today. It is broken worse than the first. You know, it would really help if you packed this properly instead of just throwing it in a box that wasn't even long enough for the canopy to sit flat in! No packing, wedged into a tight box, it is going to break! Now can you please send me one so I can finally build my plane?
Attached are some pictures of the canopy and the box it came in. Thank you.
United States Order Number: 1534349
order yhst-17210252890263-243225
Name Code Qty Each Options
-
CMP EP-P28 Radio CMP-EP-PA28-Kit 1 84.50
Controlled 50~55 Electric
Scale RC Airplane Kit
(Shipped)
UPS Tracking Number:
1ZX03V030390061100
Subtotal 84.50
Shipping 21.72
Tax 0.00
Total 106.22
Eric
#488
My Feedback: (10)
Join Date: Nov 2004
Location: Bloomington,
IL
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
Nitroplanes has sent me another replacement canopy that arrived well protected and intact. I do appreciate the good customer service, and will buy more from them in the future. Thank you very much.
#489
Senior Member
Join Date: Sep 2010
Location: la puente, CA, UNITED KINGDOM
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
ORIGINAL: Firepower R/C
Nitroplanes has sent me another replacement canopy that arrived well protected and intact. I do appreciate the good customer service, and will buy more from them in the future. Thank you very much.
Nitroplanes has sent me another replacement canopy that arrived well protected and intact. I do appreciate the good customer service, and will buy more from them in the future. Thank you very much.
Eric
#490
Junior Member
Join Date: Nov 2010
Location: Newton,
IA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
Hello,
I recently sent the attached email to support (1/16/2013) and so far have received no reply.
This was also the result for the last plane i purchase from nitromodels.
Can someone respond and comment on what my options may be to resolve the problem.[img]C:%5CDocuments%20and%20Settings%5Cxxx%5CMy%20Docum ents%5CMy%20Pictures%5CExtra%20500%20009.jpg;%20C: %5CDocuments%20and%20Settings%5Cxxx%5CMy%20Documen ts%5CMy%20Pictures%5CExtra%20500%20017.jpg;%20C:%5 CDocuments%20and%20Settings%5Cxxx%5CMy%20Documents %5CMy%20Pictures%5CExtra%20500%20011.jpg;[/img]
kafton
New Version 2 Extra 500 90A208Y-Gas-Extra500-Yellow
I recently purchased this model from Nitro Models and tried to inventory the enclosed
parts and pieces, per the parts list (A VERY SMALL PHOTO OF TINY PARTS).
I manage to identify most of them and started to assemble the fuselage, where I found
some of the hardware was not there, but I could find most of it locally. The only exception being the
plate that supports the 2 rear wing attachment screws that attaches the wing to the fuselage.
I have attached a photo, from the manual, of this part and would ask that you please send one to me.
My second concern has to do with the wings. When I unpacked them and had them next to the fuselage,
they were nowhere near the same color. They were noticeably darker in color and when assembled their
fit to the fuselage was possible, but not great. Upon closer inspection, I also found that the servo cutout
under the wing cover measured 20 mm x 60 mm. This is far too large to accommodate any typical, available servo and would compromise security of servo a/o leave an unsecured area of covering. To my knowledge this model is not offered in the color of these wings. It would, almost, seem that they are not for the Extra 500. Again, I have attached photos show that show color differential and the servo cutout. I would imagine a skilled builder, with considerable effort, might remedy the cutout problem and I could scab some kind patch and end up with usable off-colored (esthetics be damned) Extra 550.
I looked forward to hearing you on the attachment plate and any comments you have on the wing.
I recently sent the attached email to support (1/16/2013) and so far have received no reply.
This was also the result for the last plane i purchase from nitromodels.
Can someone respond and comment on what my options may be to resolve the problem.[img]C:%5CDocuments%20and%20Settings%5Cxxx%5CMy%20Docum ents%5CMy%20Pictures%5CExtra%20500%20009.jpg;%20C: %5CDocuments%20and%20Settings%5Cxxx%5CMy%20Documen ts%5CMy%20Pictures%5CExtra%20500%20017.jpg;%20C:%5 CDocuments%20and%20Settings%5Cxxx%5CMy%20Documents %5CMy%20Pictures%5CExtra%20500%20011.jpg;[/img]
kafton
New Version 2 Extra 500 90A208Y-Gas-Extra500-Yellow
I recently purchased this model from Nitro Models and tried to inventory the enclosed
parts and pieces, per the parts list (A VERY SMALL PHOTO OF TINY PARTS).
