Why is it that...
#1
Junior Member
Thread Starter
Join Date: Oct 2011
Location: Enola, PA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Why is it that...
this is all messed up? My son and Icompleted assembly on our Tamiya Lunchbox the other day, using kit supplied parts, servo, ecs and an ACERC4CH 2.4GHz IFHss radio.
What do we need to switch to make the vehicle move forward when the trigger is pulled back and reverse when pushed forward?We have it wired backwards, but I am not all that good with electrics and wiring and he assembled that portion. It is a Channel 1 vs Channel 2 thing? Thanks in advance for helping total newbs.
Ican provide photos if necessary...
HAPPYNEWYEAR!
What do we need to switch to make the vehicle move forward when the trigger is pulled back and reverse when pushed forward?We have it wired backwards, but I am not all that good with electrics and wiring and he assembled that portion. It is a Channel 1 vs Channel 2 thing? Thanks in advance for helping total newbs.
Ican provide photos if necessary...
HAPPYNEWYEAR!
#3
Junior Member
Thread Starter
Join Date: Oct 2011
Location: Enola, PA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
RE: Why is it that...
We were able to get it figured out. Thanks for the reply. Now the hardest thing is getting the steering arms adjusted so it tracks straight.