carby for QD HT
12-28-2012, 08:41 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2009
Location: gympieqld, AUSTRALIA
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
carby for QD HT
is anybody running modded257 carbies on there qds. i got hold of a 2nd hand 26cc QD ht& its got a modded 929 on it, ran ok, was thinkin about tryin 257. please let me kow what u think.
oz
oz
12-28-2012, 11:05 PM
#3
Senior Member
Thread Starter
Join Date: Jul 2009
Location: gympieqld, AUSTRALIA
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
RE: carby for QD HT
Gday Ron,i tried a modded wyk 33 i picked up 2nd hand on my other other qd, it ran quiet strong but i had issues with shutting it down, so i put the modded 644 back on,
12-29-2012, 01:19 AM
#4
Senior Member
Join Date: Jan 2005
Location: blackpool, UNITED KINGDOM
Posts: 11,390
Likes: 0
Received 2 Likes
on
2 Posts
RE: carby for QD HT
929 is better carb than a 257 to me anyway cant see you seeing any improvements swapping it.
Mart
http://www.rcuniverse.com/forum/m_93...tm.htm#9362676
Mart
http://www.rcuniverse.com/forum/m_93...tm.htm#9362676
12-29-2012, 05:02 AM
#5
Senior Member
Thread Starter
Join Date: Jul 2009
Location: gympieqld, AUSTRALIA
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
RE: carby for QD HT
Gday Mart, thanks for that, if u dont mind, what r your carb settings for your 929s.i know the 257 runs basically 2 &1.
oz
oz
12-31-2012, 04:35 PM
#7
Senior Member
RE: carby for QD HT
Indulge the QD-HT with a Walbro HDA-48. [link=http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.909/.f][ L I N K ][/link]
Use a aluminium isolator and external pulse.
Use a aluminium isolator and external pulse.
