E Z Arf Models
#201
Senior Member
Join Date: Nov 2003
Location: Calgary, AB,
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Z Arf Models
The E Z ARF models are amazing looking! I have a brand new in the box Zero 45 and a P-51D Mustang! Never even been out of the bags and as new as day 1. I also have the retracts for both. If anyone wants to buy them......... shoot me an email @ [email protected]
I can't bring myself to build and keep them on the ground, and don't want to crash them because of how rare it would be to replace them........ So they live in my basement in their boxes.
I can't bring myself to build and keep them on the ground, and don't want to crash them because of how rare it would be to replace them........ So they live in my basement in their boxes.
#203
Join Date: May 2012
Location: Quezon City, PHILIPPINES
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Z Arf Models
Got an old Laser 200 from an old timer. I was about to sell for couple of bucks but then i saw this thread. I just realized that this kit is rare.
I didn't even know that the brand is " EZ" until Isaw one you have exactly the same Laser 200 as mine except mine is RED(turning orange - I told you it's really old).
Now, I'm planning to revive it. What should I do with the color?!?I just can't take it. Can I put paint on top?! Or cover it with monokote?! I'm just not sure if covering
is possible because it has a foam outside layering.
2nd, I have no idea how to mount my OS .61FX with the mount it came with.
The mount is like 10mm off. I'm not sure how you guys did it!
I'll post pictures soon. It's still in my Mom's house catching webs and dust.
I didn't even know that the brand is " EZ" until Isaw one you have exactly the same Laser 200 as mine except mine is RED(turning orange - I told you it's really old).
Now, I'm planning to revive it. What should I do with the color?!?I just can't take it. Can I put paint on top?! Or cover it with monokote?! I'm just not sure if covering
is possible because it has a foam outside layering.
2nd, I have no idea how to mount my OS .61FX with the mount it came with.
The mount is like 10mm off. I'm not sure how you guys did it!
I'll post pictures soon. It's still in my Mom's house catching webs and dust.
#205
Join Date: May 2012
Location: Quezon City, PHILIPPINES
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Z Arf Models
Thanks... so how thick should it be?!?
I'm just wondering if could still keep the centerline with that metal strip? Assuming it's 3mm... plus the small gap. that would be like 5mm off center?
I'm just wondering if could still keep the centerline with that metal strip? Assuming it's 3mm... plus the small gap. that would be like 5mm off center?
#206
My Feedback: (65)
Join Date: May 2002
Location: Tulare,
CA
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Z Arf Models
The gap in the mount is for clearance for the nuts. The plates were aproximatley 1/8" thick... and aproximately 1" wide. They had slotted holes so you could set the width relative to the engine you used. They bolted into the two holes on each beam on that mount. Then you set your engine on top of those....made the necessary alignments and marked the plates with the position of the holes from your engines mounting lugs.
Paul
Paul
#208
Join Date: May 2012
Location: Quezon City, PHILIPPINES
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Z Arf Models
Now it's making sense...
When I got this plane, it didn't come with those two metal sheets.. So I think I have to find it somewhere.
Thanks a lot!! I'll post pictures soon!
When I got this plane, it didn't come with those two metal sheets.. So I think I have to find it somewhere.
Thanks a lot!! I'll post pictures soon!
#209
Join Date: May 2012
Location: Quezon City, PHILIPPINES
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Z Arf Models
Hi!
Here's my EZ Laser 200
Got it second hand (with this condition).... and just realized it's rare. Any thoughts of how to bring back its original color?! Thinking of repainting it.. is possible?!
Also having problems with its very brittle plasic canopy.
Here's my EZ Laser 200
Got it second hand (with this condition).... and just realized it's rare. Any thoughts of how to bring back its original color?! Thinking of repainting it.. is possible?!
Also having problems with its very brittle plasic canopy.
#210
My Feedback: (2)
Join Date: Apr 2008
Location: Cody, WY
Posts: 758
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Z Arf Models
I had one just like it! Even had my high school senior photos taken with it...
Wrecked mine long ago, but still have a new, uncut cowl if you happen to need one. As for the color, that's too bad; looks like sun fade. Maybe a coat of red paint, but masking all the graphics would be a nightmare, and these planes didn't need any additional weight!
