killerG

My Feedback: (32)

I am using a 401 on the rudder of my jet. Where I fly there it is almost always a little wind. Is it possible to set up the gain on a knob or slider so I can fine tune the gain during flight. I will only be using it in rate mode not HH mode. I do know that when turned on it has to be in HH mode, which is set up already. I am using a 12Z.
Thanks

Bax

My Feedback: (11)

In the instructions, Futaba calls it "Gyro Sensitivity". You select which channel will control it and then plug the connector from the gyro into that channel in the receiver.