ARIXTRA, new french F3A design
#77
My Feedback: (71)
RE: ARIXTRA, new french F3A design
ORIGINAL: jarvis johnson
Hey Wattsup
Dave Lockhart, won the 2011 Nat's using a Neu F3A motor and not a Hacker Q-60, Dave has been using the Neu motor for the last few years.
In fact , I dont know of anyone that used the Q-60 at the 2011 Nat's, there were some Q-80 used. I own to Q-60, an I'm not happy with that motor so I went back to using my Himax 6330-210
Hey Wattsup
Dave Lockhart, won the 2011 Nat's using a Neu F3A motor and not a Hacker Q-60, Dave has been using the Neu motor for the last few years.
In fact , I dont know of anyone that used the Q-60 at the 2011 Nat's, there were some Q-80 used. I own to Q-60, an I'm not happy with that motor so I went back to using my Himax 6330-210
#79
Member
Thread Starter
Join Date: Nov 2003
Location: Rouxmesnil Bouteilles, Seine Maritime 76, , FRANCE
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
RE: ARIXTRA, new french F3A design
Hello,
News pics of my Arixtra, probably finished late january, I hope !!!
Happy new year everybody !!!!!!!!!!!!!!!!!! see you soon on 2012 ;-)
Frederic
News pics of my Arixtra, probably finished late january, I hope !!!
Happy new year everybody !!!!!!!!!!!!!!!!!! see you soon on 2012 ;-)
Frederic
#81
Member
Join Date: Feb 2006
Location: Cedar Park,
TX
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
RE: ARIXTRA, new french F3A design
#84
Member
Thread Starter
Join Date: Nov 2003
Location: Rouxmesnil Bouteilles, Seine Maritime 76, , FRANCE
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
RE: ARIXTRA, new french F3A design
Hello !
I'm very busy also I I'll finished wings and stab in two or three weeks and my fuselage is painting by a friend late mid february, next pics at this time, sorry !!!
Frédéric
I'm very busy also I I'll finished wings and stab in two or three weeks and my fuselage is painting by a friend late mid february, next pics at this time, sorry !!!
Frédéric
#85
Member
Thread Starter
Join Date: Nov 2003
Location: Rouxmesnil Bouteilles, Seine Maritime 76, , FRANCE
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
RE: ARIXTRA, new french F3A design
Hello,
Few pics after long time with any building....I begin wing covering with Oracover, same color scheme of my Twister and Xigris...just more two white stripes on the wing and stab, fuse will be painting later by a friend because I'm not equipped for this.
Frédéric
Few pics after long time with any building....I begin wing covering with Oracover, same color scheme of my Twister and Xigris...just more two white stripes on the wing and stab, fuse will be painting later by a friend because I'm not equipped for this.
Frédéric
#87
Member
Join Date: Apr 2011
Location: Stoke On Trent, UNITED KINGDOM
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
RE: ARIXTRA, new french F3A design
Realy nice plane ..
Sorry guys for my funny english
But webside is not so good. Im registered user and i cant bay anything with shipping to UK.
Info- pack is more heave than 30 kg and is impossible delivery to my town.
Pascal- You have an email from me.
y...composites.
Sorry guys for my funny english
But webside is not so good. Im registered user and i cant bay anything with shipping to UK.
Info- pack is more heave than 30 kg and is impossible delivery to my town.
Pascal- You have an email from me.
y...composites.
#89
Member
Join Date: Jul 2008
Location: ORANJESTAD, ARUBA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
RE: ARIXTRA, new french F3A design
Hallo Frederic,
So all the kits basic and classic you have to drill the holes yourself in the foam for the wings and stabs?.
Do the kits come with adjustable wing and stabs adjusters?.
Thanks.
So all the kits basic and classic you have to drill the holes yourself in the foam for the wings and stabs?.
Do the kits come with adjustable wing and stabs adjusters?.
Thanks.
#90
Member
Thread Starter
Join Date: Nov 2003
Location: Rouxmesnil Bouteilles, Seine Maritime 76, , FRANCE
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
RE: ARIXTRA, new french F3A design
Hello,
I don't know if the hole is drilled, mine is not drilled but I've a pre-serie kit, with the commercial kit actually you must contact Pascal Nowik at Aerocompet, I'm just a friend and I don't work with or for Aerocompet.....contact him at http://www.aerocompet.fr/mag/fr/contact.php for more answers.
Frédéric
I don't know if the hole is drilled, mine is not drilled but I've a pre-serie kit, with the commercial kit actually you must contact Pascal Nowik at Aerocompet, I'm just a friend and I don't work with or for Aerocompet.....contact him at http://www.aerocompet.fr/mag/fr/contact.php for more answers.
Frédéric
#91
Member
Join Date: Jul 2008
Location: ORANJESTAD, ARUBA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
RE: ARIXTRA, new french F3A design
Hi Frederic thanks for your help,I did send a mail to Aerocompet but haven't got an answer yet!!.
What size spinner u use for the Arixtra?.
What control horns are you planning on using for ailerons,elevator and rudder?.
Best regards.
What size spinner u use for the Arixtra?.
What control horns are you planning on using for ailerons,elevator and rudder?.
Best regards.
#92
Member
Join Date: Apr 2011
Location: Stoke On Trent, UNITED KINGDOM
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
RE: ARIXTRA, new french F3A design
Ihave the same problem.
7 days i wish to make a purchase few parts like fuselage, canopy, cowl and i dont have a chance to do it. No contact. No information. 7 days via aerocompet and via email to Pascal.
Only one answer- "i will answer this week -Pascal" . I hope there is nothing wrong with him.
7 days i wish to make a purchase few parts like fuselage, canopy, cowl and i dont have a chance to do it. No contact. No information. 7 days via aerocompet and via email to Pascal.
Only one answer- "i will answer this week -Pascal" . I hope there is nothing wrong with him.
#93
Join Date: Apr 2002
Location: NETHERLANDS
Posts: 668
Likes: 0
Received 0 Likes
on
0 Posts
RE: ARIXTRA, new french F3A design
I've got mine from Aerobertics:
http://www.aerobertics.be/productDet...cat=1&brand=44
http://www.aerobertics.be/productDet...cat=1&brand=44
#94
Member
Thread Starter
Join Date: Nov 2003
Location: Rouxmesnil Bouteilles, Seine Maritime 76, , FRANCE
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
RE: ARIXTRA, new french F3A design
ORIGINAL: GiMsAcE
Hi Frederic thanks for your help,I did send a mail to Aerocompet but haven't got an answer yet!!.
What size spinner u use for the Arixtra?.
What control horns are you planning on using for ailerons,elevator and rudder?.
Best regards.
Hi Frederic thanks for your help,I did send a mail to Aerocompet but haven't got an answer yet!!.
What size spinner u use for the Arixtra?.
What control horns are you planning on using for ailerons,elevator and rudder?.
Best regards.
I use Secraft control horns with M3 Kato ball bearing for ailerons and elevator and M2 Kato for rudder and I use Marquet carbon spinner, size of fuselage is 82 mm but I try to use a 75 mm size for air cooling around the spinner like Matt "Citrin".
Fuse isn't painting also no more pics........I hope mid march later and end of march for the first flying test !!!
Frédéric