DLE 111
#1
Thread Starter
DLE 111
Does anyone know if you can reverse the rotation on this engine to use it as a pusher ? I cant find much info on it , I have read small amounts but nothing concreate
#4
Join Date: Sep 2006
Location: The Sunshine state, when it's not raining!
Posts: 8,131
Likes: 0
Received 2 Likes
on
2 Posts
RE: DLE 111
The simpliest way would be to buy a strap on pick-up. There's one here, just scroll down a little 11.95 universal timing clamp. http://www.rcextremepower.net/ignitions.html
#7
Thread Starter
RE: DLE 111
Not flying< its for an RC Airboat. I just figured I could get more answers from the Plane guys...lol I'm looking for a beast of an engine. one that will push a 55 x 30 inch hull
#8
Thread Starter
RE: DLE 111
There is not a large selection of props in the pusher catagory. I would just rather reverse the rotation so I would have a better selection. Zinger only makes wood props, Right ? They dont do well when they come in contact with water...lol
#9
Senior Member
My Feedback: (48)
Join Date: Dec 2003
Location: Millington,
MI
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
RE: DLE 111
ORIGINAL: jetG23
Does anyone know if you can reverse the rotation on this engine to use it as a pusher ? I cant find much info on it , I have read small amounts but nothing concreate
Does anyone know if you can reverse the rotation on this engine to use it as a pusher ? I cant find much info on it , I have read small amounts but nothing concreate
#11
My Feedback: (1)
Join Date: Jun 2003
Location: Coffs Harbour NSW, AUSTRALIA
Posts: 2,306
Likes: 0
Received 1 Like
on
1 Post
RE: DLE 111
ORIGINAL: acerc
tande. Not one for argueing but how do you come to that conclusion. My understanding is it's just an open port.
tande. Not one for argueing but how do you come to that conclusion. My understanding is it's just an open port.
Menz make pusher props in most sizes. I bought a matched pair from Menz for the two counter rotating G62 in my Cessna 421
#12
Senior Member
My Feedback: (48)
Join Date: Dec 2003
Location: Millington,
MI
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
RE: DLE 111
ORIGINAL: acerc
tande. Not one for argueing but how do you come to that conclusion. My understanding is it's just an open port.
tande. Not one for argueing but how do you come to that conclusion. My understanding is it's just an open port.
#16
Senior Member
My Feedback: (1)
RE: DLE 111
ORIGINAL: tande
Yes....you can get it to run the other direction.....but not as strong.....the intake manifold (cast as part of the crankcase), is "Directional".....
ORIGINAL: jetG23
Does anyone know if you can reverse the rotation on this engine to use it as a pusher ? I cant find much info on it , I have read small amounts but nothing concreate
Does anyone know if you can reverse the rotation on this engine to use it as a pusher ? I cant find much info on it , I have read small amounts but nothing concreate
I have.
jetG23,
Buy the universal positionsensor,set the timing at 28* BTDC,put the prop on backward and give it try, you may be surprised.
#17
Thread Starter
RE: DLE 111
Cool man, thanks !!! I dont have the engine yet. I didnt want to jump into it without knowing if it would run opposite.. it ought to make one heck of an Airboat engine !!
ORIGINAL: jedijod
Have you reversed a DLE111 and ran it the other direction, doesn't sound like it from your post.
I have.
jetG23,
Buy the universal positionsensor,set the timing at 28* BTDC,put the prop on backward and give it try, you may be surprised.
ORIGINAL: tande
Yes....you can get it to run the other direction.....but not as strong.....the intake manifold (cast as part of the crankcase), is "Directional".....
ORIGINAL: jetG23
Does anyone know if you can reverse the rotation on this engine to use it as a pusher ? I cant find much info on it , I have read small amounts but nothing concreate
Does anyone know if you can reverse the rotation on this engine to use it as a pusher ? I cant find much info on it , I have read small amounts but nothing concreate
I have.
jetG23,
Buy the universal positionsensor,set the timing at 28* BTDC,put the prop on backward and give it try, you may be surprised.