jato 3.3 upgrades help?
#1
Member
Thread Starter
Join Date: Apr 2013
Location: , TX
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
jato 3.3 upgrades help?
Alright so this thing is like complete junk, my buddy gave it to me and it looks like he never took it apart to clean it once the whole 2 years he had it!
so my question is what would be the best hopups for this? i'll be doing speed runs with this mostly.
so my question is what would be the best hopups for this? i'll be doing speed runs with this mostly.
#2
RE: jato 3.3 upgrades help?
Ok, been running 2 jatos for 2 years. First the arms to RPM. Upgrade the stock clutchbell to a robinson racing hardened steel, spur and transmission gearing to hardened steel. Change the shock towers to aluminum, install a front brace from bulkhead to top tray. That's a weak point. The rest is merely cosmetic.
#3
Member
Thread Starter
Join Date: Apr 2013
Location: , TX
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
RE: jato 3.3 upgrades help?
I'm gonna get a new dual brake system to and where does the throttle return spring go? Its not attached to where it should be on one end. It just hangs there on (not sure what this part is called so ill describe it) the rod that connects the carb to the steering throttle (it opens up the carb).
And if you could supply me with a picture that would be great to
#5
Member
Join Date: Jan 2011
Location: RAF Lakenheath,
AE
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
RE: jato 3.3 upgrades help?
ORIGINAL: xNitroAddictx
Should i get a 3 shoe clutch setup?
Should i get a 3 shoe clutch setup?
#8
Member
Thread Starter
Join Date: Apr 2013
Location: , TX
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
RE: jato 3.3 upgrades help?
I totally agree nasty, and i will be dropping a .21 os or novarossi in this, will defiantly be upgrading all the gears to harden steel, but i will keep the spur plastic for a weak point. Need a bb conversion kit though, anyone know a good one?