combo for racer
#1
Member
Thread Starter
Join Date: Feb 2012
Location: flushing,
MI
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
combo for racer
i have a b4.1 and want to upgrade from the rtr motor and esc.... what is a good combo to go with, i like castle and stray away from novack> thanks everyone
#2
Senior Member
Join Date: Aug 2010
Location: Akron, OH
Posts: 2,604
Likes: 0
Received 0 Likes
on
0 Posts
RE: combo for racer
For that little buggy you might actually like the Novak setup, sensored, of course. I have a buddy who runs it in his and swears by it, best setup he's ever used. I have no personal experience on it, but I would take the advice of a life-long racer and consistent A-main top finisher any day
#4
RE: combo for racer
I never understand why people ask for equipment advice, and then immediately follow it up by blowing off good quality equipment while going for lower common denominator stuff.
#5
Member
Thread Starter
Join Date: Feb 2012
Location: flushing,
MI
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
RE: combo for racer
i was told at the hobby shop that a few years ago novack was at the top of there game but the past few years novack has been catching fire according to the guys at the shop
#7
Senior Member
Join Date: Aug 2010
Location: Akron, OH
Posts: 2,604
Likes: 0
Received 0 Likes
on
0 Posts
RE: combo for racer
Personally, I've only seen one Novak go up in smoke, and that's because the tool plugged his bullet battery connectors in backwards.
As for sensored vs sensorless: Sensorless, I found, is best in applications that require little finesse and caution, as it is more like having a light switch, or a 3-speed control.
Sensored allows for smoother power delivery and is, IMO, better suited to smaller, more finicky classes, like the 1/10 2wd buggies
As for sensored vs sensorless: Sensorless, I found, is best in applications that require little finesse and caution, as it is more like having a light switch, or a 3-speed control.
Sensored allows for smoother power delivery and is, IMO, better suited to smaller, more finicky classes, like the 1/10 2wd buggies
#9
Junior Member
Join Date: Jan 2013
Location: turtletown,
TN
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
RE: combo for racer
Great my son is wanting brushless on his torment what addvice would u give me on combo,servo,shocks,gear set up.i mean the whole enchilada price in the medium range. All suggestions greatly considered
#10
Senior Member
Join Date: Aug 2010
Location: Akron, OH
Posts: 2,604
Likes: 0
Received 0 Likes
on
0 Posts
RE: combo for racer
I'd give some serious thought to a Novak Ballistic 10.5 for a good rounded motor in that buggy, or check into Tekin, they are also tops in that category, IMO.
I'd keep it around 10.5, btw, you can go as low as 8.5 but too much torque in that application is really just overkill. You could go as high as a 17.5 turn and test your consistency on the track, too hehe
Seriously though, keep it near the 10's
I'd keep it around 10.5, btw, you can go as low as 8.5 but too much torque in that application is really just overkill. You could go as high as a 17.5 turn and test your consistency on the track, too hehe
Seriously though, keep it near the 10's
ORIGINAL: JTANK78
ok lets throw novack in the mix what do you like for 10th scale buggy
ok lets throw novack in the mix what do you like for 10th scale buggy
#11
Senior Member
Join Date: Aug 2010
Location: Akron, OH
Posts: 2,604
Likes: 0
Received 0 Likes
on
0 Posts
RE: combo for racer
In all honesty, I wouldn't. Let him run and even race it until he gets totally proficient with what he has, and move on. The Torment is a great starter RC, but to change pretty much every major component for something that is still just a great starter truck will leave you with a heavily modded starter truck. I've learned this lesson myself in the past, albeit with a different ride. I'd hold out and wait until he is ready to move on to a higher quality kit all together, but that's just me.
ORIGINAL: mattycole
Great my son is wanting brushless on his torment what addvice would u give me on combo,servo,shocks,gear set up.i mean the whole enchilada price in the medium range. All suggestions greatly considered
Great my son is wanting brushless on his torment what addvice would u give me on combo,servo,shocks,gear set up.i mean the whole enchilada price in the medium range. All suggestions greatly considered
#12
Junior Member
Join Date: Jan 2013
Location: turtletown,
TN
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
RE: combo for racer
He is proficient already .i have several good r/cs myself with lots of parts and new upgrades in the box i have been trying to trade for him a better quality truck but no one wants to help a brother out anymore.u know get him ssomething used but good quality with room for upgrade. Any suggestions
#13
Senior Member
Join Date: Aug 2010
Location: Akron, OH
Posts: 2,604
Likes: 0
Received 0 Likes
on
0 Posts
RE: combo for racer
Well, if he likes 2wd Corr trucks, you can't beat the Associated SC10 for your money!
ORIGINAL: mattycole
He is proficient already .i have several good r/cs myself with lots of parts and new upgrades in the box i have been trying to trade for him a better quality truck but no one wants to help a brother out anymore.u know get him ssomething used but good quality with room for upgrade. Any suggestions
He is proficient already .i have several good r/cs myself with lots of parts and new upgrades in the box i have been trying to trade for him a better quality truck but no one wants to help a brother out anymore.u know get him ssomething used but good quality with room for upgrade. Any suggestions
#14
RE: combo for racer
ORIGINAL: FahrtAutoRC
Personally, I've only seen one Novak go up in smoke, and that's because the tool plugged his bullet battery connectors in backwards.
