new motor, break in help
#1
Junior Member
Thread Starter
Join Date: Feb 2013
Location: , SC
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
new motor, break in help
Installing a new dynamite .21 on my lx1 tonight. What's the best method to break it in, and also on the idle tank should then wheels be on or off the ground
#2
Senior Member
Join Date: Oct 2009
Location: rossville,
GA
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
RE: new motor, break in help
read the manual it will tell you. i run the dynamite .21 in my lx 1. i broke mine in off the ground 6 idle tanks let cool down between each one of them. make sure it runs rich. and have a extra glow plug. ive raced mine 3 years now with no issues. and when you stop the motor make sure the piston is in the down position.
#3
Senior Member
Join Date: Oct 2006
Location: Sonoma,
CA
Posts: 1,289
Likes: 0
Received 0 Likes
on
0 Posts
RE: new motor, break in help
ORIGINAL: stroyick
Installing a new dynamite .21 on my lx1 tonight. What's the best method to break it in, and also on the idle tank should then wheels be on or off the ground
Installing a new dynamite .21 on my lx1 tonight. What's the best method to break it in, and also on the idle tank should then wheels be on or off the ground