Theodomas

Ihave been researching on the forums for a few weeks and wanted to take a dive into my first RCvehicle purchase. Ihave built and flown model airplanes for the last 3 years and messed with RCboats some, so I do have some modeling experience. Iwanted some opinions on what would be the best upgrades to have as I am putting this roller together. Iam not sure as of yet that Ihave everything needed for a complete working kit, so Iwill itemize a list as upgrades are added.

Iplan to use this vehicle on dirt, Grass, gravel and pavement. We have a dirt track close to house as well which Iplan to run on. This truck will be bashed/jumped and raced for fun. Because of the distance to a hobby shop, Iorder most items online, so Ilike to have common items that wear or break on hand. Iknow this is going to cost alot more then my initial budget, but I want to do it right the first time around! Idon't want anything exotic for upgrades! Iwant solid, quality bolt ons that offer utilitarian purpose and Icould care less about eye candy.

Iam also running this post over at Ultimate RCforums, in which I will keep both updated on build list.


-


**As a Thankyou for whom-ever gives me the most useable/educated assistance finalizing this build, Iam offering a modest 25$ credit to US vendor of your choice. Iknow its nothing major, but my way of a thankyou for your assistance Keep assistance within constraints of already purchased items please. Only 1 credit will be issued to the person Ifeel has offered me the best assistance. Thanks again.

-


*ITEMSPURCHASEDSOFAR - (UPDATEDASBUILDCONTINUES)

-RC Vehicle - Traxxas Slash 4x4 ROLLER w/ Tires, and servo http://www.ebay.com/itm/Traxxas-Slas...tem4ab9850cf8-
-Body - Traxxas 4x4 ebay standard Slash body
-Charger - Thunder AC 6 w/ extra charging adapters
-Batteries - 2x - Gen Ace 2S, 40c, 5000 mha lipo's
-Radio - FlySky GT3B w/ receiver
-Castle Creations SHort Course SV2 Sidewinder ESC w/ NEU 1410 3800 kv Motor Combo (Using this ESC/Motor combo for warranty) (Not using the EZY motor/esc combo per SyCo_VeNoM 's insight)

- King Headz Motor mount/bearing/slipper bearing adapter
- Pro-Line 6082-00 ProTrac Suspension Kit Slash 4X4 Front/Rear Arms Champer Links - http://cgi.ebay.com/ws/eBayISAPI.dll...m=380443647434
- Various - 30wt shock oil, HPIheat sensor, stock servo rebuild kit, stock shock rebuild kit
-Novak 5160 5mm 32-Pitch Steel Pinion Gear 12T/13T/14T 3-Pack (Hope this will get me by for now with the 12/13/14)
-Traxxas 6898 Sway Bar Kit Slash 4x4
-RPM 80122 Rear Bumper Black Slash 4x4 Black
-RPM 80022 Front Bumper and Skid Plate Black Slash 4x4 Black
-RPMWheelie Bar



**ITEMSUNDERCONSIDERATION PENDINGREVIEWS

-Rear X-DUTY CVD Kit: Slash, Slash 4x4 http://www.amazon.com/gp/product/B00...A1BKVSJG1RNAQO
-Pro-Line Badlands 2.2 All-Terrain Truck Front/Rear (2) 1144-00 NI
- TKR6851PL – M6 Driveshafts and Steering Blocks for Slash/Stmpd 4×4 (front, for ProLine ProTrac) http://www.teknorc.com/shop/tkr6851p...oline-protrac/
- TKR6852PL – M6 Driveshafts and Hub Carriers for Slash/Stmpd 4×4 (rear, for ProLine ProTrac) http://www.teknorc.com/shop/tkr6852p...oline-protrac/
- SHOCKS - (Not sure here what Iwant to do. Should Irebuild the stocks or go new and why??
- MIP X-Duty CVD Axle, Front MIP10133

Many thanks in advance for assistance in getting my first build/roller running!!

Cody

SyCo_VeNoM

that will NOT work the slash 4X4 is WAY too heavy for that combo. It would work in a 2wd slash though.
I tried a 60A in mine and it was getting too hot. I went up to a HW SC8 ESC, and a 3500 kv motor off HK (cant remember which) I think the motor I got pulls like 80-90A's(why I went with the SC8)

Theodomas

Thanks for the heads up mate. Would this be a better combo? http://cgi.ebay.com/ws/eBayISAPI.dll...m=390427101870

savagecommander

much better

Theodomas

With a little research Ialso came across this combo here, that supports 3s as well. Any thoughts on this ? http://www.funshobby.com/index.php/p...+SHIPPING.html

Iam sure there are other viable options, but Iwant to make sure i'm getting my money worth and open up upgrade possibilities.

Thanks !

Foxy

That's even better still.

Theodomas

**Thanks so much for the assistance! With some research and help from some members Ihave made a few more choices for additional parts. Which Spur/Pinion combo would be recommended for this set-up? Company/brand ?The motor is a 5mm shaft I believe. Also Iam looking to make a tire thats good for all occations (Bashing/Track). Will this fit the bill? http://www.ebay.com/itm/NEW-Pro-Line...item4d01424fb4

**As a Thankyou for whom-ever gives me the most useable/educated assistance finalizing this build, Iam offering a modest 25$ credit to vendor of your choice. Iknow its nothing major, but my way of a thankyou for your assistance Keep assistance within constraints of already purchased items please. Only 1 credit will be issued to the person Ifeel has offered me the best assistance. Thanks again.



