Gentle Lady gas to electric conversion
#1
Thread Starter
Join Date: Jun 2012
Location: , BC, CANADA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Gentle Lady gas to electric conversion
First post :-) maybe this should be in the newbie forum. I dug out my old Gentle Lady glider afterit satin the crawl space for 15 years. It has a Cox .049 engine and I'd like to convert it to electric. The radio gear is an Airtronics VG4R TX and 92765/72 RX. I bought a gsmodels T-18 motor controller and a C28-26-12 brushless outrunner motor. The guy at the hobby shop assured me that it would all work together. From the research I've done it says that I have to reverse the red and black wires in the connector from the controller to the receiver. I just wanted to confirm this before I made all of the magic smoke come out. The nicads in the TX and RX havn't been used for 15 + years. I should replace them, can I use lithium cells or should I look at finding nicads? I was planning to use a lithium battery that came with a recently purchased park flyer to run the motor.
TIA for your help.
TIA for your help.
#2
Thread Starter
Join Date: Jun 2012
Location: , BC, CANADA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RE: Gentle Lady gas to electric conversion
First flight, it all works but I'm really disappointed with the performance. I remember the 0.49 doing a much better job.
#3
Member
Join Date: Aug 2004
Location: Porto AlegreRio Grande do Sul , BRAZIL
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
RE: Gentle Lady gas to electric conversion
Recently I retired my old Airtronics radio gear... Are you still using it?
Here are the guts I removed from an old plane last week...
Here are the guts I removed from an old plane last week...
#4
Junior Member
My Feedback: (27)
Join Date: Jan 2002
Location: Roebuck , SC
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
RE: Gentle Lady gas to electric conversion
Hello
I also have a GEntile Lady Glider that I have converted to to Brushless,lipos ESc etc.Have not flown it yet yet. I used a mixture of stuff that I bought on E-bay used it appears to work,except am not sure what prop to use yet. The Esc has BEC (Battery eliminator Cicuit) but am still going to use the Rec. battery anyway (For nose Weight)
Using Lipo 3cell,800 MAH,ESC 30a, E- Flight 740Kv brushless motor,6' prop,Just guessing at this application,cannot find any good info on how to do this yet.
I also have a GEntile Lady Glider that I have converted to to Brushless,lipos ESc etc.Have not flown it yet yet. I used a mixture of stuff that I bought on E-bay used it appears to work,except am not sure what prop to use yet. The Esc has BEC (Battery eliminator Cicuit) but am still going to use the Rec. battery anyway (For nose Weight)
Using Lipo 3cell,800 MAH,ESC 30a, E- Flight 740Kv brushless motor,6' prop,Just guessing at this application,cannot find any good info on how to do this yet.
#5
Thread Starter
Join Date: Jun 2012
Location: , BC, CANADA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RE: Gentle Lady gas to electric conversion
I used a 6 x 4 fixed prop because that was what was on the gas engine. After I switched to a 8 x 4 folding prop it was much better. Almost over powered.