L 39 Albatros from Savex build by GRAPO s.r.o.
#1
Thread Starter
Join Date: Aug 2011
Location: , CZECH REPUBLIC
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
L 39 Albatros from Savex build by GRAPO s.r.o.
Hello,
our company team start new project:
L 39 Albatros from Savex
JetCat P20SX engine
eletric reatracts from Jet-1A Technik
-
Some info about us and our other projects:
www.grapoairtech.com
http://www.youtube.com/user/GrapoAirTech
our company team start new project:
L 39 Albatros from Savex
JetCat P20SX engine
eletric reatracts from Jet-1A Technik
-
Some info about us and our other projects:
www.grapoairtech.com
http://www.youtube.com/user/GrapoAirTech
#4
Thread Starter
Join Date: Aug 2011
Location: , CZECH REPUBLIC
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
RE: L 39 Albatros from Savex build by GRAPO s.r.o.
the build of the Savex L39 is standart for the full GFK models
We use the small but powerfull servo for rudder - is build in the moving parts :-)
We use the small but powerfull servo for rudder - is build in the moving parts :-)
#5
Thread Starter
Join Date: Aug 2011
Location: , CZECH REPUBLIC
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
RE: L 39 Albatros from Savex build by GRAPO s.r.o.
we create a set of mask from maskfilm and start with spraying the colors - we want spray so much details as a possible. Like a number 135 - red andwhite outline
#8
My Feedback: (1)
Join Date: May 2003
Location: Orangeville, ON, CANADA
Posts: 8,658
Likes: 0
Received 2 Likes
on
2 Posts
RE: L 39 Albatros from Savex build by GRAPO s.r.o.
ORIGINAL: vonRaB
Details on elevator movement - no horn outside - one servo inside the fuselage
Details on elevator movement - no horn outside - one servo inside the fuselage
I am curious to know if the nose wheel cutout is on center on yours. Mine is off by about 5mm at the front, i.e. the opening is angled to the right by a few degrees.
#9
Thread Starter
Join Date: Aug 2011
Location: , CZECH REPUBLIC
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
RE: L 39 Albatros from Savex build by GRAPO s.r.o.
yes - wooden - I like natural materials :-) and the wood has a good heat resistance
my nose wheel cutout looks straignt - I mesure it - for reatract I am still waiting
my nose wheel cutout looks straignt - I mesure it - for reatract I am still waiting