Ryan STA/STM Brotherhood
#101
Thread Starter
RE: Ryan STA/STM Brotherhood
You're in! That was easyGlad to have you and make sure you check out VJ's (#2) thread, he is getting real close to being finished and has another fine example of this classic from his club.
#1 Raptureboy, PA
#2 VincentJ, NH
#3 lovehydro, WA
#4 Acerc, FL
#5 I-Fly, MI
#6 Yank II, AZ
#7 Culver, PA
#8 Rick Boyer, PA
#9 Daniel EL. OH
#10 RBardin,GA
#11 Jeff W, NM
#12 cub flyer fresno, CA
#13 jaybird, ME
#14 kiwi-al, NZ
#15 stuntflyr, CA
#16 yel914, UT
#17 126jp, NC
# 18 Ken Kehler, OK
#19 Thomas B, TX
#20 Michael2k, DE
#21 Highplains, KS
#22 ron9844, NH
#23 franc, South Africa
#24 Cavoodle, NZ
#25 proteus_x3, NJ
#26 jymster, Aus
#27 FlyerInOKC, OK
#28 deadstik79, NM
#1 Raptureboy, PA
#2 VincentJ, NH
#3 lovehydro, WA
#4 Acerc, FL
#5 I-Fly, MI
#6 Yank II, AZ
#7 Culver, PA
#8 Rick Boyer, PA
#9 Daniel EL. OH
#10 RBardin,GA
#11 Jeff W, NM
#12 cub flyer fresno, CA
#13 jaybird, ME
#14 kiwi-al, NZ
#15 stuntflyr, CA
#16 yel914, UT
#17 126jp, NC
# 18 Ken Kehler, OK
#19 Thomas B, TX
#20 Michael2k, DE
#21 Highplains, KS
#22 ron9844, NH
#23 franc, South Africa
#24 Cavoodle, NZ
#25 proteus_x3, NJ
#26 jymster, Aus
#27 FlyerInOKC, OK
#28 deadstik79, NM
#103
Senior Member
My Feedback: (25)
Join Date: Apr 2004
Location: Mankato,
MN
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ryan STA/STM Brotherhood
Count me in! I have a NIB Byron kit in the queue to be built hopefully later this year. I'd also love to pick up a Sig kit if I could find one sometime.
#107
Thread Starter
RE: Ryan STA/STM Brotherhood
Your in! welcome aboard.
#1 Raptureboy, PA
#2 VincentJ, NH
#3 lovehydro, WA
#4 Acerc, FL
#5 I-Fly, MI
#6 Yank II, AZ
#7 Culver, PA
#8 Rick Boyer, PA
#9 Daniel EL. OH
#10 RBardin,GA
#11 Jeff W, NM
#12 cub flyer fresno, CA
#13 jaybird, ME
#14 kiwi-al, NZ
#15 stuntflyr, CA
#16 yel914, UT
#17 126jp, NC
# 18 Ken Kehler, OK
#19 Thomas B, TX
#20 Michael2k, DE
#21 Highplains, KS
#22 ron9844, NH
#23 franc, South Africa
#24 Cavoodle, NZ
#25 proteus_x3, NJ
#26 jymster, Aus
#27 FlyerInOKC, OK
#28 deadstik79, NM
#29 staggerflyer, IA
#1 Raptureboy, PA
#2 VincentJ, NH
#3 lovehydro, WA
#4 Acerc, FL
#5 I-Fly, MI
#6 Yank II, AZ
#7 Culver, PA
#8 Rick Boyer, PA
#9 Daniel EL. OH
#10 RBardin,GA
#11 Jeff W, NM
#12 cub flyer fresno, CA
#13 jaybird, ME
#14 kiwi-al, NZ
#15 stuntflyr, CA
#16 yel914, UT
#17 126jp, NC
# 18 Ken Kehler, OK
#19 Thomas B, TX
#20 Michael2k, DE
#21 Highplains, KS
#22 ron9844, NH
#23 franc, South Africa
#24 Cavoodle, NZ
#25 proteus_x3, NJ
#26 jymster, Aus
#27 FlyerInOKC, OK
#28 deadstik79, NM
#29 staggerflyer, IA
#109
RE: Ryan STA/STM Brotherhood
ORIGINAL: Vintauri
Count me in! I have a NIB Byron kit in the queue to be built hopefully later this year. I'd also love to pick up a Sig kit if I could find one sometime.
