1/2A and Motorcycling
#53
RE: 1/2A and Motorcycling
George, for the record my Boss Hoss was an early one before they went to automatic. Corvette clutch, foot clutch to opperate it before you started, then hand clutch once you were going. They used a small brake booster for clutch assist, but the hand clutch was still a bear.
As to "push it in", haven't had to push or trailer one of mine in the last 500,000 miles. The motor was still running fine in this one at 122,000 when I pulled it, but I did the motor on my FZR TWICE in the first 17k, then sold it to someone who wanted to ride fast for 20 minutes at a time.
Tee Bee, that's why I like that big old S&S Super E, you can clean the jets with a toilet brush if say a mouse starts building a nest in one
I'm with Vic on this one, Honda matics are fine on the old za50 for teaching a 5 year old, after that, it's time for the big boy/girl pants. The point of having that big V-Twin is that you never have to downshift anyway except to stop, or a realy big hill when you are towing your boat
As to "push it in", haven't had to push or trailer one of mine in the last 500,000 miles. The motor was still running fine in this one at 122,000 when I pulled it, but I did the motor on my FZR TWICE in the first 17k, then sold it to someone who wanted to ride fast for 20 minutes at a time.
Tee Bee, that's why I like that big old S&S Super E, you can clean the jets with a toilet brush if say a mouse starts building a nest in one
I'm with Vic on this one, Honda matics are fine on the old za50 for teaching a 5 year old, after that, it's time for the big boy/girl pants. The point of having that big V-Twin is that you never have to downshift anyway except to stop, or a realy big hill when you are towing your boat
#54
Junior Member
My Feedback: (1)
Join Date: Mar 2008
Location: Andover, MN
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
RE: 1/2A and Motorcycling
I got my CB750A cheap and in good condition for $750. Otherwise I wouldn't have one. LOL It's a good commuter bike, especially during stop and go traffic. No sore left hand! But the brakes are not so great and the seat is not comfy. Motor is smoooth! SOHC simplicity and dependability. It is what it is for being a 2 speed semi-automatic from 1977. Yes you still have to manually shift from low to high and back to low if you want but you can just leave it in high and still take off fine with the rest of the traffic and I'm 6'4", 250#. I would not own it if I had money for a real bike but you get attached because it's odd and don't admit to owning one, at least not face to face. Sorta like admitting you use a Babe Bee while everyone else has them new fangled brushless electric motors. ROFLMAO!!! Know-what-I-mean, Vern? You guys are great!
#55
Senior Member
My Feedback: (2)
RE: 1/2A and Motorcycling
ORIGINAL: pspring
I got my CB750A cheap and in good condition for $750. Otherwise I wouldn't have one. LOL It's a good commuter bike, especially during stop and go traffic. No sore left hand! But the brakes are not so great and the seat is not comfy. Motor is smoooth! SOHC simplicity and dependability. It is what it is for being a 2 speed semi-automatic from 1977. Yes you still have to manually shift from low to high and back to low if you want but you can just leave it in high and still take off fine with the rest of the traffic and I'm 6'4'', 250#. I would not own it if I had money for a real bike but you get attached because it's odd and don't admit to owning one, at least not face to face. Sorta like admitting you use a Babe Bee while everyone else has them new fangled brushless electric motors. ROFLMAO!!! Know-what-I-mean, Vern? You guys are great!
I got my CB750A cheap and in good condition for $750. Otherwise I wouldn't have one. LOL It's a good commuter bike, especially during stop and go traffic. No sore left hand! But the brakes are not so great and the seat is not comfy. Motor is smoooth! SOHC simplicity and dependability. It is what it is for being a 2 speed semi-automatic from 1977. Yes you still have to manually shift from low to high and back to low if you want but you can just leave it in high and still take off fine with the rest of the traffic and I'm 6'4'', 250#. I would not own it if I had money for a real bike but you get attached because it's odd and don't admit to owning one, at least not face to face. Sorta like admitting you use a Babe Bee while everyone else has them new fangled brushless electric motors. ROFLMAO!!! Know-what-I-mean, Vern? You guys are great!
#56
My Feedback: (27)
RE: 1/2A and Motorcycling
I have not seen one BMW in here so I thought I would put my '84 R100RS. Ialso put in my Honda ATC110. I've also got an "81 Suzuki 450 that came with a little cafe faring and bar end mirrors. The little ATC110 is great for getting my plane when Iland too far away.
Pete
Pete
#57
RE: 1/2A and Motorcycling
Speaking of BMW, Tee Bee, what is your Adventure Touring bike? I've also riden a lot of dirt over the years, but never done the whole Adventure Tour, unless you count my old Honda 250XL or the few times I sneaked my Harly through the gates and ran down the appalachan trail a bit (not recomending it by the way). Always kind of sparked my interest a bit after watching "Long Way Round" and "Long Way Down."
