Notices
RC Warbirds and Warplanes Discuss rc warbirds and warplanes in this forum.

Retract Air Pump

Old 01-08-2013, 12:46 PM
  #1  
BobH
Thread Starter
My Feedback: (2)
 
Join Date: Mar 2003
Location: Springfield, VA,
Posts: 8,049
Received 21 Likes on 21 Posts
Default Retract Air Pump

Looking for experiences with cordless Air pumps for the retracts. I have the Robart one that comes with a gauge etc. but I'm thinking of getting a bettery operated one. Some of my friends have them and they seem to work lots faster than me! lol

Opinions welcomed!!
Old 01-08-2013, 01:08 PM
  #2  
sparky4lawndart
My Feedback: (10)
 
sparky4lawndart's Avatar
 
Join Date: Jun 2002
Location: Ladera Ranch, CA
Posts: 678
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Retract Air Pump

I found a few options at HarborFreight.. the best one I have cost $8.. little yellow one.. 12v and pumps to 100PSI pretty quick... it has a cig adapter but I rigged an inline deans plug and use one of my HobbyPeople 3s 2200 20c LiPos for power. (i have a bunch for my PZ T28)

Some of the guys at my flightline have new Sears cordless LiIon ones that cost cost $50 + battery $30 +charger $20
Old 01-08-2013, 01:58 PM
  #3  
mikes68charger
My Feedback: (34)
 
Join Date: Oct 2010
Location: , OH
Posts: 1,960
Received 10 Likes on 8 Posts
Default RE: Retract Air Pump

I'm useing a $8 from Walgreens
Old 01-08-2013, 02:07 PM
  #4  
samparfitt
My Feedback: (43)
 
Join Date: Sep 2002
Location: West Chester, OH
Posts: 7,162
Likes: 0
Received 30 Likes on 28 Posts
Default RE: Retract Air Pump

Yo Bob,
Got mine at Auto Zone: 50 bucks, by slime (unusual name!).
A few of my friends have the same design but from other brand names (campbell hausfeld, etc) from home depot, etc (probably all made by the same china factory!).
Had about 2 seasons with no problems (bought an extra for backup).
Comes with plug in charger. There's side pockets to hold charger and air line.
I see amazon sells them so you can order if no local stores available.
What ever you get, make sure the air gauge goes to about 300 as they don't produce what the gauge says to you need 300 to get 100. A long time ago, I bought one that only had about 150 lb gauge and it would never get up to providing 100 lbs of pressure.
Compared to my 60 gallon, 220 volt compressor, the compressor on these portable 'jobs' aren't very good: when you take them apart, you wonder how they can even work as it looks like pot metal with very large clearance tolerances. From my experience, any electric compressor costing less than 20 bucks (or so) and it'll last about one tire 'fill up'! A long time ago, I bought one at a drug for about 15 bucks and it lasted about 15 days.
Attached Thumbnails Click image for larger version

Name:	Ay73991.jpg
Views:	65
Size:	59.2 KB
ID:	1838269  
Old 01-08-2013, 02:14 PM
  #5  
alanc
 
Join Date: Dec 2003
Location: manchester, AE, UNITED KINGDOM
Posts: 1,795
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Retract Air Pump

if you can get these over the pond, they work great for up to the big robart tank, dont get less than an 18volt one,

http://www.ebay.co.uk/itm/Silverline...item2575cc10f6
Old 01-08-2013, 02:32 PM
  #6  
JPate147
Senior Member
 
Join Date: Jul 2007
Location: Wetumpka, AL
Posts: 177
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Retract Air Pump

I agree with Sam - the Slime compressor works great. Mine is 5 years old and all I had to do was change the battery once. The guage is accurate and it pumps quickly.
Old 01-08-2013, 03:25 PM
  #7  
prop wash
 
prop wash's Avatar
 
Join Date: Jan 2003
Location: Griffith, IN
Posts: 1,052
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Retract Air Pump

I have two that I bought from K-mart about ten years ago and they work great.I also bought one from M wards [Kamble Hausfeld][sp] with a internal battery and had to replace the battery once.The cheap ones from K-mart work better.???Go fig.
Tom
Old 01-08-2013, 03:47 PM
  #8  
BobH
Thread Starter
My Feedback: (2)
 
