Pics of your Hobby shop or room?
#26
Senior Member
Join Date: Oct 2002
Location: Hurricane, WV
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pics of your Hobby shop or room?
Hello All,
Here is my shop. I extended the garage by twelve feet and now I have a workshop between the garage and the house.
Ripley
Here is my shop. I extended the garage by twelve feet and now I have a workshop between the garage and the house.
Ripley
#27
Join Date: Feb 2008
Location: San Juan Capistrano,
CA
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pics of your Hobby shop or room?
WOW!! Two guys with RC motorcycles in their shops! Seen plenty of "rice burner" RC bikes, but the Harley Hog is interesting! Brushless or Nitro:??? ;^ P
#28
Senior Member
Join Date: Jan 2012
Location: Danville,
GA
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pics of your Hobby shop or room?
ORIGINAL: Altered1
what's a workshop?
I claim a 1 foot by 3 foot space on top of the liqour cabinet...
what's a workshop?
I claim a 1 foot by 3 foot space on top of the liqour cabinet...
Or maybe downing a few shots is why the build is not going as expected - LOL
#33
Member
Join Date: Oct 2009
Location: Mount Airy,
NC
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pics of your Hobby shop or room?
rye Nice hobby room, & planes and I love that Boat with the Tank in it. (I know what it is, just can't think of the name) Is it a PT Boat?
#34
My Feedback: (10)
RE: Pics of your Hobby shop or room?
no but i do have a 5' pt boat that was scatach build but thats a 5' lcm for my 1/16 scale rc tanks youtube video
http://www.youtube.com/watch?v=m87ls...5&feature=plcp
http://www.youtube.com/watch?v=kZtiC...eature=related
http://www.youtube.com/watch?v=m87ls...5&feature=plcp
http://www.youtube.com/watch?v=kZtiC...eature=related
#35
RE: Pics of your Hobby shop or room?
ORIGINAL: TotalWreck
Nice hobby work shops and rooms above. Here is my little room, just a spair bedroom in my trailer.
Nice hobby work shops and rooms above. Here is my little room, just a spair bedroom in my trailer.
I am at present using what ever corner or space is momentarily handy since getting booted off the kitchen table.
#36
My Feedback: (29)
RE: Pics of your Hobby shop or room?
ORIGINAL: Hill202
Well if you do, we're gonna have to change the name of this thread
I ride too [8D]
ORIGINAL: Seamus OLeprosy
I'd post a picture of my wife naked rather than the shame of
I'd post a picture of my wife naked rather than the shame of
my workshop:-)
I ride too [8D]
#37
Senior Member
My Feedback: (1)
Join Date: Feb 2011
Location: DeLand, FL
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pics of your Hobby shop or room?
ORIGINAL: TotalWreck
rye Nice hobby room, & planesand I love that Boat with the Tank in it. (I know what it is, just can't think of the name) Is it a PT Boat?
rye Nice hobby room, & planesand I love that Boat with the Tank in it. (I know what it is, just can't think of the name) Is it a PT Boat?
#39
RE: Pics of your Hobby shop or room?
TotalWreck (post 29 above) your 2nd picture gave me the idea.This apartment has small 2nd bedroom/den That I am using to build in. Today I bought 4 angel brakets. The long arm is 12" long. I added a 1x2 12" long to the 12 inch arm on 2 brackets and a 1x2 24" long on the othe 2 brackets. I drilled 1/4" holes every 2" about 1/2" deep. I used a depth stop callor so I would not accidently drill all the way thru. I cut a 1/4" dowel into 2" lengths, and use these as pegs. These will stop wings from sliding foward and falling off the brackets. I also use the pegs to make sure fuselages stay put, allthough they should not slide on there on.I am still at this time building on a card table. I put a piece of 2" pink foam on top of it and a piece of 1/4" MDF on top of that. I have a magnetic building board that I then put on top of the MDF.A little crude, but for now it works. When finances permit I am going to get an oak work bench from Harbor Frieght And use that as my buiding table.
www.harborfreight.com/garage-shop/workbench/60-inch-solid-oak-workbench-93454.html
www.harborfreight.com/garage-shop/workbench/60-inch-solid-oak-workbench-93454.html
#42
Join Date: Aug 2008
Location: Cincinnati,
OH
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pics of your Hobby shop or room?
Hi Guys, It's been a while since I sent photos of my shop, but I've not forgotten this post. So as I was cruising the net (looking for "Powered Gliders" this morning I came across this guy's shop and thought you too might want to eat-your-hearts-out with me.
[link]http://www.youtube.com/watch?NR=1&feature=endscreen&v=zMeBa_xOAsg
[/link]http://www.youtube.com/watch?NR=1&feature=endscreen&v=zMeBa_xOAsg
Mike Kennedy
[link]http://www.youtube.com/watch?NR=1&feature=endscreen&v=zMeBa_xOAsg
[/link]http://www.youtube.com/watch?NR=1&feature=endscreen&v=zMeBa_xOAsg
Mike Kennedy
#44
My Feedback: (7)
RE: Pics of your Hobby shop or room?
No one is utilizing ceiling space except Kostas?
This is a 26'X13' room. when I built the garage I split half for my real cars/trucks projects (65 Mustang bottom to top build right now) and the other half for my hobbies.
I am ready to start a scratch built 80"X40" bench.
I forgot my flying trailer. I can build/repair in it also.
This is a 26'X13' room. when I built the garage I split half for my real cars/trucks projects (65 Mustang bottom to top build right now) and the other half for my hobbies.
I am ready to start a scratch built 80"X40" bench.
I forgot my flying trailer. I can build/repair in it also.
#46
Junior Member
Join Date: May 2012
Location: Guatemala, GUATEMALA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pics of your Hobby shop or room?
OMG, my work room is a mess, but I will post some pics, so you can have a clue how much work I need to put my planes and boats in shape again. But its really a mess, that will make me a bit ashamed comparing all of yours [&o]
#47
My Feedback: (7)
RE: Pics of your Hobby shop or room?
Thx Kostas1, It really gets them out of the way to add more planes..lol
Take a look at the pvc hangers I made up on the two planes, Quick cheap and much easier to get the plane down when you need/want to. I made them up for each plane seperately. as you see I need to get a few more built.
Take a look at the pvc hangers I made up on the two planes, Quick cheap and much easier to get the plane down when you need/want to. I made them up for each plane seperately. as you see I need to get a few more built.
#50
Junior Member
Join Date: May 2012
Location: Guatemala, GUATEMALA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pics of your Hobby shop or room?
Here is my very dusty and zombie populated work room. Lots of stuff from the 70's-80's
If you see something you would like to know, or that you can see on the background, ask, I will be glad to share!
If you see something you would like to know, or that you can see on the background, ask, I will be glad to share!