Bill Fleming

My Feedback: (35)

Hi Guys:

When changing the mode of a JR XP8103 transmitter, I'm, familiar with changing the stick mode electronically, but how about the digital trims. Are they swapped out or is there also an electronic process?

Thanks,

Bill

A.T.

Quote:

ORIGINAL: Bill Fleming Hi Guys: When changing the mode of a JR XP8103 transmitter, I'm, familiar with changing the stick mode electronically, but how about the digital trims. Are they swapped out or is there also an electronic process? Thanks, Bill

JRXP8103 is known as the JR X-3810 outside USA.

. JR XP-8103 orX-3810mode2->mode1 conversion
. JR - Service Menu - XP 8103 / X-3810 & 6102

Good pictorial which will assist is under
<dt>. TX Mode change - JR 7202

See also sub Section "Transmitter - Change Mode 1 <> 2 " under
"Transmitter - FAQ - Additions, Adjustments, Mode Change, Clonepacs & Repairs.." at:
Alan's Hobby, Model & RC FAQ Web Links

Alan T. </dt>

slarty

Bill, I assume you are talking about the ADT version (3+1 trims) ?

If so then there is a process that entails both electronic and physical changes. Doesn't take long to do... pm me with an email address and I'll send you the info required.