Balance plug question
#1
Member
Thread Starter
My Feedback: (6)
Join Date: Jan 2005
Location: Coeur d Alene ,
ID
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Balance plug question
Tota newbie to electric. Purchases a Hyperion EOS6061i charger at the swap. Came with three balance boards but nothing my Life 2100mah 6.6V batteries will plug into. The battery balance plug has only 3 pins and non of the boards have only thee pins. Four or more. What to do?
#3
Senior Member
My Feedback: (325)
Join Date: Mar 2003
Location: LaGrange, OH
Posts: 14,857
Likes: 0
Received 0 Likes
on
0 Posts
RE: Balance plug question
Your Hyp charger probably came with HYP balance board and 2-4s use the same white plastic housing. You will need to get the right board OR change your battery over to Hyp tap. It's hard to tell without seeing it or knowing the brand of battery , but my guess is that you need XH.
http://www.rcuniverse.com/forum/m_91...tm.htm#9108084
http://www.rcuniverse.com/forum/m_91...tm.htm#9108084
#4
Member
Thread Starter
My Feedback: (6)
Join Date: Jan 2005
Location: Coeur d Alene ,
ID
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
RE: Balance plug question
Yeah, I bought this Hyperion charger and it came with these boards. One is marked hyperion and has inputs for 2,3,4,5 and 5 cell
The fewest pins are 4 even on the two cell location.
Same with other board that says thunderpower, flight power on it. Still no 3 pin inputs.
My batteries I just purchased are the LiFe brand from Hobbico. They have a 3 pin balance plug thats slightly different than any of the options I have on these boards.
Guess I will try calling Hyperion service? Thanks
The fewest pins are 4 even on the two cell location.
Same with other board that says thunderpower, flight power on it. Still no 3 pin inputs.
My batteries I just purchased are the LiFe brand from Hobbico. They have a 3 pin balance plug thats slightly different than any of the options I have on these boards.
Guess I will try calling Hyperion service? Thanks
#5
Senior Member
My Feedback: (325)
Join Date: Mar 2003
Location: LaGrange, OH
Posts: 14,857
Likes: 0
Received 0 Likes
on
0 Posts
RE: Balance plug question
The TP should have 3 and 4 pin plugs , but they are different pin spacing anyways and a different latch. Your Hobbico Batts use XH style taps. They are the most popular.