Count me in! I have a NIB Byron kit in the queue to be built hopefully later this year. I'd also love to pick up a Sig kit if I could find one sometime.
Bill, Waco Brother #1
#110
My Feedback: (6)
RE: Ryan STA/STM Brotherhood
I remember back when the earth was young and still cooling and dinosaurs still roamed the earth and I was a young and stupid new builder and foam wings became all the rage. It seeme like all the kit manufactures were giving foam wings a try to speed up the building process. I built several and hated the wings! I'm glad that is one fad that has died for the most part!
#111
Senior Member
My Feedback: (25)
Join Date: Apr 2004
Location: Mankato,
MN
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ryan STA/STM Brotherhood
ORIGINAL: Stickbuilder
Steve, be sure to frame up a new set of wings when you do break it out. The foam wings are garbage pure and simple.
Bill, Waco Brother #1
ORIGINAL: Vintauri
Count me in! I have a NIB Byron kit in the queue to be built hopefully later this year. I'd also love to pick up a Sig kit if I could find one sometime.
Count me in! I have a NIB Byron kit in the queue to be built hopefully later this year. I'd also love to pick up a Sig kit if I could find one sometime.
Bill, Waco Brother #1
Steve
#113
My Feedback: (9)
RE: Ryan STA/STM Brotherhood
Hi all,
Does anyone here have the Ev Cassagneres drawings for the Ryan STA? I have about 15 drawings (I believe the whole set is over 200), showing most of the major parts and assemblies that would be relevant to a modeller, but I am missing drawings for Bulkheads #2 & #3, as well as several other drawings. Please let me know. Thanks.
Does anyone here have the Ev Cassagneres drawings for the Ryan STA? I have about 15 drawings (I believe the whole set is over 200), showing most of the major parts and assemblies that would be relevant to a modeller, but I am missing drawings for Bulkheads #2 & #3, as well as several other drawings. Please let me know. Thanks.
#115
Senior Member
Join Date: Feb 2003
Location: Wasilla, AK
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ryan STA/STM Brotherhood
On a cold Alaska day I was on another forum discussing RC aircraft when I remembered I was a member here, have not posted in years, even longer since I worked on my Byron Ryan STA. Its mostly complete except for control lines, engine and paint. I have heard this model is actually kinda rare now that its been out pf production for many years, I bought mine in 1990 or 91 last I remember, last time I worked on it was about 6 years ago, its been sitting in my upstairs storage room all this time, I even had plans of using a salvaged chainsaw motor in it at one time.
Its a big plane, I was energetic about building it but stopped short about flying it, one crash and then it would be history, so maybe I'll finish as a giant static model.
Its a big plane, I was energetic about building it but stopped short about flying it, one crash and then it would be history, so maybe I'll finish as a giant static model.
#116
Thread Starter
RE: Ryan STA/STM Brotherhood
Beautiful BARF there bushwacker! Good kuck in the masters.
