Bruce Lund 28% Staudacher help with incedence
#1
Senior Member
Thread Starter
My Feedback: (8)
Join Date: Jul 2002
Location: Evanston,
WY
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
Bruce Lund 28% Staudacher help with incedence
I have a Bruce Lund Plan built 28% Staudache and it flies tail high the Incedence is set at 2.5 degrees does any one know what it is supposed to be.
I did not get the plans with the plane and need to reset it to where ever it should be.
Any help would be apperciated thank you Jim
I did not get the plans with the plane and need to reset it to where ever it should be.
Any help would be apperciated thank you Jim
#3
My Feedback: (62)
Join Date: Jan 2004
Location: Brooks,
MN
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
RE: Bruce Lund 28% Staudacher help with incedence
I recently aquired a Bruce Lund 28% staudacher thats 90% finished, but have no plans to go by on how far the spinner backplate is from the fire wall so that I can make a cowl and engine box, (i.e. standoff length etc.,etc.) could you tell me how far yours is from the firewall please? Also, if possible could you attach a good side view picture of the plane?
#4
Junior Member
Join Date: Dec 2005
Location: Stjordal, NORWAY
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RE: Bruce Lund 28% Staudacher help with incedence
I don't have this particular model, but I have just finished a scratch built Staudacher S300 33% (100" span), and during my early research I found this 3-view on which I based my build. Other images are the original and my humble model [sm=red_smile.gif]
Hope it is of some help.
Hope it is of some help.
#6
Junior Member
Join Date: Aug 2006
Location: Kingman,
AZ
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: Bruce Lund 28% Staudacher help with incedence
i have built the staudasher & have complete plans it flys great. sold it to a club member he put a gas engine in it he said its the best flying plane he has if you still need spec. let me know