#58
Junior Member
My Feedback: (1)
Join Date: Mar 2008
Location: Andover, MN
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
RE: 1/2A and Motorcycling
ORIGINAL: joebahl
Hooooold on i was just having a little fun with ya. I chopped a 72 honda 750 , Amen soft tail frame and a 10 over stock front end/ 836 kitin the motor. Same deal when i was younger bought it for barely nothing in boxes and put it together over one winter. It was a good running bike and i put alot of miles on it and never had a problem. I was riding it to the dirt bike races in peoria and the harley rear rim i had spoked to a honda hub started to shed spokes but that was the only time it let me down. Probly from to many bunouts .lol joe
Hooooold on i was just having a little fun with ya. I chopped a 72 honda 750 , Amen soft tail frame and a 10 over stock front end/ 836 kitin the motor. Same deal when i was younger bought it for barely nothing in boxes and put it together over one winter. It was a good running bike and i put alot of miles on it and never had a problem. I was riding it to the dirt bike races in peoria and the harley rear rim i had spoked to a honda hub started to shed spokes but that was the only time it let me down. Probly from to many bunouts .lol joe
#59
My Feedback: (1)
Join Date: May 2003
Location: Orangeville, ON, CANADA
Posts: 8,658
Likes: 0
Received 2 Likes
on
2 Posts
RE: 1/2A and Motorcycling
ORIGINAL: DeviousDave
Have you seen the TwoStrokeShop engine packages? They seem like they are really putting the effort into their setup..... If money were no object I'd be looking at one of their race bikes-basically they take an Aprilia RS250 and put in their 500CC RZ based engine in it. Makes about 110hp with a killer midrange hit. The bike just rapes a 600 4 cylinder in a straight line.
The only thing that is truer to my fantasy bike is a spondon framed RG500 with Lance Gamma doing the (mild) tuning and one of the upgraded transmissions thrown in.
ORIGINAL: MJD
1985 Yammie RZ350R with Toomey exhaust, about 5000mi on the clock. On the road so no pics today. I've been Jonesing for a Trinity 485cc top end/crank kit for a while..
1985 Yammie RZ350R with Toomey exhaust, about 5000mi on the clock. On the road so no pics today. I've been Jonesing for a Trinity 485cc top end/crank kit for a while..
Have you seen the TwoStrokeShop engine packages? They seem like they are really putting the effort into their setup..... If money were no object I'd be looking at one of their race bikes-basically they take an Aprilia RS250 and put in their 500CC RZ based engine in it. Makes about 110hp with a killer midrange hit. The bike just rapes a 600 4 cylinder in a straight line.
The only thing that is truer to my fantasy bike is a spondon framed RG500 with Lance Gamma doing the (mild) tuning and one of the upgraded transmissions thrown in.
The 485cc kit fits in stock cases and will work with the Toomey pipes so seems the way to go. We'll see how business goes this year..
#60
Senior Member
My Feedback: (1)
RE: 1/2A and Motorcycling
ORIGINAL: vicman
I think I need to puke.[&:]
The only way one of those would leave me is...I don't know how that could possibly happen. Mercy on your soul man!
Personally I think a Hondamatic is right behind flying lekkies and dressing in women's clothing and wearing make-up.
Might try it once but never would I tell another soul about the experience![X(]
Vicman, I recently sold my beloved ZRX to make room for my new adventure bike.
The only way one of those would leave me is...I don't know how that could possibly happen. Mercy on your soul man!
Personally I think a Hondamatic is right behind flying lekkies and dressing in women's clothing and wearing make-up.
Might try it once but never would I tell another soul about the experience![X(]
oops thats the front wheel of the magna by my miata hardtop
#61
Thread Starter
RE: 1/2A and Motorcycling
Hllywdb, I fully agree with the S&S Super E comment. I've had them on 3 of the 4 Harleys I've owned. They seem to work just fine with the 10% methanol fuel that's sold everywhere around here. My Kawi had 4 small Keihin vacuum slide carbs that hated the stuff regardless of the various additives I tried. It was a real hassle pulling those and reinstalling. On the rare occasion that I need to work on an S&S carb, it's an easy and quick operation.
I've never been stranded by mechanical problems on a Harley. Found them easier to service overall. Been stranded by Honda once, Triumph once, Suzuki at least once, and Kawi 3 times that I can remember. Still loved riding them all.