#1 Raptureboy, PA
#2 VincentJ, NH
#3 lovehydro, WA
#4 Acerc, FL
#5 I-Fly, MI
#6 Yank II, AZ
#7 Culver, PA
#8 Rick Boyer, PA
#9 Daniel EL. OH
#10 RBardin,GA
#11 Jeff W, NM
#12 cub flyer fresno, CA
#13 jaybird, ME
#14 kiwi-al, NZ
#15 stuntflyr, CA
#16 yel914, UT
#17 126jp, NC
# 18 Ken Kehler, OK
#19 Thomas B, TX
#20 Michael2k, DE
#21 Highplains, KS
#22 ron9844, NH
#23 franc, South Africa
#24 Cavoodle, NZ
#25 proteus_x3, NJ
#26 jymster, Aus
#27 FlyerInOKC, OK
#28 deadstik79, NM
#29 staggerflyer, IA
#30 bushwacker404, CA
#1 Raptureboy, PA
#2 VincentJ, NH
#3 lovehydro, WA
#4 Acerc, FL
#5 I-Fly, MI
#6 Yank II, AZ
#7 Culver, PA
#8 Rick Boyer, PA
#9 Daniel EL. OH
#10 RBardin,GA
#11 Jeff W, NM
#12 cub flyer fresno, CA
#13 jaybird, ME
#14 kiwi-al, NZ
#15 stuntflyr, CA
#16 yel914, UT
#17 126jp, NC
# 18 Ken Kehler, OK
#19 Thomas B, TX
#20 Michael2k, DE
#21 Highplains, KS
#22 ron9844, NH
#23 franc, South Africa
#24 Cavoodle, NZ
#25 proteus_x3, NJ
#26 jymster, Aus
#27 FlyerInOKC, OK
#28 deadstik79, NM
#29 staggerflyer, IA
#30 bushwacker404, CA
#117
Thread Starter
RE: Ryan STA/STM Brotherhood
Break that puppy out and get'er doneman! Don't be afraid of it, we all have to face that day, everyone of them has an expiration date but don't let that stop you from enjoying her.
#118
My Feedback: (6)
RE: Ryan STA/STM Brotherhood
In case you missed is new SIG STA kit posted under the heading "Large lot of vintage kits "! Asking price is $270.
http://www.rcuniverse.com/market/item.cfm?itemId=911547
http://www.rcuniverse.com/market/item.cfm?itemId=911547
#119
Senior Member
Join Date: Jun 2008
Location: Fredericksburg,
TX
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ryan STA/STM Brotherhood
I'm on currently page 22 of Vincent's incredible build and taking notes for reference on my future SIG STA build. My affection for Ryans' has been passionate for several years and bought my SIG kit about 28 years ago. It never got built due to the great fortune in finding and restoring a full scale Ryan PT-21/22. The PT was restored, flown and sadly sold a few years later and the SIG STA kit remains waiting to be built.
I also have a currently flying modified Sportsman Aviation YPT-16 converted to EP and a recent Herr Engineering ST EP conversion nearing completion.
Please add me to the list of the Brotherhood and thanks for providing a place for us to get together.
Dick, aka Capt Easy
I also have a currently flying modified Sportsman Aviation YPT-16 converted to EP and a recent Herr Engineering ST EP conversion nearing completion.
Please add me to the list of the Brotherhood and thanks for providing a place for us to get together.
Dick, aka Capt Easy
#120
Thread Starter
RE: Ryan STA/STM Brotherhood
Hey Capt, glad to have you on board and your welcome. Man I would give my right arm and learn to fly with one to have a real Ryan PT-22, so sorry to hear you had to sell her, that had to be heart breaking. Vincent sure is an incredible builder isn't he. Great detail on your Ryan there, love the real leather coming.