*New Updated purchase additions

- King Headz Motor mount/bearing/slipper bearing adapter
- Castle Creations SHort Course SV2 Sidewinder ESC w/ NEU 1410 3800 kv Motor Combo (Using this ESC/Motor combo for warranty) (Not using the EZY motor/esc combo per SyCo_VeNoM 's insight)
- Pro-Line 6082-00 ProTrac Suspension Kit Slash 4X4 Front/Rear Arms Champer Links


*Already purchased

RC Vehicle - Traxxas Slash 4x4 ROLLER w/ Tires, and servo http://www.ebay.com/itm/Traxxas-Slas...item4ab9850cf8
Body - Traxxas 4x4 ebay standard Slash body
Charger - Thunder AC 6 w/ extra charging adapters
Batteries - 2x - Gen Ace 2S, 40c, 5000 mha lipo's
Radio - FlySky GT3B w/ receiver
Various - Extra Stock Spur/pinion, 30wt shock oil, HPIheat sensor, stock servo rebuild kit, stock shock rebuild kit



Thanks,

Cody

-

Theodomas

Doing some more research on my own, until the big wigs get around to answering.

**NEW ADDITIONS
-Novak 5160 5mm 32-Pitch Steel Pinion Gear 12T/13T/14T 3-Pack (Hope this will get me by for now with the 12/13/14)
-Traxxas 6898 Sway Bar Kit Slash 4x4
-RPM 80122 Rear Bumper Black Slash 4x4 Black
-RPM 80022 Front Bumper and Skid Plate Black Slash 4x4 Black
-Rear X-DUTY CVD Kit: Slash, Slash 4x4 (This part is a consideration now, based on input from others)



Cody

Theodomas

*ITEMSPURCHASEDSOFAR - (UPDATEDASBUILDCONTINUES)

-RC Vehicle - Traxxas Slash 4x4 ROLLER w/ Tires, and servo http://www.ebay.com/itm/Traxxas-Slas...tem4ab9850cf8-
-Body - Traxxas 4x4 ebay standard Slash body
-Charger - Thunder AC 6 w/ extra charging adapters
-Batteries - 2x - Gen Ace 2S, 40c, 5000 mha lipo's
-Radio - FlySky GT3B w/ receiver
-Castle Creations SHort Course SV2 Sidewinder ESC w/ NEU 1410 3800 kv Motor Combo (Using this ESC/Motor combo for warranty) (Not using the EZY motor/esc combo per SyCo_VeNoM 's insight)

- King Headz Motor mount/bearing/slipper bearing adapter
- Pro-Line 6082-00 ProTrac Suspension Kit Slash 4X4 Front/Rear Arms Champer Links - http://cgi.ebay.com/ws/eBayISAPI.dll...m=380443647434
- Various - 30wt shock oil, HPIheat sensor, stock servo rebuild kit, stock shock rebuild kit
-Novak 5160 5mm 32-Pitch Steel Pinion Gear 12T/13T/14T 3-Pack (Hope this will get me by for now with the 12/13/14)
-Traxxas 6898 Sway Bar Kit Slash 4x4
-RPM 80122 Rear Bumper Black Slash 4x4 Black
-RPM 80022 Front Bumper and Skid Plate Black Slash 4x4 Blac
- RPM Wheelie Bar


**ITEMSUNDERCONSIDERATION PENDINGREVIEWS (Thoughts and input on these items please!)

-Rear X-DUTY CVD Kit: Slash, Slash 4x4 http://www.amazon.com/gp/product/B00...A1BKVSJG1RNAQO
-Pro-Line Badlands 2.2 All-Terrain Truck Front/Rear (2) 1144-00 NIB
- TKR6851PL – M6 Driveshafts and Steering Blocks for Slash/Stmpd 4×4 (front, for ProLine ProTrac) http://www.teknorc.com/shop/tkr6851p...oline-protrac/
- TKR6852PL – M6 Driveshafts and Hub Carriers for Slash/Stmpd 4×4 (rear, for ProLine ProTrac) http://www.teknorc.com/shop/tkr6852p...oline-protrac/
- SHOCKS - (Not sure here what Iwant to do. Should Irebuild the stocks or go new and why??
- MIP X-Duty CVD Axle, Front MIP10133 x 2

Cody

SyCo_VeNoM

Personally if I were you I'd have just waited till you got the motor esc, radio, and roller and tried it out before going hog wild ordering the hop-ups
When I got my roller I was expecting a lot, and thought I'd love it, but once I used it 2 times I honestly can say I didn't care for it at all. I then spent $30ish and converted it to a pede 4X4 which I like WAYYY more

Theodomas

I hear ya! I love the SC trucks and watching the races. Iplan on building a MT closer to Xmas time, but am focusing on this build right now. Ihave the $$ saved and enjoy running the different SCT trucks that my friends have at the local track. We have some Losi, Associated, OFN, HPI and some others at the track. Ilike them all, but in the end Idecided to go with the Slash 4x4. Its all fun in the end and a learning experience



Cody

thehuntingterminator

I have heard great things about those MIP driveshafts, so I would get those for sure (stock Traxxas driveshafts aren't the best based on personal experience). But you should really only need the rears because they're what takes the most abuse. Also, those badlands tires should work great on most bashing surfaces, but keep in mind that if you ever want to run on the street, get the hardest compound available. This will reduce wear and promote long tread life. Let me know of anything else I can help you with.

Ashraine William

Hi, I can not find the products in this website , how about this ?http://www.funshobby.com/index.php/p...+SHIPPING.html

Hotled

Maybe because the thread is 3 years old and the product no longer exists?

chjhj

That's even better still.

xcghjh

That's even better still.

cvjhj

That's even better still.

xcghgh

That's even better still.