I manage to identify most of them and started to assemble the fuselage, where I found
some of the hardware was not there, but I could find most of it locally. The only exception being the
plate that supports the 2 rear wing attachment screws that attaches the wing to the fuselage.
I have attached a photo, from the manual, of this part and would ask that you please send one to me.
My second concern has to do with the wings. When I unpacked them and had them next to the fuselage,
they were nowhere near the same color. They were noticeably darker in color and when assembled their
fit to the fuselage was possible, but not great. Upon closer inspection, I also found that the servo cutout
under the wing cover measured 20 mm x 60 mm. This is far too large to accommodate any typical, available servo and would compromise security of servo a/o leave an unsecured area of covering. To my knowledge this model is not offered in the color of these wings. It would, almost, seem that they are not for the Extra 500. Again, I have attached photos show that show color differential and the servo cutout. I would imagine a skilled builder, with considerable effort, might remedy the cutout problem and I could scab some kind patch and end up with usable off-colored (esthetics be damned) Extra 550.
I looked forward to hearing you on the attachment plate and any comments you have on the wing.
#491
Join Date: Aug 2002
Location: Landenberg PA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
On January 4 I received a Zlin Z-50 .46-.52 size. The manual included with the plane was for the 1.2 size. I've "Live Chatted" 3 times about this. The first time the person sent me a new manual. It was a phot copy of the manual I already have. Does anyone have a manual for the .46-.52 size Zlin that they can PDF and send to me via email. If not, I can put the plane together, but I need the CG point for the plane. Thanks.
#492
Junior Member
Join Date: Nov 2010
Location: Newton,
IA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
From the reply, I assume that I'm expected to purchase the part not shipped with the Extra 500 kit?
That won't work, in the first place, it was suppose to be included and secondly, where do I find it?
I've tried to send three photos that I hope will help you understand.
Photo 1 Shows the picture of the (needed) missing part take from the Manual.
Photo's 2 & 3 They show an off-colored wing that doesn't match the true color (fuselage), doesn't
have the dark leading edge (deicer), doesn't have the 4 predrilled mounting holes,
And probably doesn't go with this airplane.
The wing does have a laser-cutout for the aileron that is 60mm x 20mm far TOLARGE
to properly mount a standard 40mm x 20mm servo.
Hopefully,
kafton
That won't work, in the first place, it was suppose to be included and secondly, where do I find it?
I've tried to send three photos that I hope will help you understand.
Photo 1 Shows the picture of the (needed) missing part take from the Manual.
Photo's 2 & 3 They show an off-colored wing that doesn't match the true color (fuselage), doesn't
have the dark leading edge (deicer), doesn't have the 4 predrilled mounting holes,
And probably doesn't go with this airplane.
The wing does have a laser-cutout for the aileron that is 60mm x 20mm far TOLARGE
to properly mount a standard 40mm x 20mm servo.
Hopefully,
kafton
#493
Senior Member
Join Date: Sep 2010
Location: la puente, CA, UNITED KINGDOM
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
ORIGINAL: KAFTON
Hello,
I recently sent the attached email to support (1/16/2013) and so far have received no reply.
This was also the result for the last plane i purchase from nitromodels.
Can someone respond and comment on what my options may be to resolve the problem.[img]C:%5CDocuments%20and%20Settings%5Cxxx%5CMy%20Docum ents%5CMy%20Pictures%5CExtra%20500%20009.jpg;%20C: %5CDocuments%20and%20Settings%5Cxxx%5CMy%20Documen ts%5CMy%20Pictures%5CExtra%20500%20017.jpg;%20C:%5 CDocuments%20and%20Settings%5Cxxx%5CMy%20Documents %5CMy%20Pictures%5CExtra%20500%20011.jpg;[/img]
kafton
New Version 2 Extra 500 90A208Y-Gas-Extra500-Yellow
I recently purchased this model from Nitro Models and tried to inventory the enclosed
parts and pieces, per the parts list (A VERY SMALL PHOTO OF TINY PARTS).
I manage to identify most of them and started to assemble the fuselage, where I found
some of the hardware was not there, but I could find most of it locally. The only exception being the
plate that supports the 2 rear wing attachment screws that attaches the wing to the fuselage.
I have attached a photo, from the manual, of this part and would ask that you please send one to me.
My second concern has to do with the wings. When I unpacked them and had them next to the fuselage,
they were nowhere near the same color. They were noticeably darker in color and when assembled their
fit to the fuselage was possible, but not great. Upon closer inspection, I also found that the servo cutout
under the wing cover measured 20 mm x 60 mm. This is far too large to accommodate any typical, available servo and would compromise security of servo a/o leave an unsecured area of covering. To my knowledge this model is not offered in the color of these wings. It would, almost, seem that they are not for the Extra 500. Again, I have attached photos show that show color differential and the servo cutout. I would imagine a skilled builder, with considerable effort, might remedy the cutout problem and I could scab some kind patch and end up with usable off-colored (esthetics be damned) Extra 550.