Join Date: Mar 2003
Location: Springfield, VA,
Posts: 8,049
Received 21 Likes on 21 Posts
Default RE: Retract Air Pump

Yo Sam, thanks. Thank you all for suggestions. I went to home Depot to look for a Campbell Hausfeld model but they only had the Ryobi's in the store. After reading about them on line I didn't purchase one.
My experience is if you buy cheap you get what you pay for.. usually lol

Old 01-08-2013, 06:43 PM
  #9  
John Baligrodzki
 
Join Date: Apr 2003
Location: North St.Paul, MN
Posts: 355
Likes: 0
Received 1 Like on 1 Post
Default RE: Retract Air Pump

Bob,

Got tired of an battery operated pump. Making sure it was charged, etc. Went to the local bike shop and spent $30 on a manual bike tire pump. Has a PSI pressure gauge. Takes about 25 pumps to fill the tank to 120 PSI on my Yellow P47. About 5 pumps between flights. As long as I have had a sandwich there will be enough energy reserve to operate it! Made a simple adapter using a basketball needle valve to make it work. Very happy with this.

Regards,

John B.
Old 01-08-2013, 07:07 PM
  #10  
BobH
Thread Starter
My Feedback: (2)
 
Join Date: Mar 2003
Location: Springfield, VA,
Posts: 8,049
Received 21 Likes on 21 Posts
Default RE: Retract Air Pump

John, thank you. I've seen those and have given them some thought. Im still undecided lol
Old 01-08-2013, 08:05 PM
  #11  
kram
My Feedback: (7)
 
kram's Avatar
 
Join Date: Jul 2002
Location: ames, IA
Posts: 1,603
Likes: 0
Received 4 Likes on 3 Posts
Default RE: Retract Air Pump

An RC friend from Grand Island had a great one last summer: I had to get one for myself.

It's the Bonair i5000, made by Goodyear, available at Amazon and many other sites on-line

Make sure you get the i5000. It's the one perfectly suited for field use

Old 01-09-2013, 05:58 AM
  #12  
astrohog
My Feedback: (1)
 
astrohog's Avatar
 
Join Date: Dec 2001
Location: Bellingham, WA
Posts: 3,345
Likes: 0
Received 3 Likes on 2 Posts
Default RE: Retract Air Pump

This is the one I just bought.

http://www.sears.com/craftsman-c3-19...p-00911586000P

A buddy of mine has one from Harbor Freight (I think) that has worked fine for a couple of years. The Craftsman unit I just bought uses the same batteries that I will keep in the trailer for the cordless drill/driver, so no extra support equipment to haul to the field, and this little inflator feels very robust!

Regards,

astrohog
Old 01-09-2013, 06:09 AM
  #13  
BobH
Thread Starter
My Feedback: (2)
 
Join Date: Mar 2003
Location: Springfield, VA,
Posts: 8,049
Received 21 Likes on 21 Posts
Default RE: Retract Air Pump

Thank you all for the suggestions. I was given some gift cards for Home Depot for Christmas. So I think I'm going to buy what ever Home Depot has on line for sale. Probably the CC2300 Campbell Hausfeld. Seems as thought the battery dies in all these units at one time or another. Perhaps when that happens I can usa a different type battery.
Old 01-09-2013, 07:24 AM
  #14  
samparfitt
My Feedback: (43)
 
Join Date: Sep 2002
Location: West Chester, OH
Posts: 7,162
Likes: 0
Received 30 Likes on 28 Posts
Default RE: Retract Air Pump

Yo Bob,
I think the batteries are acid core (at least my model is acid core) so it's usually best to just leave them on charge and I think they will last longer than if they are allowed to drain. Most of the multi-day flyins seem to have 110 in the pits so I just leave them on charge when not in use.
ps: I think campbell hausfeld got bought out by another company so it's under a new name.
Old 01-09-2013, 07:47 AM
  #15  
BobH
Thread Starter
My Feedback: (2)
 
Join Date: Mar 2003
Location: Springfield, VA,
Posts: 8,049
Received 21 Likes on 21 Posts
Default RE: Retract Air Pump

Sam, thanks buddy. I'll keep that in mind
Old 01-09-2013, 08:29 AM
  #16  
Zeeb
My Feedback: (41)
 
Zeeb's Avatar
 
Join Date: Nov 2004
Location: St George, Utah UT
Posts: 5,685
Received 67 Likes on 54 Posts
Default RE: Retract Air Pump

I agonized over this same question, asked for preferences here and then went looking at all the options.