As for sensored vs sensorless: Sensorless, I found, is best in applications that require little finesse and caution, as it is more like having a light switch, or a 3-speed control.
Sensored allows for smoother power delivery and is, IMO, better suited to smaller, more finicky classes, like the 1/10 2wd buggies
Personally, I've only seen one Novak go up in smoke, and that's because the tool plugged his bullet battery connectors in backwards.
As for sensored vs sensorless: Sensorless, I found, is best in applications that require little finesse and caution, as it is more like having a light switch, or a 3-speed control.
Sensored allows for smoother power delivery and is, IMO, better suited to smaller, more finicky classes, like the 1/10 2wd buggies
Exactly - electronics manufacturers get bad reputations just because few inexperienced don't know what they're doing, when in reality Novak has one of the best warranty/exchange programs in the industry. Meanwhile companies like castle build a rep by selling cheaply, yet even their prices have grown to the point they're about as much as the better brands, and people overlook the fact that if something does go wrong they've got one of the worst warranty programs in part because their in-house inventory is so small.
End of the day, I've seen literally every brand go up in smoke at one time or another - but in the overwhelming majority of cases the problem resulted because of user error.
#15
RE: combo for racer
ORIGINAL: mattycole
Great my son is wanting brushless on his torment what addvice would u give me on combo,servo,shocks,gear set up.i mean the whole enchilada price in the medium range. All suggestions greatly considered
Great my son is wanting brushless on his torment what addvice would u give me on combo,servo,shocks,gear set up.i mean the whole enchilada price in the medium range. All suggestions greatly considered
In all honesty, I wouldn't. Let him run and even race it until he gets totally proficient with what he has, and move on. The Torment is a great starter RC, but to change pretty much every major component for something that is still just a great starter truck will leave you with a heavily modded starter truck. I've learned this lesson myself in the past, albeit with a different ride. I'd hold out and wait until he is ready to move on to a higher quality kit all together, but that's just me.
ORIGINAL: mattycole
He is proficient already .i have several good r/cs myself with lots of parts and new upgrades in the box i have been trying to trade for him a better quality truck but no one wants to help a brother out anymore.u know get him ssomething used but good quality with room for upgrade. Any suggestions
He is proficient already .i have several good r/cs myself with lots of parts and new upgrades in the box i have been trying to trade for him a better quality truck but no one wants to help a brother out anymore.u know get him ssomething used but good quality with room for upgrade. Any suggestions
#16
My Feedback: (3)
RE: combo for racer
From Castle about the only thing Irecommend for the B4.1 is the Sidewinder SCT or the SV2 with the 3800kv motor. It will have more torque than the Reedy system, spins a little faster than the stock system and you gain the abillity to hook up to your PC with Castle Link. But, motors much faster than that don't do much good in these little cars because they're so light on their feet. If you are a precision driver and have good throttle modulation then you might enjoy a 4000+kv motor. Even then you're at the point of over-powering the car.
I run a 2950kv (approx 13.5 turn) 2-pole motor in my B4 and it's probably at the fastest end of the spectrum for racing. My car is noticeably faster than any other 2WD on the track. The problem is that Ihave difficulty reigning in the power. A system like this Novak here is good because even though it's a slower turning motor, it produces the right amount of power, it's sensored so it's smooth and you can have room to gear taller to increase your speed.
If you're not racing then go for broke and drop a 5000KV motor in it, find a smooth stretch of road, hit 88mph and see what happens.
I run a 2950kv (approx 13.5 turn) 2-pole motor in my B4 and it's probably at the fastest end of the spectrum for racing. My car is noticeably faster than any other 2WD on the track. The problem is that Ihave difficulty reigning in the power. A system like this Novak here is good because even though it's a slower turning motor, it produces the right amount of power, it's sensored so it's smooth and you can have room to gear taller to increase your speed.
If you're not racing then go for broke and drop a 5000KV motor in it, find a smooth stretch of road, hit 88mph and see what happens.
#17
Senior Member
Join Date: Aug 2010
Location: Akron, OH
Posts: 2,604
Likes: 0
Received 0 Likes
on
0 Posts
RE: combo for racer
ORIGINAL: BKoz559
If you're not racing then go for broke and drop a 5000KV motor in it, find a smooth stretch of road, hit 88mph and see what happens.
If you're not racing then go for broke and drop a 5000KV motor in it, find a smooth stretch of road, hit 88mph and see what happens.
#18
Senior Member
RE: combo for racer
ORIGINAL: FahrtAutoRC
In all honesty, I wouldn't. Let him run and even race it until he gets totally proficient with what he has, and move on. The Torment is a great starter RC, but to change pretty much every major component for something that is still just a great starter truck will leave you with a heavily modded starter truck. I've learned this lesson myself in the past, albeit with a different ride. I'd hold out and wait until he is ready to move on to a higher quality kit all together, but that's just me.
In all honesty, I wouldn't. Let him run and even race it until he gets totally proficient with what he has, and move on. The Torment is a great starter RC, but to change pretty much every major component for something that is still just a great starter truck will leave you with a heavily modded starter truck. I've learned this lesson myself in the past, albeit with a different ride. I'd hold out and wait until he is ready to move on to a higher quality kit all together, but that's just me.