jermainezey

am making this tread so i can be follow on my build which is going be a 1/4 scale sum where a long in there rat rod the engine is a 6.0 ohv engine which am mod to make it more to fit the hot rod look better

jermainezey

here what my block look like before paint

jermainezey

after paint which was done last night still lots a work ahead still got design and build frame am just starting on the engine as i have had it over a year i bought it for this project

tapkoote

Hot rods rule
I'll be watching this good luck.
What make engine it that?
tap

Lars from Norway

Seems a bit Briggs & Stratton to me

jermainezey

its is
the engine is

jermainezey

the engine is a B&S 6.0 OHV ENGINE FROM A TILLER I WILL BE REBUILDING IT WITH UPGRADED PARTS RIGHT NOW ALL I DONE IS REMOVE GOV.. FROM THE ENGINE LONG PARTS LIST TO GO FOR THIS BUILD here two more pics i just took before i go off to work tonite i just went ahead paint head to match engine head color will be changed later for now i like it

jermainezey

got a start of the lay out of the frame the cardboard center just there to get every thing in line i will have to do some cutting as sum parts are to long and other are to short this project going be a 2 frame setup where it will be a upper and lower frame this is to add space in the center of the two to run the drive train things of that short

Dirty_Vinylpusher

Always good to see more homebuilds.
I'll be watching too

jermainezey

in the pic i have already is if i go with making it 36 in long i think am going make it 46 in so i can kind build it more to the way i want it to look i still will be using the old broken chair for my frame the project will have a lil history as the chair was one my granddaddy cover before he past away the chair was owned by my grandmoma till she gave it to me 4 years ago then a few mouths ago cable man came to install my cable and he broke it am bout to post pics at 48 in long

mikula_os

Bravo for cable man, he pushed you to start this project
Keep going!

jermainezey

sorry for not having any updates as i aint been working on this project as i have not had any free time yet ,

Dirty_Vinylpusher

Don't stress it mate, these things take time.

jermainezey

am still trying to get pulley of the engine so i can least get it up and going

Dirty_Vinylpusher

Is it seized on to the shaft?
Might have to take it in to a mechanic's shop as they'll have the proper gear to remove it.
Better to do that than risk damaging it if you haven't got the right equipment available.

A sixpack of beer usually gets something like that done on a Friday afternoon

jermainezey

i think it might i have tried every thing . am still trying make mind if am going with a rat rod or if i want to go 4 wheel drive and build sum kind of mud rig . i dont know if i want to go with if live go kart rear end or one out a lawn mower and trying stay as light as i can with this build as i will be building it in my apartment in a up stairs bed room

Sigma.40

My Feedback: (1)

I love watching other people build stuff, 'cause I lack the knowledge.

Bring on the pics!!!

jermainezey

am trying get every thing cut out for the lower frame so i can start taking pics , i have made up my mind to go with a water cool setup . hold up i know what u think no am not going to mod the engine am just going have tubing warped around the engine head which water will pump thur it have a atv radiator which i will mod the inlet and out let. my inlet no going be mod as the pump am using the inlet on it will fit a reg. hose and the pump let is just the size to fit my tubing only mod will be the line from the engine back to the raditor it will have a electric fan ...this going to be build to look like a hot rod and i want things on to make it look real this not going be nothing i play with a lot its going be mostly for show how ever i will play with it ever now and then

kenazzo2000

hi great job your doing i like home builds .i like to build cars myself you will get there in the end it take s time mate so dont rush things keep us all updated

jermainezey

right now am still doing the blue prints and looking for the parts that am going be using

Sigma.40

My Feedback: (1)

Take your time and plan but please post pics as you build it!

jermainezey

am change the project a lil bit am going build a electric buggy first then i will get back to hot rod project will be post pics very soon

jermainezey

still cant get pulley off the 6.0 b&s

jermainezey

just a update on the build i have a guy making me sum a arms both upper and lower i have the engine broken down for the rebuild with hop up parts will post photos soon

jermainezey

sorry i have not post any thing new just been trying to get back on my feet my grandmother had a stroke