Source for BVM 91 Rotor bolt ??
#1
Thread Starter
My Feedback: (266)
Join Date: Jan 2002
Location: CA
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Source for BVM 91 Rotor bolt ??
Yikes,
BVM doesn't carry this anymore and I can't find a source
Anybody got one to sell?
Looks like 1/4 " hex socket bolt - 28 thread pitch - the tough part though is its 2.25 or 2.5" long!
I haven't found a bolt with the correct dimensions anywhere online without buying at least 50!
Also in need of a starter wand as well
Thanks
Jake
BVM doesn't carry this anymore and I can't find a source
Anybody got one to sell?
Looks like 1/4 " hex socket bolt - 28 thread pitch - the tough part though is its 2.25 or 2.5" long!
I haven't found a bolt with the correct dimensions anywhere online without buying at least 50!
Also in need of a starter wand as well
Thanks
Jake
#4
Thread Starter
My Feedback: (266)
Join Date: Jan 2002
Location: CA
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
RE: Source for BVM 91 Rotor bolt ??
I should have also mentioned - also need an aftbody fairing for the fan unit and the fairing that goes behind the cyl head if somebody's got one lying from years ago!
Jake
Jake
#6
Thread Starter
My Feedback: (266)
Join Date: Jan 2002
Location: CA
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
RE: Source for BVM 91 Rotor bolt ??
Yes, the Fiberglass fairing that's attached to the top duct cover- it directs the airflow just behind the top cylinder head
I need that and the aftbody fairing - it is about 6" FG long cone, attaches to the back of carb with an "s" shaped rod- it directs air smoothly past the back of the fan unit.
Should also add -I just realized I'm missing the 4 rubber rectangle pads that soft mount the fan unit to the mounting plates
About 1/8" thick , 1/4X1" black rubber with 2 holes in them
Let me know what you've got and how much for them
I'm in California and can Paypal
Thanks!
Jake
I need that and the aftbody fairing - it is about 6" FG long cone, attaches to the back of carb with an "s" shaped rod- it directs air smoothly past the back of the fan unit.
Should also add -I just realized I'm missing the 4 rubber rectangle pads that soft mount the fan unit to the mounting plates
About 1/8" thick , 1/4X1" black rubber with 2 holes in them
Let me know what you've got and how much for them
I'm in California and can Paypal
Thanks!
Jake
#9
My Feedback: (12)
Join Date: Dec 2001
Location: reisterstown, MD
Posts: 1,864
Likes: 0
Received 0 Likes
on
0 Posts
RE: Source for BVM 91 Rotor bolt ??
ORIGINAL: edwarda10pilot
Jake:
The rubber ''soft mount'' pads are still available from BVM as I believe they are used on the current EDF units.
Sorry
Ed
Jake:
The rubber ''soft mount'' pads are still available from BVM as I believe they are used on the current EDF units.
Sorry
Ed
#10
My Feedback: (4)
Join Date: Apr 2005
Location: Latrobe,
PA
Posts: 2,326
Likes: 0
Received 0 Likes
on
0 Posts
RE: Source for BVM 91 Rotor bolt ??
Are you just looking for a 1/4-28 bolt... 2.5" long??
Here ya go. $0.78 each.
http://www.boltdepot.com/Socket_cap_...sh_1_4-28.aspx
Here ya go. $0.78 each.
http://www.boltdepot.com/Socket_cap_...sh_1_4-28.aspx