glazier808

My Feedback: (1)

fokke,

Please don't go with a HK setup on your beautiful 109.... I think it deserves better! I've had great luck with the eflight systems, and AXI(although more expensive)

I've not had very good luck with the HK stuff I've bought(it all was scrapped....1 100amp ESC, and two 5 cell battery's....rubbish)

Casey

fokke

Brad, I'll send you on email

Viktor what airplanes you have for this electric motors ?

Casey, I'll think about AXI, will see Thanks

vik

My Feedback: (1)

ESM Ki84 (#1+2), ESM109
Now Flitesking 109 I got in box on Thursday (to be build)

fokke

Do you plan to make a topic here in RCU , the Fliteskin 109 is very good and quality kit

Where can I see your ESM109 with the AXI , can you halp me with some link good electric motor ?

glazier808

My Feedback: (1)

Nice Vic...how do you like the kit so far?

I hope to get back on mine later this month.

Casey

vik

My Feedback: (1)

Fokke I have no pictures of the 109 and it is sold now.
The ESM (KMP Ki84) is around here somewhere, but all photos are here: http://s575.photobucket.com/albums/s...2/ESM%20Ki-84/
And the Fliteskin - the quality is really nice and the packaging is top notch. I was lucky to buy some land so I will want to start house construction. And first finish the BT109E
So hopefully next winter.

glazier808

My Feedback: (1)

Congratulations Vic!

Casey

JÖRÖ

Best me109 ever seen!!! gratulations Rumen!
-Jukka-

fokke

WOWOWOWOW who see my eyes, one of the best scale modelers who I know Thank you very much Jukka, your opiniоn is a very important to me ,becаuse you are real artist in composite scale models who I know!
Thank you

fokke

Hey Vik, maybe you meant motor like this? http://www.e-fliterc.com/Products/De...odID=EFLM4160A

Can you tell me more about your ESC , how many amp , up 100 amp or? Something like this maybe ? http://www.e-fliterc.com/Products/De...odID=EFLA1080B

glazier808

My Feedback: (1)

Fokke, I have that power 160 in my ESM "Emil" and it's a beast! The plane weights 18.5 lbs, I'm using the castle creations 120hv v2, on a 20/10 Xoar prop. The same motor is in my Fliteskin "F" as well.

Casey

A good motor for the money I think.

GerKonig

That controller would not work Fokke. You need to look at 2 main numbers: Amperage, of course, but also how many lipo cells will it handle. You need one for 12 cells (high voltage). The one in the link is for 6.

Gerry

vik

My Feedback: (1)

Hallo Rumen,

Yes this motor would do the job.
For ESC I would recommend this one: http://www.espritmodel.com/castle-cr...hless-esc.aspx which is the same one as Casey has in his Emil and I use in Ki-84 as well as Emil (and same combo I want to use in the F)

Casey what prop do you use?

glazier808

My Feedback: (1)

20/10 Xoar

fokke

Hi guys , I bought one engine Fuji IMVAC BT-50SB 46.5cc. gas engine http://www.fuji-imvac.com/engines/fjig0047.html

[/URL]


[/URL]

For the next Messerschmit will be electric power

Orri

Hello Fokke,
a few years ago I started following your build, amazing job!
I've owned since a KMP Me 109 wich was a dissapointment all the way but I still love the looks of the Messerschmidt.
I have a MVVS 45cc IRS MG, do you think it will fit in the cowl?
Do you have a price for your beautiful full kit? (I live in Belgium)

Greetings

fokke

Hi Orri
Thanks for the good words , Yes I think that MVVS will be good for the Emil This is very nice engine

Yes I have price for the kit, I think that the shiping to Belgiumis not to much

Greetings

Orri

Thanx for the reply Fokke,

I think I know what my next project will be as soon as my Airworld Wilga is in the air...
(Hardest part left is convincing the wife that one needs to own this beautifull kit)

fokke

Something historica in this moment in Roswell New Mexico !!!!!


http://www.redbullstratos.com/live/

Slow Low

Thanks Rumen !!

fokke

Hi guys
So this is it, I am redy with the all stufs around my small and humble kit , composite , wood pards , manua , plans

This is the site : http://www.fokkerc.tk/index.php?opti...4-15&Itemid=56

Here you can see the manual : http://www.fokkerc.tk/downloads/INSTRnew2.pdf

77chickenhawk

Wow that is a truly fantastic kit. I would truly like to add this aircraft to my hangar one day soon. What does this kit run? I looked at the website and couldn't see any prices. I am sorry but I am pretty new to this thread I have poped in and out but don't know any facts. Are you also selling this kit yet or it's still In the process of getting put together??

Thank you for your time

Brad330l

My Feedback: (1)

fokke, this a awesome news and a great step in your journey.
I will email you for pricing (to Australia [X(] [:'(][:@])

Cheers,

Brad

glazier808

My Feedback: (1)

Amazing work again Fokke, and best wishes on selling the kits...It's nice to see such a great model being offered with such detail.

Bravo sir, bravo!

Casey

77chickenhawk

Yes I totally agree. IAM interested on what this kit is going to cost? Because this is one kit that has got to be in my hangar. This airplane is a complete and utter work of art!