Yes, I also found the Long Way Down/Round series a bit inspirational. My adventure bike is a Suzuki DL650 V-Strom ABS Adventure. Fully loaded with all the farkles I wanted for my trip, it was about half the price of a similarly-equipped new BMW. It has a reliable rep and a good dealer network along my intended route. It's not an exciting machine to ride, but has a very smooth V-twin and carries a nice payload. Perfect for a long trip that includes some rough sections.
I've never been stranded by mechanical problems on a Harley. Found them easier to service overall. Been stranded by Honda once, Triumph once, Suzuki at least once, and Kawi 3 times that I can remember. Still loved riding them all.
Yes, I also found the Long Way Down/Round series a bit inspirational. My adventure bike is a Suzuki DL650 V-Strom ABS Adventure. Fully loaded with all the farkles I wanted for my trip, it was about half the price of a similarly-equipped new BMW. It has a reliable rep and a good dealer network along my intended route. It's not an exciting machine to ride, but has a very smooth V-twin and carries a nice payload. Perfect for a long trip that includes some rough sections.
#64
RE: 1/2A and Motorcycling
You know Tee Bee, it's been proven over and over that you can get 99% of the trips possible done on a $2000 used KLR. They could have done "The Long Way Down" on an old Honda 305 scrambler. The BMW is too heavy for my taste, now the KTM is the one that gets my attention. Granted it's more money than a KLR but it will get you there when everything else won't. I've thought about the South America run, but my wife, who has riden with me everywhere starting from riding to high school with me, doesn't ride her own.
#66
RE: 1/2A and Motorcycling
ORIGINAL: hllywdb They could have done ''The Long Way Down'' on an old Honda 305 scrambler. The BMW is too heavy for my taste, now the KTM is the one that gets my attention. Granted it's more money than a KLR but it will get you there when everything else won't.
[youtube]http://www.youtube.com/watch?v=WFTZmECTVbs[/youtube]
#67
My Feedback: (3)
RE: 1/2A and Motorcycling
Since this forum is dedicated to smaller vehicles I thought that I would show off my small scale bike and the trailer that I made for it . I regularly use it to transport my nitro buggy to the arenadirt lot and it has transported my mini super sportster and its pieces to the ball park and back as well . I sold my last big street bike when the helmet laws came in , in the early 80s . … D.J.<o></o>
<o></o>
#68
Senior Member
RE: 1/2A and Motorcycling
ORIGINAL: MJD
What tears at my crotchrocket strings is the act that the original RG500 imported to Canada for road testing in 1985 and pictured on the front of Cycle Canada is sitting about 8 miles form my house, but the price tag - when I asked last time - is too steep for me.
The 485cc kit fits in stock cases and will work with the Toomey pipes so seems the way to go. We'll see how business goes this year..
What tears at my crotchrocket strings is the act that the original RG500 imported to Canada for road testing in 1985 and pictured on the front of Cycle Canada is sitting about 8 miles form my house, but the price tag - when I asked last time - is too steep for me.
The 485cc kit fits in stock cases and will work with the Toomey pipes so seems the way to go. We'll see how business goes this year..
As for that RG you are lusting after, I'll just throw out a quote I am famous for: "We never regret the things we do in life as much as the things we never did." Go get that bike, the difference in what you are willing to pay will long be forgotten by the time you are too old to appreciate it. I'd have one right now myself if it weren't for a lack of them to even look at.
#69
Senior Member
RE: 1/2A and Motorcycling
ORIGINAL: hllywdb
You know Tee Bee, it's been proven over and over that you can get 99% of the trips possible done on a $2000 used KLR. They could have done ''The Long Way Down'' on an old Honda 305 scrambler. The BMW is too heavy for my taste, now the KTM is the one that gets my attention. Granted it's more money than a KLR but it will get you there when everything else won't. I've thought about the South America run, but my wife, who has riden with me everywhere starting from riding to high school with me, doesn't ride her own.
You know Tee Bee, it's been proven over and over that you can get 99% of the trips possible done on a $2000 used KLR. They could have done ''The Long Way Down'' on an old Honda 305 scrambler. The BMW is too heavy for my taste, now the KTM is the one that gets my attention. Granted it's more money than a KLR but it will get you there when everything else won't. I've thought about the South America run, but my wife, who has riden with me everywhere starting from riding to high school with me, doesn't ride her own.
The KLR is a good bike for a country boy that wants to cruise country roads for 45 minutes. If you can hustle a KLR down a trail it will shake the fat but you are never allowed to forget how soft the suspension is. That said, not many 600 sized singles will crawl down a trail with the engine whispering away and then hop on the freeway and do 85 until the tank runs out. A KLR is a decent commuter-I have a brother in law that uses his year round in Boise to get to work.
I like my KLR mostly for the fact that I don't care much about or for it. I don't feel like I have to dress like a power ranger to go run an errand and if it gets rained on I don't give a rat's. There are days I wish someone would put it out of my misery though.
