ASP 60 carb question
06-11-2012, 01:29 PM
#1
Member
Thread Starter
Join Date: May 2011
Location: Guilford,
CT
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
ASP 60 carb question
What is this small spring tensioned screw for? It is on the same side as the high-speed mixture valve, the other side is the low speed mixture and barrel valve stop.
07-03-2012, 10:58 AM
#2
Join Date: Nov 2005
Location: Poolesville, MD
Posts: 12,624
Likes: 0
Received 0 Likes
on
0 Posts
RE: ASP 60 carb question
That screw holds the throttle barrel in place.
It protrudes into the grove in the throttle barrel. It can be used as an idle stop as well, to prevent the throttle from closing completely.
Since we normally DO NOT want this, people unscrew it out slightly to permit the idle to close fully.
It protrudes into the grove in the throttle barrel. It can be used as an idle stop as well, to prevent the throttle from closing completely.
Since we normally DO NOT want this, people unscrew it out slightly to permit the idle to close fully.
