RTCharlie

I'll have to have the parts department check if they have another elevator that they can send you, if the one that you received is warped the chances are that the others are too. I'll also inform the factory to about the issue. Are you able to use a little bit of heat to get the piece straight again?  

slamn sammy

Charlie, it's the first of the year, don't forget my 100cc su-26 Fus, LOL. HAPPY NEW YEAR!! ;-}``````*

tribike65

I was able to straighten the elevator out somewhat by heating and bending. Still not good, pretty severely warped to start with. If you have a straight one to send me, I would appreciate it. The rudder did straighten out with heat so we are good there. Thanks again, I do appreciate your help.
George

RTCharlie

Ok let me go and check and look through all the elevators and see if I can find one that isn't warped.

Update: So I went and got another elevator to send out. This elevator is pretty much one of the best out of the bunch. It looks like the tips has a very slight upward bend. I showed it to our piliot Antonio and he said it's as straight as it can be, since it's made of foam it can't always be perfect but it won't affect the flight of the plane.

-Charlie

tribike65

Elevator received...this one should work! I really appreciate all your help with this! I should have a flyable airplane at this point.

CK1

My Feedback: (60)

Charlie ,

I have begun to assemble my CMP 50cc Zero ( NitroPlanes OrderID: 1888572)
The canopy is total crap, creased and cracked . I need a replacement canopy please !!!

Thanks ,
Chris

tribike65

Not necessarily! Good luck!
George

slamn sammy

Charile. seen any CMP SU-26 100cc parts yet? Still need a fuse.

RTCharlie

I made the request to have another cowl sent out to you. When the package leaves the warehouse we'll send you a email wtith the tracking number.

-Charlie

RTCharlie

I already asked the warehouse to let me know when we get the plane and parts in so I'll let you know as soon as I get the update.

-Charlie

slamn sammy

OK, Charlie, Thank You. :~]

slamn sammy

RTCharlie, This is Slamn Sammy! I need a canopy for a 71" CMP Chipmunk, also could us a cowl, BUT! At best I can repair the cowl. I had a Inverted Hick-Up! BUT! I do need a canopy. I usted to find them on the (parts listing) on the Nitro Web site, Not there any more?? Can you run one down for me. If you can find one,and ck, on a clow to. and we will see! I will buy it. Just till me how to get it. I'm Having a time singing in at Nitro?? Can not figer out what's up with that? Thank You ':~/ Sambo[] P.S. i found the canopy on the Nitro sight, Finley and there out of stock and I did not see a place for them to e-mail me when it come's in. Can you head this off for me I need the canopy at least! Thanks.

RTCharlie

I'm not sure if CMP is producing the Chipmunk this year. I'm still waiting on CMP to update their catalog for 2013. The canopy use to be listed on the website for $8.00 on our website.

http://www.nitroplanes.com/cmpchipmunk120-canopy.html

-Charlie

slamn sammy

Charlie. Do you know any thing about the Fuselage, on the CMP 100cc Su26 yet? I have already looked on the Nitro site and the Cowl and the Canopy for the 71" 90-120 Chipmunk. Is out of stock! And It don't have a place for them to E-Mail me, When an Backorder part come's in. That would be a good tool for them to have! I guess, thats what this site is all about. I wonder If some one out there has some parts for the CMP 71" chipmunk? I need a canopy, Cowl and I could use a Fuselage and Cowl for the 100cc CMP Su26?? Please some contact me here! if they can help me out! Thank's Charlie. I know your doing what you can do and I Appreciate it. Hang in there. :~/

slamn sammy

Any one know, what kind of corving the CMP airplane's?

daytonarc

My Feedback: (5)

I need the main gear set part # 60P-ERZ-018 for a Dynam E-razor 450 Heli purchased from Nitroplanes.  It shows as out of stock.  Could you see if you can find one for me and if not could you tell me when it will be available.  Thank you

Scott

RTCharlie

We have a shipment of E-Razor parts coming in very soon. We received the first shipment from Dynam a couple weeks ago and the next shipment should be coming in soon.

CK1

My Feedback: (60)

Hi Charley,
UPS just dropped off my canopy and it is cracked too . I cant get pic to load ,getting internal server error.
ref ID 1888572. Please send me an unbroken one
Thanks ,
Chris

RTCharlie

PM replied.

-Charlie

cjtyped

My Feedback: (1)

Hello,
I love Notroplanes! Is there an extra Bobcat canopy laying around I can buy?
Thank You.
Randy

RTCharlie

What size Bobcat are you referring to? The 25 or the 50 size?

-Charlie

cjtyped

My Feedback: (1)

I am hoping for a 50 sized Bobcat canopy. Thank You.

slamn sammy

Charlie, I'm Tired of waitting! i't has been almoust been five year's now and Nitro had got to me for around $500+ of -. I'm Going to trun this over to the BBB and the comsumer patcaktion agentse and see if they can get something dun! If Nitro modles is going to sale stuff, They should stand behind there product! I have been watching the 100cc su 26 and found that ,they had to up grad the plane. the landen gear has been redun, the tail of the plane has been comming off and they redid it and that is why my plane crashed! No One call or E-Mailed Me for a recall, I payed for a new fuse, when it showed it in stock and after that it wen't out of stock! and the price wen't up. The plane Keeps going In and out of stock. I'm at a Club meeting and there looking over my sholder and a lot of them are buyers of Nitro Model's and MAY not get a sale from them ageen! Please do something about this. I have a $500.00 Peace of s***! If Nitro will not send me a new Fuse, Then replace it with the Extra 100cc Plane. It's Cheeper! and I will Box This up and you can have it back. i will cover all the shipping! I'm just not going to set on this NO MORE! It's been to long. P.S. I still need a canopy for my 120 Chipmunck, Is that going to be a nuther 5 years To?

RTCharlie

I asked the parts department and they don't have the canopy at the moment. They said that they might have the canopy for the 25 size at the moment.

-Charlie

RTCharlie

We don't make the plane in house, nor do we own the factory that make the the90A215100cc su 26. We have to wait for the items to get produced overseas and then have them sent over to us. I understand that it's taking a long time to get the parts for the plane but theres nothing on our part that can be done to speed up the production time.

-Charlie