IMHO the Sears unit is the way to go. It's about the size of a cordless drill which is a real plus, doesn't need a separate battery and will fill the dual 350cc air tanks on my 1/5 scale Mustang in short order. Downside is the price quoted on the link above is for the compressor only, no battery or charger is included. If you don't already have that stuff, adding the battery/s and charger will add to the price tag substantially.

http://www.sears.com/craftsman-c3-19...=4003003&aff=Y
Old 01-09-2013, 11:48 AM
  #17  
Me410
Senior Member
 
Join Date: Feb 2011
Location: Comox, BC, CANADA
Posts: 162
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Retract Air Pump

I think this is a case where you can go cheap and get away with it.

I use a 9$ 12 volt tiny compressor from Canadian Tire, I run it off my 12 volt field box battery. ( now I use a 3 cell LiPo in my field box, it'slighter than the old wet cell, and cheaper!

It pumps up my systems quick and has last for 10 years now!! When it dies, I just get another.

Just cut the air hose off at the end, then use Goop glue and slide in your rc air line to the length you want and attach the correct end.
Presto

Old 01-09-2013, 04:47 PM
  #18  
lrb75
My Feedback: (12)
 
Join Date: Jul 2002
Location: Alexandria, VA
Posts: 706
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Retract Air Pump

Bob, the slime pump pictured is exactly the same as the C-H 2300 pump I have. HD has them online for $50.
Old 01-09-2013, 05:10 PM
  #19  
BobH
Thread Starter
My Feedback: (2)
 
Join Date: Mar 2003
Location: Springfield, VA,
Posts: 8,049
Received 21 Likes on 21 Posts
Default RE: Retract Air Pump

Ross, thank you. Mine CC2300 is on the way from HD. You are right.. probably made by the same company in.. china?? lol!
Old 01-09-2013, 06:13 PM
  #20  
tevans55
 
Join Date: Aug 2007
Location: Louisville, KY
Posts: 1,337
Received 6 Likes on 6 Posts
Default RE: Retract Air Pump

I think you will be happy with the Campbell Hausfeld. I've been using this one for 6 years. I charge it once a year for 24 hours and it's still going strong!
Old 01-09-2013, 08:30 PM
  #21  
BobH
Thread Starter
My Feedback: (2)
 
Join Date: Mar 2003
Location: Springfield, VA,
Posts: 8,049
Received 21 Likes on 21 Posts
Default RE: Retract Air Pump

Wow.. great!
Old 01-10-2013, 05:48 PM
  #22  
astrohog
My Feedback: (1)
 
astrohog's Avatar
 
Join Date: Dec 2001
Location: Bellingham, WA
Posts: 3,345
Likes: 0
Received 3 Likes on 2 Posts
Default RE: Retract Air Pump


ORIGINAL: Zeeb

I agonized over this same question, asked for preferences here and then went looking at all the options.

IMHO the Sears unit is the way to go. It's about the size of a cordless drill which is a real plus, doesn't need a separate battery and will fill the dual 350cc air tanks on my 1/5 scale Mustang in short order. Downside is the price quoted on the link above is for the compressor only, no battery or charger is included. If you don't already have that stuff, adding the battery/s and charger will add to the price tag substantially.

http://www.sears.com/craftsman-c3-19...=4003003&aff=Y

Yeah, it is definately not the cheapest option, and I haven't really had a chance to use it over time yet, so I can't speak to its longevity, but I think it does fit the bill best for me! I went ahead and bought a drill/driver, 2 batteries and the charger (all my cordless stuff at home is either DeWalt or Makita), and it will always just stay in my trailer, vs. grabbing my cordless from home every time I am heading to the field.

Regards,

Astrohog
Old 01-22-2013, 12:31 AM
  #23  
dadragon
Senior Member
 
Join Date: Dec 2008
Location: pine bluffs, WY
Posts: 485
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Retract Air Pump

the harbor freight is the one I used before I went hydraulics.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.