LiPo Questions
#1
Senior Member
Thread Starter
My Feedback: (4)
Join Date: Aug 2011
Location: horseheads, NY
Posts: 2,643
Likes: 0
Received 0 Likes
on
0 Posts
LiPo Questions
I've got two easy LiPo question for you guys...
1: When my brother in-law upgrades his Stampede to LiPo, will a 20c LiPo be sufficient enough? It has a Sidewinder SV2 and a 4600kv motor.
2: When I charge my Dynamite 5300mah LiPo, it will not charge to 5300mah. It stops at about 4800mah. Why is that?
1: When my brother in-law upgrades his Stampede to LiPo, will a 20c LiPo be sufficient enough? It has a Sidewinder SV2 and a 4600kv motor.
2: When I charge my Dynamite 5300mah LiPo, it will not charge to 5300mah. It stops at about 4800mah. Why is that?
#2
Senior Member
RE: LiPo Questions
what mah is the 20c batt? if it's 5k or above he should be fine.
your batt stops @ 4800 because it's not 100% empty, if it was it would be dead. low votage cutoff leaves some juice in there to protect the pack.
#5
Senior Member
Thread Starter
My Feedback: (4)
Join Date: Aug 2011
Location: horseheads, NY
Posts: 2,643
Likes: 0
Received 0 Likes
on
0 Posts
RE: LiPo Questions
The 20c lipo for the stampede is a 5000mah.
as for the charging, sounds good. I just wasn't sure as to why it was not topping out like the other lipo
as for the charging, sounds good. I just wasn't sure as to why it was not topping out like the other lipo
#6
Senior Member
Join Date: Mar 2005
Location: Kingston UK, but living in Athens, GREECE
Posts: 18,082
Likes: 0
Received 3 Likes
on
3 Posts
RE: LiPo Questions
ORIGINAL: cumminspower5.9
The 20c lipo for the stampede is a 5000mah.
as for the charging, sounds good. I just wasn't sure as to why it was not topping out like the other lipo
The 20c lipo for the stampede is a 5000mah.
as for the charging, sounds good. I just wasn't sure as to why it was not topping out like the other lipo