RC noob with a TT-01ED
#1
Junior Member
Thread Starter
Join Date: Dec 2012
Location: Jeddah
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RC noob with a TT-01ED
Hello,
after extensive research I bought my self a TT-01ED chassis kit & got a Futaba 2PH 2 Channel Radio set AM/1 S3003 Servo
The servo didn't work cuz the inserts were worn out from the screw and i never really got the chance to even play with my car
I need your help to choose a decent servo to go with my setup that has metal gears and good durability and price
the engine is the Tamiya RS540 sport tuned and the TEU-104BK ESC
what are you recommendation guys?
thanks alo
after extensive research I bought my self a TT-01ED chassis kit & got a Futaba 2PH 2 Channel Radio set AM/1 S3003 Servo
The servo didn't work cuz the inserts were worn out from the screw and i never really got the chance to even play with my car
I need your help to choose a decent servo to go with my setup that has metal gears and good durability and price
the engine is the Tamiya RS540 sport tuned and the TEU-104BK ESC
what are you recommendation guys?
thanks alo
#2
Member
Join Date: May 2012
Location: Eugene,OR
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC noob with a TT-01ED
has good review should fit too its a standard servo with low profile
http://www.hobbyking.com/hobbyking/store/__8784__BMS_706MG_Low_Profile_High_Speed_Servo_Met al_Gear_4_6kg_13sec_32g.html
#4
Member
Join Date: May 2012
Location: Eugene,OR
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
RE: RC noob with a TT-01ED
just means its shorter then a normal servo its a standard size mount layout but shorter in overall size so itll work with anything that use a normal size servo.
or if your Local hobby shop still sells the traxxas 2055/2075 servos just pick one of those up i have the 2055 in my yokomo and it works just fine
or if your Local hobby shop still sells the traxxas 2055/2075 servos just pick one of those up i have the 2055 in my yokomo and it works just fine