I looked forward to hearing you on the attachment plate and any comments you have on the wing.
Hello,
I recently sent the attached email to support (1/16/2013) and so far have received no reply.
This was also the result for the last plane i purchase from nitromodels.
Can someone respond and comment on what my options may be to resolve the problem.[img]C:%5CDocuments%20and%20Settings%5Cxxx%5CMy%20Docum ents%5CMy%20Pictures%5CExtra%20500%20009.jpg;%20C: %5CDocuments%20and%20Settings%5Cxxx%5CMy%20Documen ts%5CMy%20Pictures%5CExtra%20500%20017.jpg;%20C:%5 CDocuments%20and%20Settings%5Cxxx%5CMy%20Documents %5CMy%20Pictures%5CExtra%20500%20011.jpg;[/img]
kafton
New Version 2 Extra 500 90A208Y-Gas-Extra500-Yellow
I recently purchased this model from Nitro Models and tried to inventory the enclosed
parts and pieces, per the parts list (A VERY SMALL PHOTO OF TINY PARTS).
I manage to identify most of them and started to assemble the fuselage, where I found
some of the hardware was not there, but I could find most of it locally. The only exception being the
plate that supports the 2 rear wing attachment screws that attaches the wing to the fuselage.
I have attached a photo, from the manual, of this part and would ask that you please send one to me.
My second concern has to do with the wings. When I unpacked them and had them next to the fuselage,
they were nowhere near the same color. They were noticeably darker in color and when assembled their
fit to the fuselage was possible, but not great. Upon closer inspection, I also found that the servo cutout
under the wing cover measured 20 mm x 60 mm. This is far too large to accommodate any typical, available servo and would compromise security of servo a/o leave an unsecured area of covering. To my knowledge this model is not offered in the color of these wings. It would, almost, seem that they are not for the Extra 500. Again, I have attached photos show that show color differential and the servo cutout. I would imagine a skilled builder, with considerable effort, might remedy the cutout problem and I could scab some kind patch and end up with usable off-colored (esthetics be damned) Extra 550.
I looked forward to hearing you on the attachment plate and any comments you have on the wing.
Eric
#495
Senior Member
Join Date: Sep 2010
Location: la puente, CA, UNITED KINGDOM
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
ORIGINAL: KAFTON
Eric
The order number is- yhst-17210252890263-245625
kafton
Eric
The order number is- yhst-17210252890263-245625
kafton
Hi
I will get those hardwarebags shipping out for you today, I will try to find it in the back of the warehouse if I cant find it. I will open a new one ship it out for you.
Eric
#496
Junior Member
Join Date: Jan 2012
Location: , IA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
just so you know, you have to take what eric says with a grain of salt, he often makes statements that turn out to be less than accurate and routinely fails to follow through on commitments he makes, right Eric?
#497
Senior Member
My Feedback: (1)
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
flyowa, not true with me. He did exactly what he said he'd do and did it promptly. I had the replacement for the damaged piece in less than a week, and that was almost all shipping time (I'm on the east coast).
#498
Junior Member
Join Date: Nov 2010
Location: Newton,
IA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
Eric
Recieved the pack of items for the 500 Extra, Thank you very much!
Your response to my problem was outstanding.
'"FLYOWA" owes you an apology.
Kafton
Recieved the pack of items for the 500 Extra, Thank you very much!
Your response to my problem was outstanding.
'"FLYOWA" owes you an apology.
Kafton
#499
Senior Member
Join Date: Sep 2010
Location: la puente, CA, UNITED KINGDOM
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
ORIGINAL: KAFTON
Eric
Recieved the pack of items for the 500 Extra, Thank you very much!
Your response to my problem was outstanding.
'"FLYOWA" owes you an apology.
Kafton
Eric
Recieved the pack of items for the 500 Extra, Thank you very much!
Your response to my problem was outstanding.
'"FLYOWA" owes you an apology.
Kafton
Eric
#500
Junior Member
Join Date: Jan 2012
Location: , IA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
Oh I'm sure many people get lucky, but if you look at the complaints, it's a matter of when they;re good everything is rosy, when they screw up, either intentionally or accidiently, it can be a nightmare trying to get it resolved in a fair manner, as their history with the BBB shows, and that pesky lawsuit they lost would be an indicator of a lack of ethics as well right eric? how much did your company lose in that lawsuit eric?