Ezrun 35a esc help
#1
Junior Member
Thread Starter
Join Date: Jul 2012
Location: robertsdaleAL
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Ezrun 35a esc help
I ordered a ezrun combo 35a esc and 4300kv motor istalled everything calibrated the esc and when the esc finishes the last step it goes wide open I am new to brushless was hoping someone can tell me if I'm do something wrong or ordered a piece of junk
#2
RE: Ezrun 35a esc help
probably doing it in the wrong order
http://www.hobbywing.com/video_play.asp?id=5
I own 8 or 9 of their ESC's and the only time they will do that is if I mix up one of the steps
Also make sure your radio trims are centered, and try reversing the radio if you follow that video exactly as some require you to reverse the throttle channel to work right.
http://www.hobbywing.com/video_play.asp?id=5
I own 8 or 9 of their ESC's and the only time they will do that is if I mix up one of the steps
Also make sure your radio trims are centered, and try reversing the radio if you follow that video exactly as some require you to reverse the throttle channel to work right.
#4
Junior Member
Thread Starter
Join Date: Jul 2012
Location: robertsdaleAL
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ezrun 35a esc help
thanks for the help it was me i pluged the esc in the wrong slot on the reciever its dark so we really cant run it but man it seems fast me and my 14 year old son are slowly learning the hobby
#5
Junior Member
Thread Starter
Join Date: Jul 2012
Location: robertsdaleAL
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ezrun 35a esc help
and we put it on a stamped he got for xmas the titan lasted 2 days its brushless ready so i said the heck with brushed i have a 3906 emaxx i want a brushless one but mine isnt worth converting i dont geuss
#6
RE: Ezrun 35a esc help
its awsome that we now have these "low cost" brushless systems. Most of the redcat models have a simillar ezrun system so Ive had several of them. Only had 1 esc ever fail on me.
Ive run 3s on them as well without any issue.
Ive run 3s on them as well without any issue.
#8
RE: Ezrun 35a esc help
ORIGINAL: chance76
and we put it on a stamped he got for xmas the titan lasted 2 days its brushless ready so i said the heck with brushed i have a 3906 emaxx i want a brushless one but mine isnt worth converting i dont geuss
and we put it on a stamped he got for xmas the titan lasted 2 days its brushless ready so i said the heck with brushed i have a 3906 emaxx i want a brushless one but mine isnt worth converting i dont geuss
I remember my titan motor lasted 3 runs at most before it burnt(and that was after I did the water break in process [:@])
#10
RE: Ezrun 35a esc help
ORIGINAL: chance76
I ordered a ezrun combo 35a esc and 4300kv motor istalled everything calibrated the esc and when the esc finishes the last step it goes wide open I am new to brushless was hoping someone can tell me if I'm do something wrong or ordered a piece of junk
I ordered a ezrun combo 35a esc and 4300kv motor istalled everything calibrated the esc and when the esc finishes the last step it goes wide open I am new to brushless was hoping someone can tell me if I'm do something wrong or ordered a piece of junk
#12
Junior Member
Thread Starter
Join Date: Jul 2012
Location: robertsdaleAL
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ezrun 35a esc help
Hope the weather holds so he can unleash it whe he gets out of school
Now I got to decide what my next rc is going to be something that can handle semi rough terrain but really haul but
#14
Junior Member
Thread Starter
Join Date: Jul 2012
Location: robertsdaleAL
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ezrun 35a esc help
I don't think a buggy would fit my needs I like the truggys just don't know which one they all seem to have there ups and downs