#1 Raptureboy, PA
#2 VincentJ, NH
#3 lovehydro, WA
#4 Acerc, FL
#5 I-Fly, MI
#6 Yank II, AZ
#7 Culver, PA
#8 Rick Boyer, PA
#9 Daniel EL. OH
#10 RBardin,GA
#11 Jeff W, NM
#12 cub flyer fresno, CA
#13 jaybird, ME
#14 kiwi-al, NZ
#15 stuntflyr, CA
#16 yel914, UT
#17 126jp, NC
# 18 Ken Kehler, OK
#19 Thomas B, TX
#20 Michael2k, DE
#21 Highplains, KS
#22 ron9844, NH
#23 franc, South Africa
#24 Cavoodle, NZ
#25 proteus_x3, NJ
#26 jymster, Aus
#27 FlyerInOKC, OK
#28 deadstik79, NM
#29 staggerflyer, IA
#30 bushwacker404, CA
#31 Capt Easy, TX
#1 Raptureboy, PA
#2 VincentJ, NH
#3 lovehydro, WA
#4 Acerc, FL
#5 I-Fly, MI
#6 Yank II, AZ
#7 Culver, PA
#8 Rick Boyer, PA
#9 Daniel EL. OH
#10 RBardin,GA
#11 Jeff W, NM
#12 cub flyer fresno, CA
#13 jaybird, ME
#14 kiwi-al, NZ
#15 stuntflyr, CA
#16 yel914, UT
#17 126jp, NC
# 18 Ken Kehler, OK
#19 Thomas B, TX
#20 Michael2k, DE
#21 Highplains, KS
#22 ron9844, NH
#23 franc, South Africa
#24 Cavoodle, NZ
#25 proteus_x3, NJ
#26 jymster, Aus
#27 FlyerInOKC, OK
#28 deadstik79, NM
#29 staggerflyer, IA
#30 bushwacker404, CA
#31 Capt Easy, TX
#121
Senior Member
Join Date: Jun 2008
Location: Fredericksburg,
TX
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ryan STA/STM Brotherhood
I'm proud to come aboard. I'm soaking up every page of Vincent's thread like a sponge with every intention of trying to apply as much as I can to my future STA build. With only about 4-1/2 years RC experience the SIG kit will really be a huge challenge.
Thanks for the welcome to the Brotherhood and the kind words.
CE
Thanks for the welcome to the Brotherhood and the kind words.
CE
#122
My Feedback: (1)
Join Date: Apr 2009
Location: washington twp.,
MI
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ryan STA/STM Brotherhood
Hey Raptureboy,
Count me in. I have been wanting a STA from the day I saw one hanging in the Detroit Institute of Arts museum. I can't believe my luck. Today I found a guy, only 20 miles from me, selling a Sig Ryan STA Special. The airframe has been completed except for all the plastic parts and covering. Can't wait to finish it. Got the plane, plans, box and all the parts to finish it for $100.00. The only thing missing is the decal graphics sheet. Does anyone know where I can get that or have another option.
Thanks
Tom
Count me in. I have been wanting a STA from the day I saw one hanging in the Detroit Institute of Arts museum. I can't believe my luck. Today I found a guy, only 20 miles from me, selling a Sig Ryan STA Special. The airframe has been completed except for all the plastic parts and covering. Can't wait to finish it. Got the plane, plans, box and all the parts to finish it for $100.00. The only thing missing is the decal graphics sheet. Does anyone know where I can get that or have another option.
Thanks
Tom
#123
My Feedback: (6)
RE: Ryan STA/STM Brotherhood
ORIGINAL: tacx
Hey Raptureboy,
Count me in. I have been wanting a STA from the day I saw one hanging in the Detroit Institute of Arts museum. I can't believe my luck. Today I found a guy, only 20 miles from me, selling a Sig Ryan STA Special. The airframe has been completed except for all the plastic parts and covering. Can't wait to finish it. Got the plane, plans, box and all the parts to finish it for $100.00. The only thing missing is the decal graphics sheet. Does anyone know where I can get that or have another option.
Thanks
Tom
Hey Raptureboy,
Count me in. I have been wanting a STA from the day I saw one hanging in the Detroit Institute of Arts museum. I can't believe my luck. Today I found a guy, only 20 miles from me, selling a Sig Ryan STA Special. The airframe has been completed except for all the plastic parts and covering. Can't wait to finish it. Got the plane, plans, box and all the parts to finish it for $100.00. The only thing missing is the decal graphics sheet. Does anyone know where I can get that or have another option.
