aeromarine begginer :)
01-27-2013, 01:35 AM
#1
Junior Member
Thread Starter
Join Date: Jan 2013
Location: North Wales, UNITED KINGDOM
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
aeromarine begginer :)
iv read the prop shaft needs greasing often, whats the best way to do this??? iv seen the small hole near the prop does the grease get injected in through here and how???? help ! haha
01-31-2013, 06:16 PM
#2
Senior Member
Join Date: Aug 2006
Location: Oromocto,
NB, CANADA
Posts: 2,882
Likes: 0
Received 0 Likes
on
0 Posts
RE: aeromarine begginer :)
loosen the collet at the engine and pull the flex shaft out, clean with a rag, grease (leave at least 1 inch free of grease, where it slides back in the collet) reinstall, tighten the collet and go.
I do it once to twice a day while at the pond and one last time at the end of the day before putting the boat away.
Dan.
I do it once to twice a day while at the pond and one last time at the end of the day before putting the boat away.
Dan.
