Top Flite F8F-2 Bearcat Red Box Build
#176
Senior Member
Thread Starter
Join Date: Jan 2012
Location: Calgary, AB, CANADA
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite F8F-2 Bearcat Red Box Build
The Bearcat is parked in the basement for winter and she's still my favorite, but I'll move on to other projects for a while. I do plan to finish it properly with glass and paint and I've been slowly studying SolidWorks with the aim of creating a 3D model of the TF kit. Good intentions, but I need to finish my T-28 before I break open a new box.
#177
Junior Member
Join Date: Sep 2012
Location: Pretoria, SOUTH AFRICA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite F8F-2 Bearcat Red Box Build
Thanks , your build has been very proffesional and will help me when I start .
I ruined my canopy this morning trying to get a dent out , I've sent dionysusbacchus a PM to try get another , a royal one also seems to be a option as the plane is more or less the same size.
Good luck with the T-28
I ruined my canopy this morning trying to get a dent out , I've sent dionysusbacchus a PM to try get another , a royal one also seems to be a option as the plane is more or less the same size.
Good luck with the T-28
#178
Junior Member
Join Date: Oct 2012
Location: wheaton, IL
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite F8F-2 Bearcat Red Box Build
I just read your whole build today. Great read. What happened at the end? Did you ever finish it? Do you have pictures?
I agree thata glass finish is better but Monocoat gets it in the air faster.
Did you finish youCAD drawings of the parts?Is there any place to get the plans after 30+ years?
Thanks for your post its inspiring to read on a winter day!
#179
Junior Member
My Feedback: (1)
Join Date: Nov 2008
Location: Sacramento, CA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite F8F-2 Bearcat Red Box Build
You can still special order the plans from Top Flite. There are copies of the instruction manual available too.
http://www.top-flite.com/manuals/index.html
http://www.top-flite.com/manuals/index.html
#181
My Feedback: (2)
This is a follow-up to a reply I posted earlier. There is a great article in this months AMA Model Aviation magazine on washout. The redbox Bearcat was known for having a tendency for tip stalls. Very devastating, especially during landing. While it is too late to add it to your build, there is good info there and an aileron adjustment that can help aleviate the problem. I am doing it with mine.
Forwarned is forarmed.
Here is the web page:
http://www.modelaviation.com/washout
Forwarned is forarmed.
Here is the web page:
http://www.modelaviation.com/washout
Thanks for that link, you just saved me a bunch of grief...
I'm going to convert to electric and found this thread to be especially informative. It's good to see others take that plunge of cutting out battery hatches, you just gotta gut through it. Damn sure worth it though...
I hope Chinook got to fly it, that was a great build...
Last edited by ckd315; 08-22-2016 at 08:21 PM.
#183
My Feedback: (15)
G60
Centered mount
Magnets to gain access to rear firewall
6 cell sitting on the nose , top will be sealed access from bottom
6 cell largest pack I own for this amplication
Corsair cow
I know this thread is old news but anyhelp or advice is appreciated. I found n old Bearcat and converting it to epower .
Getting as much weight on the nose as possible but now worried about washout.
I wish scale cowls were still sold , seems all that stuff is long gone !
#184
Hey guys,
Got2retire here... I love a good challenge...
Here it is...
Bought a red box top flite f8f bearcat at a flea market ($15). Condition " salvageable, maybe"? Fuselage built, pretty well done... Wing, partially completed, not the best but salvageable...Canopy and cowling are there and good.. One wire landing gear...Some of the wood seems to be there, along with 4 page construction manual(???), but beyond that no plans. So here's where I could use some assistance.
Not sure there ever where “plans with the kit”. Although plans (????) seem to be available from Aerofred and others…. Again????
Anyone with plans willing to have a copy made, I would be grateful and would compensate you for time and trouble.
All my flying buddies have said, "trash it".... The gauntlet has been established...hahaha
Thanks for reading and any reply,
Got2retire (actually and finally) did….
Got2retire here... I love a good challenge...
Here it is...
Bought a red box top flite f8f bearcat at a flea market ($15). Condition " salvageable, maybe"? Fuselage built, pretty well done... Wing, partially completed, not the best but salvageable...Canopy and cowling are there and good.. One wire landing gear...Some of the wood seems to be there, along with 4 page construction manual(???), but beyond that no plans. So here's where I could use some assistance.
Not sure there ever where “plans with the kit”. Although plans (????) seem to be available from Aerofred and others…. Again????
Anyone with plans willing to have a copy made, I would be grateful and would compensate you for time and trouble.
All my flying buddies have said, "trash it".... The gauntlet has been established...hahaha
Thanks for reading and any reply,
Got2retire (actually and finally) did….