DLE 20cc Gasser! (Data & Links 1st Post)
03-18-2012, 07:16 PM
#5251
Join Date: Oct 2005
Location: White Lake,
MI
Posts: 1,523
Likes: 0
Received 0 Likes
on
0 Posts
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
Thanks rhd any idea where I could find a spinner that would fit the engine without chasing parts[
] I have heard of people using the skyshark spinner on the butcher but don't know if I will be chasing parts like I am now. I will see if I can find the link to the skyshark spinner.
] I have heard of people using the skyshark spinner on the butcher but don't know if I will be chasing parts like I am now. I will see if I can find the link to the skyshark spinner.
03-18-2012, 07:36 PM
#5252
Senior Member
My Feedback: (5)
Join Date: Nov 2011
Location: bakersfield,
CA
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
ORIGINAL: acdii
Just drop 2 10oz tanks in, then you have enough of both!
Just drop 2 10oz tanks in, then you have enough of both!
03-19-2012, 11:31 AM
#5253
Senior Member
My Feedback: (5)
Join Date: Nov 2011
Location: bakersfield,
CA
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
just thought about this though. Will having the fuel tank lower cause any issues with this engine? Is the pump strong enough to pull fuel up a couple inces, or do I need to lift the tank up?
Thanks
Thanks
03-19-2012, 11:32 AM
#5254
Senior Member
My Feedback: (5)
Join Date: Nov 2011
Location: bakersfield,
CA
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
just thought about this though. Will having the fuel tank lower cause any issues with this engine? Is the pump strong enough to pull fuel up a couple inces, or do I need to lift the tank up?
Thanks
Thanks
03-19-2012, 07:38 PM
#5257
Join Date: Oct 2005
Location: White Lake,
MI
Posts: 1,523
Likes: 0
Received 0 Likes
on
0 Posts
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
Guys Im in here scrolling through the pages looking for the throttle setup diagrams. Can anyone save me some time and tell me what page they are on. Thanks Dave
03-19-2012, 07:40 PM
#5258
Join Date: Oct 2005
Location: White Lake,
MI
Posts: 1,523
Likes: 0
Received 0 Likes
on
0 Posts
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
Guys Im in here scrolling through the pages looking for the throttle setup diagrams. Can anyone save me some time and tell me what page they are on. Thanks Dave
03-19-2012, 07:41 PM
#5259
Join Date: Oct 2005
Location: White Lake,
MI
Posts: 1,523
Likes: 0
Received 0 Likes
on
0 Posts
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
Guys Im in here scrolling through the pages looking for the throttle setup diagrams. Can anyone save me some time and tell me what page they are on. Thanks Dave
03-19-2012, 09:11 PM
#5261
Senior Member
My Feedback: (5)
Join Date: Nov 2011
Location: bakersfield,
CA
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
ORIGINAL: a1pcfixer
It'll be fine, no need to lift it higher.
It'll be fine, no need to lift it higher.
03-20-2012, 05:35 AM
#5262
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
I know this is probably in the thread some where, but does anyone know what the Walbro replacement part number is? My butterfly plate came loose as well and rubbed some grooves in the housing. I'd like to replace it with a Walbro. Thanks.
03-20-2012, 06:55 AM
#5264
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
ORIGINAL: unclecrash
Guys Im in here scrolling through the pages looking for the throttle setup diagrams. Can anyone save me some time and tell me what page they are on. Thanks Dave
Guys Im in here scrolling through the pages looking for the throttle setup diagrams. Can anyone save me some time and tell me what page they are on. Thanks Dave
03-20-2012, 11:44 AM
#5266
My Feedback: (7)
Join Date: Aug 2004
Location: La Porte,
IN
Posts: 2,505
Likes: 0
Received 0 Likes
on
0 Posts
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
ORIGINAL: Steve
I know this is probably in the thread some where, but does anyone know what the Walbro replacement part number is? My butterfly plate came loose as well and rubbed some grooves in the housing. I'd like to replace it with a Walbro. Thanks.