Kolor By Krylon Fusion Paint:
Here's another pic of the Bimota for Vicman, from the day I got it:
My current GSXR:
#70
Thread Starter
RE: 1/2A and Motorcycling
Hllydb, I wanted to like the KLR. Actually I do, but not for this trip. I have a local Kaw/HD dealer that I've traded with for many years and would have rather bought a bike from them. I plan to ride about 11,000mi over 5 weeks. About 5 miles at highway speed on a friend's KLR told me all I needed to know. I would rather be on one of those for stretches such as the Dalton Hwy but not for the thousands of interstate miles between here and there. About a week of my trip will be 2-up, so that was also a factor.
#71
Senior Member
My Feedback: (2)
RE: 1/2A and Motorcycling
ORIGINAL: flyinrog
I got so tired off switching gears on the magna I went to a scooter when I crashed it by in 2000...if this works here is my 95 sporty, 95 magna 63 Cushman, an the silverwing is under the bike cover behind the harley...Rog
oops thats the front wheel of the magna by my miata hardtop
ORIGINAL: vicman
I think I need to puke.[&:]
The only way one of those would leave me is...I don't know how that could possibly happen. Mercy on your soul man!
Personally I think a Hondamatic is right behind flying lekkies and dressing in women's clothing and wearing make-up.
Might try it once but never would I tell another soul about the experience![X(]
Vicman, I recently sold my beloved ZRX to make room for my new adventure bike.
The only way one of those would leave me is...I don't know how that could possibly happen. Mercy on your soul man!
Personally I think a Hondamatic is right behind flying lekkies and dressing in women's clothing and wearing make-up.
Might try it once but never would I tell another soul about the experience![X(]
oops thats the front wheel of the magna by my miata hardtop
joe
#72
My Feedback: (1)
Join Date: May 2003
Location: Orangeville, ON, CANADA
Posts: 8,658
Likes: 0
Received 2 Likes
on
2 Posts
RE: 1/2A and Motorcycling
ORIGINAL: DeviousDave
As for that RG you are lusting after, I'll just throw out a quote I am famous for: ''We never regret the things we do in life as much as the things we never did.'' Go get that bike, the difference in what you are willing to pay will long be forgotten by the time you are too old to appreciate it. I'd have one right now myself if it weren't for a lack of them to even look at.
As for that RG you are lusting after, I'll just throw out a quote I am famous for: ''We never regret the things we do in life as much as the things we never did.'' Go get that bike, the difference in what you are willing to pay will long be forgotten by the time you are too old to appreciate it. I'd have one right now myself if it weren't for a lack of them to even look at.
We're on the home stretch of a light restoration, going in for some paint in a week. Spring is looking good.
#75
My Feedback: (1)
Join Date: May 2003
Location: Orangeville, ON, CANADA
Posts: 8,658
Likes: 0
Received 2 Likes
on
2 Posts
RE: 1/2A and Motorcycling
For single engine, might have to scale it down a bit. If I did the napkin math right, 2200 of them along the leading edges might do it. At least it's painted with butyrate dope.
We're still searching for a bomb rack, but chances are we'll never find one. About 1500 of them were made during WWII, they were designed to hold eight 20lb bombs. Gee what a great idea, cruise by an invading ground force 500' AGL flat out at 85mph in a wood/fabric trainer and lob tiny bombs at them. No chance of getting your arse shot off there.. talk about a suicide mission. Ah, the ideas born of desperation and panic.
1940 DH82A, built at the Morris plant, s/n T.5414. Has a utility rating and we have a glider tug harness for it too. Currently has a low time 1F engine (bronze trainer heads, egads they are heavy), but we also have an aluminum head 1F engine with 13 hours and an interesting history - it was built up for the Rumpler replicas used in filming Lawrence of Arabia, we are not sure if it was a spare or was used, but no matter.
We're still searching for a bomb rack, but chances are we'll never find one. About 1500 of them were made during WWII, they were designed to hold eight 20lb bombs. Gee what a great idea, cruise by an invading ground force 500' AGL flat out at 85mph in a wood/fabric trainer and lob tiny bombs at them. No chance of getting your arse shot off there.. talk about a suicide mission. Ah, the ideas born of desperation and panic.
1940 DH82A, built at the Morris plant, s/n T.5414. Has a utility rating and we have a glider tug harness for it too. Currently has a low time 1F engine (bronze trainer heads, egads they are heavy), but we also have an aluminum head 1F engine with 13 hours and an interesting history - it was built up for the Rumpler replicas used in filming Lawrence of Arabia, we are not sure if it was a spare or was used, but no matter.