lrp motors on savage x 4.6
08-24-2012, 04:04 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2012
Location: mississauga, ON, CANADA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
lrp motors on savage x 4.6
So im getting an lrp motor and im wondering if the zr.30 would fit on the stock engine mount and if there is any mods i would need to do to make this engine fit. Thanks, A bit new to this ahah
08-24-2012, 05:27 PM
#2
Senior Member
Join Date: May 2009
Location: Colorado Springs, CO
Posts: 1,008
Likes: 0
Received 0 Likes
on
0 Posts
RE: lrp motors on savage x 4.6
You may have to file the inside of the motor mount for the motor to slide in. Other than that the motor will drop right in with no mods
, so are Dynamite DYNP5180.
08-24-2012, 08:37 PM
#5
Member
Join Date: Aug 2012
Location: Woodlandpark, NJ
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
RE: lrp motors on savage x 4.6
i have a lrp.30 the motor mount fits perfect u dont need to do anything i use the same fly wheel and you are going to need to upgrade the clutch shoes i use the ofna alumin shoes with the black spring that come with them good setup
08-26-2012, 04:10 PM
#9
Senior Member
Join Date: Apr 2009
Location: CHICAGOLAND,
IL
Posts: 1,856
Likes: 0
Received 0 Likes
on
0 Posts
RE: lrp motors on savage x 4.6
08-30-2012, 01:40 PM
#10
Junior Member
Thread Starter
Join Date: Aug 2012
Location: mississauga, ON, CANADA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
RE: lrp motors on savage x 4.6
Ok so i just got my .30 spec 2 and i was looking at the carb and the piece you attach the throttle too is on the other side what do i have to do not sure if you get what im saying please try to help me. Thanks
