warbird_1

My Feedback: (61)

did you find out what caused the servo failures? what kind were they?

jet22b

I also vote for the pocketed RAF blue tee!!
Sonny
#12
aka
jet22b

Chad Veich

My Feedback: (60)

No collar here, a pocket-tee works just fine for me. Just make sure we can get them in at least XXL and XXXL might even be better.

MajorTomski

A TEE will Do For MEE TOO!

XXL please also

Warbirdguy

xxl for me also need room for expansion lol.

WBG

F4u5

My Feedback: (81)

Pocket Tee XXL

JEff #108

tevans55

Collared XL for me if that is an option. Don't wear T's.

Thanks for your work on this. Nice design.

flyntruk

My Feedback: (5)

   Collars ! We don't need no stinking collars !     (just jking )   A Tee for me please  XXL ....

Pitts532M

My Feedback: (1)

jet22b

I forgot to post my size!! XL, please!!
Sonny
#12
aka
jet22b

Moggy

My Feedback: (9)

Pocket Tee please XL

Chad Veich

My Feedback: (60)

Brothers,

I picked up a variety of colors of vinyl from a buddy of mine today and will try and get pricing for the Spitfire Brotherhood stickers all figured out tomorrow. As soon as I do I will provide you guys with a list of the colors I currently have as well as a couple of different sizes and the pricing to go with it. Thanks for your patience!

albsurfer

Either shirt would be good for me. And a sticker. The RAF blue colour sounds like a good idea. A LG as long is the material would pre-shrunk.

albsurfer #87
(Allen B.)

glazier808

My Feedback: (1)

No....thank you Chad!

Casey

WARBIRDRCER

My Feedback: (22)

Thanks Chad,

These will go great with our shirts.
Again thanks for the great idea for our logo.

Chad Veich

My Feedback: (60)

Here we go gents. I've decided that easiest way to go is just to charge $1.50 per sticker plus a dollar per order for shipping assuming you are in the USA. For our Brothers outside the USA I will have to check but shipping should not be more than a couple of dollars I would imagine. This price is for the standard size sticker seen here which is five inches across. If you absolutely need something bigger or smaller to fit a particular space just let me know. Just keep in mind it will get pretty hard to work with if you go too much smaller. Price per sticker will be the same unless you need something substantially larger than five inches. Regarding the colors if you really want a particular color that I don't have let me know and maybe we can work it out. I can cut these from Monokote trim sheets (or other brands of course) if you are trying to match a particular color scheme or something. You can either send me the material or I can pick it up at the LHS and you can pay me for it. Below is a pic of the colors I currently have on hand, to include white, red, royal blue, green, light grey, and brushed aluminum.



Here is how the sticker will arrive at your door.



The stickers can be weeded one of two ways depending on what end result you desire. All that is needed to weed them is a sharp hobby knife to simply pull out the negative areas. (Sorry for the blurry pic!)



Next you apply some tape to the entire face of the sticker. I don't recommend box tape like I used here! (too sticky) Masking tape works best and is translucent enough that you can see through it to position the sticker. Be sure to burnish the tape down over the sticker thoroughly.



Remove the paper backing.



And finally locate and aggressively burnish the sticker into place and then carefully remove the masking. (Be sure the surface you are sticking it to is clean and dry.) When removing the masking work very slowly to prevent pulling the vinyl up with the tape. If the vinyl starts to lift simply burnish it some more until it sticks. You sharp eyed Brothers will probably notice that the sticker below is not the same as that in the pictures above. That is because I got in a hurry and screwed up the first one! My advice, don't get in a hurry.



There you have it. If you would like some stickers just send me an email at the addy below with the total number you want and in what colors you would like them. Also, let me know if you would like your Spitfire Brotherhood number on the sticker and, if so, what your number is. Payment can be made via PayPal, money order, check, cash, whatever. I will be doing this in my down time so please allow a couple of weeks for delivery. Also, I have a limited amount of vinyl on hand so first come first serve. I can always get more vinyl but it may delay your order if I run out of the particular color you want.

Thanks guys!

Chad Veich
[email protected]

F4u5

My Feedback: (81)

Ditto +1 to what Casey says!

Jeff

WARBIRDRCER

My Feedback: (22)

From post:989

Here we go gents. I've decided that easiest way to go is just to charge $1.50 per sticker plus a dollar per order for shipping assuming you are in the USA. For our Brothers outside the USA I will have to check but shipping should not be more than a couple of dollars I would imagine. This price is for the standard size sticker seen here which is five inches across. If you absolutely need something bigger or smaller to fit a particular space just let me know. Just keep in mind it will get pretty hard to work with if you go too much smaller. Price per sticker will be the same unless you need something substantially larger than five inches. Regarding the colors if you really want a particular color that I don't have let me know and maybe we can work it out. I can cut these from Monokote trim sheets (or other brands of course) if you are trying to match a particular color scheme or something. You can either send me the material or I can pick it up at the LHS and you can pay me for it. Below is a pic of the colors I currently have on hand, to include white, red, royal blue, green, light grey, and brushed aluminum.

Chad,

Thanks again for your efforts.
My orders are coming soon.

scooter

you can put me down for two blue decals and a T shirt also a coller shirt med size if thay fit big small please

Chad Veich

My Feedback: (60)

My pleasure Steve, glad to be able to contribute to the Brotherhood in some small way. One of these days I will actually build the Spitfire I've been planning for the last 15 years!

jet22b

Chad;
Please put me down for 2 royal blue decals with the #12 on them. PM me when they are ready and I will pay you through Pay Pal.
Thank you!!!

Sonny
#12
aka
jet22b

jet22b

Chad;
Please put me down for 2 royal blue decals with the #12 on them. PM me when they are ready and I will pay you through Pay Pal.
Thank you!!!

Sonny
#12
aka
jet22b

Chad Veich

My Feedback: (60)

You got it Sonny!

scooter

Hi Chad I forgot to tell you my number is 86 . About the shirts when you havethe costs I may buy more
Thanks Scooter

Chad Veich

My Feedback: (60)

You got it Scooter.

I stuck one of the reverse image decals on my flight box today and I think I like it better than the other way around.