I know this is probably in the thread some where, but does anyone know what the Walbro replacement part number is? My butterfly plate came loose as well and rubbed some grooves in the housing. I'd like to replace it with a Walbro. Thanks.
Walbro carb equivalent for the DLE20 is WT793.
03-20-2012, 12:17 PM
#5267
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
ORIGINAL: a1pcfixer
Walbro carb equivalent for the DLE20 is WT793.
ORIGINAL: Steve
I know this is probably in the thread some where, but does anyone know what the Walbro replacement part number is? My butterfly plate came loose as well and rubbed some grooves in the housing. I'd like to replace it with a Walbro. Thanks.
I know this is probably in the thread some where, but does anyone know what the Walbro replacement part number is? My butterfly plate came loose as well and rubbed some grooves in the housing. I'd like to replace it with a Walbro. Thanks.
Walbro carb equivalent for the DLE20 is WT793.
03-20-2012, 12:22 PM
#5268
My Feedback: (7)
Join Date: Aug 2004
Location: La Porte,
IN
Posts: 2,505
Likes: 0
Received 0 Likes
on
0 Posts
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
Here's a real good way to check & set timing.....
[youtube]http://www.youtube.com/watch?v=GBXFpxWg7vY&feature=channel[/youtube]
[youtube]http://www.youtube.com/watch?v=GBXFpxWg7vY&feature=channel[/youtube]
03-20-2012, 03:13 PM
#5270
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
ORIGINAL: Steve
Thanks agian. Looks like the magnet is past the sensor when spark occurs. So I believe I've set it up right. I just can't believe it was that far out from factory.
Thanks agian. Looks like the magnet is past the sensor when spark occurs. So I believe I've set it up right. I just can't believe it was that far out from factory.
my dle20 was timed at 40 deg from the factory..... i later swapped out ignitions and used my back up Rcxcel ign and set the timing at 28 and it couldnt be any better
what i did have to do to the hall sensor was elongate the holes to shift(retard) the sensor over far enough to hit 28 deg
03-20-2012, 03:31 PM
#5271
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
ORIGINAL: MetallicaJunkie
my dle20 was timed at 40 deg from the factory..... i later swapped out ignitions and used my back up Rcxcel ign and set the timing at 28 and it couldnt be any better
Yea, I think that is what I'm going to have to do. I'll give it a test flight and see how it behaves where its at, then go 28* and see how much it changes. Thanks.
what i did have to do to the hall sensor was elongate the holes to shift(retard) the sensor over far enough to hit 28 deg
ORIGINAL: Steve
Thanks agian. Looks like the magnet is past the sensor when spark occurs. So I believe I've set it up right. I just can't believe it was that far out from factory.
Thanks agian. Looks like the magnet is past the sensor when spark occurs. So I believe I've set it up right. I just can't believe it was that far out from factory.
my dle20 was timed at 40 deg from the factory..... i later swapped out ignitions and used my back up Rcxcel ign and set the timing at 28 and it couldnt be any better
Yea, I think that is what I'm going to have to do. I'll give it a test flight and see how it behaves where its at, then go 28* and see how much it changes. Thanks.
what i did have to do to the hall sensor was elongate the holes to shift(retard) the sensor over far enough to hit 28 deg
03-21-2012, 07:34 PM
#5273
Join Date: Oct 2005
Location: White Lake,
MI
Posts: 1,523
Likes: 0
Received 0 Likes
on
0 Posts
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
ORIGINAL: acdii
wow this thread blew up. 500 internal server errors, and multiple duplicate posts.
wow this thread blew up. 500 internal server errors, and multiple duplicate posts.
Ya the multiple posts was happening because I kept getting the server error, but it never showed me it went through.
03-21-2012, 07:40 PM
#5274
Join Date: Oct 2005
Location: White Lake,
MI
Posts: 1,523
Likes: 0
Received 0 Likes
on
0 Posts
RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
ORIGINAL: acdii
Oh I can use that too for the Dewey. Never considered putting the servo arm at 0* to the carb.
Oh I can use that too for the Dewey. Never considered putting the servo arm at 0* to the carb.
