Miniflyer

Didn't mean to offend you, it just looked very awkward in that screenshot....so i wanted to ask :-)
Best regards
Hank

PS: do you still have the drawings? Or could i get a *.stl or something similar? I'm pretty tied up at the moment, but would love to do one in 1/5 someday...

cmjets

Hi Friends:

Butch can you send me the file too ? [email protected]

Thank you very much.

I like to 1:5 scale - 2828mm long .
1540mm env.

Regards.

__________________________________________

http://cmjets.blogspot.com/

Hustler58

My Feedback: (1)

Hey guy's I don't mind sending you whatever info I have, but I need to know what format you want when you want a drawing. Butch

Miniflyer

dxf, jpeg....best format you have :-). 3D can be any catia compatible file, CATPart, stl, iges......
[email protected]

Thanks :-)

Looking at the size....hey, that bird should work out in 1:4 below 25kg......

cmjets

Hi again:

1:4 = 3535mm of fuselage. It is too much. I think.

Butch, you can send me the file in CAD or Corel or another extension.


Regards.

Hustler58

My Feedback: (1)

Sure, but I need a e-mail address. [email protected] Butch

Flyitorcrashtrying

Hello Butch, I am interested in the 3D files. Been watching B1 Bob and have a lot of time on my hands since I been out of work, so thinking about scratch building a T-38 to keep me out of trouble. I send you an email already but didn't get a response. My email is [email protected] Ihave SolidWorks (prefered) but can also use TurboCAD. Thanks, Garry

Hustler58

My Feedback: (1)

Let me go through all my stuff and see if I can find the file. Butch

Hustler58

My Feedback: (1)

Found drawing and emailed it to you. Let me know if it works. Butch

Flyitorcrashtrying

Thanks Butch. Will give me something to tinker with. Got it open with TurboCAD.

Garry

mravell

I realise that this thread is pretty old but if you guys are still about.

I'm currently modelling the T-38 in CAD (Rhino) for an EPP slope soarer but am having problems getting good, accurate drawings to go from. There are several 3 views in fairly low resolution which look to have been scanned form books. When I put the views into CAD however I am finding discrepencies galore. Stuff in one view doesn't match to the 90 degree view and the fuselage sections are in some cases very wrong.

If any of you have either drawings or suggestions where I might source same I would be very appreciative.

BTW. I'm planning on producing the fuselage on a 3D router that I designed and built. Am happy to share the pans for this if there is any interest. It is extremely low cost and produces very nice work.


Regards
Marty

Hustler58

My Feedback: (1)

Let me see if I can find them. Butch

Hustler58

My Feedback: (1)

Ok after finding the files they were corrupted for some reason. So I looked in old stuff and found a good file. Send me your email. [email protected]

Hustler58

My Feedback: (1)

OK I sent to everyone that wanted it. If you want a copy let me know before I lose it again! Butch

cmjets

Butch:

I send you another email.

Regards and many thanks in advance.

Carlos Márquez
________________________________
http://cmjets.blogspot.com.es/

Flyitorcrashtrying

Many Thanks Butch !!!

tdstaf

My Feedback: (11)

Just found this thread and would like a copy also. I have auto cad 2013 and inventor.

Thanks
Tim

FOShowNoClass

My Feedback: (7)

Can I get a copy, Butch? DXF or 3DS is fine. Whatever is easiest...

[email protected]

cmjets

Hello:

Really is a pretty jet and sure will be my next project.

Regards from Spain.
Carlos Márquez
___________________________________
http://cmjets.blogspot.com.es/