Wrecked mine long ago, but still have a new, uncut cowl if you happen to need one. As for the color, that's too bad; looks like sun fade. Maybe a coat of red paint, but masking all the graphics would be a nightmare, and these planes didn't need any additional weight!
#211
Join Date: May 2012
Location: Quezon City, PHILIPPINES
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Z Arf Models
Thanks! I don't mind with the additional weight... I might also give up the graphics!!! But I might also defeat the purpose of reviving it. I'm confused!
#213
My Feedback: (2)
Join Date: Apr 2008
Location: Cody, WY
Posts: 758
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Z Arf Models
I remember wanting one of those Supraflys! Had a BL Laser and a Dago Red P51; was pretty addicted to the EZ line at the time
Looking at that add, we are pretty spoiled today: you can get some really nice ARF's for $500 now!
Looking at that add, we are pretty spoiled today: you can get some really nice ARF's for $500 now!
#214
Senior Member
Join Date: Nov 2003
Location: Calgary, AB,
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Z Arf Models
ORIGINAL: wyo69cowboy
Looking at that add, we are pretty spoiled today: you can get some really nice ARF's for $500 now!
Looking at that add, we are pretty spoiled today: you can get some really nice ARF's for $500 now!
I wish they still were in buisness. I'd pay the extra money again and still, no problem.
#215
Senior Member
Join Date: Jun 2009
Location: Douglassville,
PA
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Z Arf Models
I had 3 of them a looooong time ago. Had an Extra 230, a Cessna and a Piper Cherokee which I still have but it's been in a crash. I just can't part with it. [] The thing had an O.S. .32F on it and was a rocket!
#216
My Feedback: (65)
Join Date: May 2002
Location: Tulare,
CA
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Z Arf Models
Well.....finally got it all finished up and flown with the OS 32SX..
What a screamer. Definately too much power but great when you can do vertical rolls while still climbing.
What a screamer. Definately too much power but great when you can do vertical rolls while still climbing.
#221
RE: E Z Arf Models
ORIGINAL: DYORD
Thanks! I don't mind with the additional weight... I might also give up the graphics!!! But I might also defeat the purpose of reviving it. I'm confused!
Thanks! I don't mind with the additional weight... I might also give up the graphics!!! But I might also defeat the purpose of reviving it. I'm confused!
Here is what happened to my Dallas Doll. Little bit aft CG, no forgiveness.
Chris...
#222
Junior Member
Join Date: Feb 2012
Location: Henderson,
NV
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Z Arf Models
52 jaws.
Just stumbled on your post with the Reno M. Looks great nice to see u built it. Was that the kit I sold ya awhile back two or so years ago ?
I after I sold it ended up finding another identical NIB . I'm planning on building it here soon.
I see your in Tulare I drive through a few times a year headed to Visalia to visit family. I'll hafto swing by the local field on my next
Pass through.
#223
My Feedback: (65)
Join Date: May 2002
Location: Tulare,
CA
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Z Arf Models
Actually this is the culmination of three assembled airplanes Ive bought at various swap meets and used varying parts to turn into one clean one. Was hoping it'd turn out ok and has so far. I still have a new in box kit which although Ill be honest.....I cant remember who from but must have been you :-)
I actually plan on assembling that one soon with an O.S. 35AX because I have one.
Would buy yours from you so I could have a spare if you decide to part with it someday.
Funny you come to Visalia.....know many people from there. Pop into our field when you come through. Where on the Farm show grounds north parking lot. You can see people flying from the freeway right after you pass the airport and see the electronic sign on the right just look that direction and if anyone is in the air you'll see them.
Paul
I actually plan on assembling that one soon with an O.S. 35AX because I have one.
Would buy yours from you so I could have a spare if you decide to part with it someday.
Funny you come to Visalia.....know many people from there. Pop into our field when you come through. Where on the Farm show grounds north parking lot. You can see people flying from the freeway right after you pass the airport and see the electronic sign on the right just look that direction and if anyone is in the air you'll see them.
Paul
#224
Senior Member
Join Date: Nov 2003
Location: Calgary, AB,
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Z Arf Models
If someone has a Electric Great Planes Reactor biplane arf kit(or something similar) kicking around............... I would be happy to trade them for my BNIB OK Model Company EZ P-51D Mustang. No point in me building it and flying it since I would be heartbroken if it didn't go well. Better for me to trade for an ARF that's still produced.