Which motor for Ef-1 pylon?
#2
RE: Which motor for Ef-1 pylon?
I'm partial to the Eflite 25, not one issue, good survivability. Great performance. Most of the guys up here in MT, WA are running them with good success.
Ed 23g
Ed 23g
#3
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
RE: Which motor for Ef-1 pylon?
Doesn't seem to any clear favorite.
The Arrowind and OS are a little lighter, so if the plane you are building needs less nose weight, that might be an option.
If you are putting a Shoestring together, the e-flite will be much easier to install.
The Arrowind mounting is different and the OS is a larger diameter than the e-flite and it is very tight up front in the cowl on the Shoestring.
Cowl to far forward and you rub against back plate. Cowl too far back and the outside of the motor rubs on the inside of the cowl.
- Joe.
The Arrowind and OS are a little lighter, so if the plane you are building needs less nose weight, that might be an option.
If you are putting a Shoestring together, the e-flite will be much easier to install.
The Arrowind mounting is different and the OS is a larger diameter than the e-flite and it is very tight up front in the cowl on the Shoestring.
Cowl to far forward and you rub against back plate. Cowl too far back and the outside of the motor rubs on the inside of the cowl.
- Joe.