YS 170 regulator
#1
Thread Starter
Join Date: Mar 2004
Location: Kongsberg, NORWAY
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
YS 170 regulator
The spacer between the regulator spring and the diaphragm comes in two versions, see picture. Is the one with more chamfering the latest version? Does both versions work OK?
Arnstein
Arnstein
#3
Thread Starter
Join Date: Mar 2004
Location: Kongsberg, NORWAY
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
RE: YS 170 regulator
The one without chamfering (left) was supplied with a diaphragm bought separately (spare part). The 170CDI engine I bought came the one to the right, as did the spare pump I bought. I will use the one with chamfering, most likely the “latest and greatest” as the chamfering is not incorporated in the injection molding, but done in a subsequent operation.
Arnstein