Thanks
Tom
#124
Thread Starter
RE: Ryan STA/STM Brotherhood
Really, some of us just fall into it,I bought a 1/4 scale Sig cub all framed up for $75 this past fall. Welcome aboard tacx, what a great find!
#1 Raptureboy, PA
#2 VincentJ, NH
#3 lovehydro, WA
#4 Acerc, FL
#5 I-Fly, MI
#6 Yank II, AZ
#7 Culver, PA
#8 Rick Boyer, PA
#9 Daniel EL. OH
#10 RBardin,GA
#11 Jeff W, NM
#12 cub flyer fresno, CA
#13 jaybird, ME
#14 kiwi-al, NZ
#15 stuntflyr, CA
#16 yel914, UT
#17 126jp, NC
# 18 Ken Kehler, OK
#19 Thomas B, TX
#20 Michael2k, DE
#21 Highplains, KS
#22 ron9844, NH
#23 franc, South Africa
#24 Cavoodle, NZ
#25 proteus_x3, NJ
#26 jymster, Aus
#27 FlyerInOKC, OK
#28 deadstik79, NM
#29 staggerflyer, IA
#30 bushwacker404, CA
#31 Capt Easy, TX
#32 tacx, MI
#1 Raptureboy, PA
#2 VincentJ, NH
#3 lovehydro, WA
#4 Acerc, FL
#5 I-Fly, MI
#6 Yank II, AZ
#7 Culver, PA
#8 Rick Boyer, PA
#9 Daniel EL. OH
#10 RBardin,GA
#11 Jeff W, NM
#12 cub flyer fresno, CA
#13 jaybird, ME
#14 kiwi-al, NZ
#15 stuntflyr, CA
#16 yel914, UT
#17 126jp, NC
# 18 Ken Kehler, OK
#19 Thomas B, TX
#20 Michael2k, DE
#21 Highplains, KS
#22 ron9844, NH
#23 franc, South Africa
#24 Cavoodle, NZ
#25 proteus_x3, NJ
#26 jymster, Aus
#27 FlyerInOKC, OK
#28 deadstik79, NM
#29 staggerflyer, IA
#30 bushwacker404, CA
#31 Capt Easy, TX
#32 tacx, MI
#125
My Feedback: (1)
Join Date: Apr 2009
Location: washington twp.,
MI
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
RE: Ryan STA/STM Brotherhood
Thanks raptureboy,
I'm excited about this build. Always wanted a Ryan. I'm still reading through this forum and the Vincent build forum. Coming up with allot of questions I will sure to have shortly.
I have built and rebuilt quit a few modern day kits. But, the methods used in this old Sig kit just boggle my mind. Especially the hinge making process. With all the newest products, now on the market, we new builders have it pretty easy compared to the old days.
Here are a couple quick questions for now.
1. Are the flying wires for show or are they actually needed. I like the look. Just not sure I want to hassle with them every time I go to the field.
2. I have noticed , so far, that allot of the guys are building the kit and not using all the fairings. Is this because they are difficult to install or what?
Well, for now I will continue to read.
Thanks
Tom
I'm excited about this build. Always wanted a Ryan. I'm still reading through this forum and the Vincent build forum. Coming up with allot of questions I will sure to have shortly.
I have built and rebuilt quit a few modern day kits. But, the methods used in this old Sig kit just boggle my mind. Especially the hinge making process. With all the newest products, now on the market, we new builders have it pretty easy compared to the old days.
Here are a couple quick questions for now.
1. Are the flying wires for show or are they actually needed. I like the look. Just not sure I want to hassle with them every time I go to the field.
2. I have noticed , so far, that allot of the guys are building the kit and not using all the fairings. Is this because they are difficult to install or what?
Well, for now I will continue to read.
Thanks
Tom