Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
#1027
Thread Starter
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
I fixed the original post... but the video is worth it... so here is a repost:
http://www.youtube.com/watch?v=pmptFkKSeYQ
SunDevilPilot
http://www.youtube.com/watch?v=pmptFkKSeYQ
SunDevilPilot
#1029
Thread Starter
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
Bungee covers are installed, I'm happy with the fit. There is about 1/4 - 1/2" extra width to allow the gear to compress without the covers interfering.
I decided I will wait until the Futaba 14SG is released and get my new receive for this plane with the radio. Should, hopefully, be about two weeks.
I decided I will wait until the Futaba 14SG is released and get my new receive for this plane with the radio. Should, hopefully, be about two weeks.
SunDevilPilot
#1032
Thread Starter
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
I gave up waiting for the radio to be released. Ordered a 6208SB HV Receiver, it's now installed and the plane is ready to fly again.
I'll do a quick CG check and put the plane in the ready position for my next outing!
SunDevilPilot
I'll do a quick CG check and put the plane in the ready position for my next outing!
SunDevilPilot
#1033
Thread Starter
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
I've been wanting to try this for a while... I made some Bezels out of solid aluminum rod for the instrument panel. Not scale but neither was my panel in the first place.
I am new to the whole metal lathe thing so it is fun when a project turns out. I learned a lot during the process.
I will probably make three more for the smaller gauges at a later date
SunDevilPilot
I am new to the whole metal lathe thing so it is fun when a project turns out. I learned a lot during the process.
I will probably make three more for the smaller gauges at a later date
SunDevilPilot
#1034
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
Gee SDP, that sure is a pretty panel! That makes mine look like a pile!
I might have missed it, but where did you get the instruments? I think I know, and indeed I could probably go back and look... but I've got other things that need tending to!
Take care,
David
I might have missed it, but where did you get the instruments? I think I know, and indeed I could probably go back and look... but I've got other things that need tending to!
Take care,
David
#1035
Thread Starter
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
ORIGINAL: Cub Flyer Fresno
Gee SDP, that sure is a pretty panel! That makes mine look like a pile!
I might have missed it, but where did you get the instruments? I think I know, and indeed Icould probably go back and look... but I've got other things that need tending to!
Take care,
David
Gee SDP, that sure is a pretty panel! That makes mine look like a pile!
I might have missed it, but where did you get the instruments? I think I know, and indeed Icould probably go back and look... but I've got other things that need tending to!
Take care,
David
Printed on photo paper.
SunDevilPilot
#1036
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
Ah, very cool! Good idea, as long as you have the flight sim. Since I was matching three instruments from Anthony (the two outer instruments were too large), I had to take a screen shot of some that Robert recommended, used Paint Shop Pro to crop them, pasted them into AutoCAD and redrew them to 1/4 scale, then printed onto photo paper. WHEW! They don't look as good as yours but at least they all match.
#1038
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
ORIGINAL: Cub Man
Hey guys I do have for sale just instruments only for $5.00. They are printed on gloss photo at 1200 DPI I can do them in 1/4 and 1/3 scale
Hey guys I do have for sale just instruments only for $5.00. They are printed on gloss photo at 1200 DPI I can do them in 1/4 and 1/3 scale
NOW YOU TELL ME! Sorry, already got em done. Boy, I could have savedA LOT of time!
Oh, by the way, did you get my bungee covers in the mail yet? If not, that's okay. I probably have another nine months to go before I'm finished...
#1041
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
Looks like you're getting the hang of that lathe real quick. Nice Job. I'll bet you can even make some nice knobs for your dash as well...
#1042
Thread Starter
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
Turning metal is a lot of fun... Strangely relaxing.
This morning I finished up the smaller bezels.
I think the Nieuport is going to get something out of brass!
SunDevilPilot
This morning I finished up the smaller bezels.
I think the Nieuport is going to get something out of brass!
SunDevilPilot
#1044
Thread Starter
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
The aluminum rod I have was purchased from Tower Hobbies a long time ago, K&S brand I believe.
When I get the brass for the Nieuport I'm going to try WWW.OnlineMetals.Com. They allow you to order just about anything, have a lot of info about each type of metal, and have no minimums.
SunDevilPilot
When I get the brass for the Nieuport I'm going to try WWW.OnlineMetals.Com. They allow you to order just about anything, have a lot of info about each type of metal, and have no minimums.
SunDevilPilot
#1045
Join Date: Jan 2006
Location: China,
MI
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
An other nice place is http://www.mcmaster.com/# I have used them for years for hardware and metals, order today have it the next day.
Ken
Ken
#1046
My Feedback: (1)
Join Date: Oct 2007
Location: Port St Lucie, Florida
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
I HAVE BEEN FLYING ONE FOR THE PAST 8 YEARS. I ALSO CONVERTED IT TO a Super Cub clipped wing version of Sigs Kit. It flys with a Fuji 24. It is much more aerobatic with the clipped wings. I have been flying for 30 years with 40-50 different aircraft over that time, and this has been my most fun plane to fly. JMPUPS
#1047
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
Beautiful work SDP! I logged in to RCU so I can comment on this great build you have allowed us to keep track of. I just received my sig 1/4 cub that I will be building for my father as he built many kits for me when I was younger (just a way to give back to him, you know). Thank you for this thread and all the great pictures/details/mods you have shared with us. I can't wait to get to buildin'!
#1048
Thread Starter
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
Thanks a lot.. The kit is a great build.
I just finished double checking the CG after the rebuild and the plane is all prepped for its "Re-Maiden" tomorrow morning. Should be a lot of fun!
Glad it is back in flying condition.
SunDevilPilot
I just finished double checking the CG after the rebuild and the plane is all prepped for its "Re-Maiden" tomorrow morning. Should be a lot of fun!
Glad it is back in flying condition.
SunDevilPilot
#1049
My Feedback: (4)
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
Hey SDP,
I just re-read your build thread and could not seem to find an answer to my question, so here goes.....Did you spray the Glass kote right over the Solartex or spray clear dope before paint ? getting ready to spray some Glass kote and was wondering ?
Don
I just re-read your build thread and could not seem to find an answer to my question, so here goes.....Did you spray the Glass kote right over the Solartex or spray clear dope before paint ? getting ready to spray some Glass kote and was wondering ?
Don
#1050
Thread Starter
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
You can paint Klass Kote right on top of solartex. No primer needed. Just tack rag the covering and spray away.
SunDevilPilot