Traxxas XL 2.5 wire loose
#1
Junior Member
Thread Starter
Join Date: Nov 2012
Location: , CA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Traxxas XL 2.5 wire loose
One of the wires on my son's traxxas has come off. I don't want to buy a whole new unit, could it be effectively soldered? I checked internally and it doesn't look like it can just be replaced.
Here is a picture
http://imgur.com/Mf6oKQd,P4uo8fb
http://imgur.com/Mf6oKQd,P4uo8fb#1
Thanks in advance
#2
My Feedback: (35)
Join Date: Jul 2003
Location: Bowling Green,
KY
Posts: 2,497
Likes: 0
Received 0 Likes
on
0 Posts
RE: Traxxas XL 2.5 wire loose
Your in the airplane section of RCU. You'll get faster help in the car section. But to give you a quick answer, yes buy a set of Traxxas plugs and solder one back on. Dennis
http://www3.towerhobbies.com/cgi-bin...?&I=LXSDC2&P=M
http://www3.towerhobbies.com/cgi-bin...?&I=LXSDC2&P=M
#4
Senior Member
My Feedback: (17)
Join Date: Aug 2012
Location: Manchester,
NH
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
RE: Traxxas XL 2.5 wire loose
Like he said, all you gotta do is go to your local hobby shop and Buy a male traxxas connector and just resolder the one that fell out and remove the one still attached to that connector and just re solder the both of them on the new one. The new one will have the leads out of the plastic so you can solder the wire to them then slide them into the plastic and they lock in for good...hope this helps...Goodluck