jermainezey

change ing gears not going to help with the wheelies the .21 engine just have so much power i love it am so happy i put in the bigger engine

scott36

My Feedback: (54)

i did just rember that some gent had put a big block engine in the MINI MGT but he did add some Losi 420 size tires to make the gear change so the big engine could handle the bigger engine on the drive train.

scott36

My Feedback: (54)

http://www.integy.com/cgi-bin/webc.c...ml?p_catid=139

FeltRipper

cheers what affect would much larger tyres have to wheelies want to lessen if go with this engine?

scott36

My Feedback: (54)

iam thinking if you had put tires that are the size as say the AE Monster GT it would not wheelie as easy but iam just kinda guessing here.

jermainezey

the tire size seem not to help to keep the front end down the engine that i put in the truck just has so much more power then the stock engine i will take pics of the set up asap

jermainezey

here sum pics of my mini with a .21 engine and pro line tires and wheels

buttdud1122

ya dont get a toki 27, that engine sucks, and i dont think the tranny will handle a big block, it hardly handles the stock engine

srt10

My Feedback: (20)

does anyone have one of these trucks all blinged out with aluminum?
Pictures?
I would love to see how they look with lots of aluminum..
I'm still thinking of getting one and getting all the alumium parts for it
thanks

scott36

My Feedback: (54)

ya i did see a mini mgt all decked out on rcu here in the for sale section. looked to nice to drive tho.

ironman92

I got my mmgt3 in August 09 and I have chewed up the front diff gears once and the rear diff gears 3 times and I'm tired of replacing them. I have only ran the truck 6or 7 times since I got it and I am having the worst time trying not to chew up these gears and I don't even run it that hard. Can anyone help with my situation, I really like the truck and the engine runs great, I have a few gas guzzlers and I want to use this truck for when I'm low on fuel and $$$. Does anyone know of an upgrade kit for the diff gears? Is anyone having the same or simular problem? Please help! [:@]

jologs

My Mini MGT 3.0

dirtdemon6

I just dropped a Hot Bodies .26 into mine.   Just had to drill the holes in the chassis.  Only could fit three, used red locktite.   Run about a gallon so far with great power and no problems

jermainezey

post sum pics of it

MMGT

jologs, thats an awesome mmgt you have there! [X(]

•Ça£iƒ-J?e•

Just curious does anyone know of a good Dual Exhasust system on the MMGT 3.0 and where Imight be able to find the Engine upgrade kits? I am getting ready to rebuild my MMGT since Ipretty much totaled mine. So Iwant to do all metal bigger tires and think a stronger motor.. Thanks in advace.

~Joe

Barber420

My Feedback: (1)

Ironman92, it sounds to me like you're not shimming the diffs properly. If you have everything setup properly the diffs should only go out rarely.

jermainezey

if u go to www.neweramodels.com u can get the big block engine mount go to www.rc10.com u can get a .21 for 59.99 these the parts i have in my mgt 3.0 and its very fast n pop wheeliess all the time

buellboy

I have the same problem. I put four spider gears in the diff instead of two, you have to notch the shaft so both sit at the same level but it makes it a locked diff. works great but if you do too many dounuts your hub cuppler will blow out. looking for a steal upgrade now. Good luck.

bronx boy

i put a ring pipe from ofna on my mmgt what a difference my godson pulls wheelies front and backwards on grass no problem

nicko1998

hi Jologs,
Just seen your Mini mgt 3.0 that you have done in aliminum. It looks great, just wondering where you brought the parts from.
thanks

nicko1998

hi jologs
Just seen your mini mgt 3.0 in aliminum. It looks great, just wondered where you brought the parts from?

wildwilly420

TO GET A STOCK MGT 3.0 TO WHEELIE EZ,PUT HEAVIER SHOCK OIL AND STIFFERSPRINGS ONLY IN THE REAR.

wildwilly420

HERE IS MY MGT 3.0

bean-a-reano

..