Fei Bao Hawk
04-06-2009, 06:08 AM
#129
RE: Fei Bao Hawk
If I understand your question you must have purchased the arf without the factory installed doors...correct?
The manual does not cover installation of the doors or speed brakes, so here are a few photos that should help.
If you don't have the hinges and cylinders you can purchase them from Wagner at RC Jets Models.
BTW the cylinders measure 5" (127 mm) in length fully extended from end to end
The manual does not cover installation of the doors or speed brakes, so here are a few photos that should help.
If you don't have the hinges and cylinders you can purchase them from Wagner at RC Jets Models.
BTW the cylinders measure 5" (127 mm) in length fully extended from end to end
04-06-2009, 11:47 AM
#130
RE: Fei Bao Hawk
i need that pictures from the Hawk, this is from T45, the jet is the same but the airbrake system from the hawk.. is only one in the center.... can anyone have pictures from it...?
04-19-2009, 02:40 PM
#131
RE: Fei Bao Hawk
please could any one let me know the best way to do the elevators ie one servo or two i as thinkin of joining them together and have one controll arm if anyone have any photos or any other mods please could you let me know thank you
09-20-2009, 04:06 PM
#134
RE: Fei Bao Hawk
has any one got lots of air time with these hawks could any one tell me if you need a lot of elevator to pull it around the turns as i have just flew mine with the c/g at 180mm and 40mm of elevator movement can anyone help
07-19-2012, 11:18 AM
#141
Senior Member
My Feedback: (13)
Join Date: Jan 2003
Location: Effort,
PA
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
RE: Fei Bao Hawk
I see the last post is almost 3 years old. Thought I'd bring it back to life with my almost completed Hawk.
Are there any flying that have any info on what the cg and the throws are?
Here's a couple of pics of mine.
Are there any flying that have any info on what the cg and the throws are?
Here's a couple of pics of mine.
04-30-2013, 06:03 AM
#145
RE: Fei Bao Hawk
Hey Paul how are you?
I received mine from Mike. Was just looking to see if anyone else
had one they where flying.
Wondering how slow it lands with new washout and flap design
I received mine from Mike. Was just looking to see if anyone else
had one they where flying.
Wondering how slow it lands with new washout and flap design
04-30-2013, 06:09 AM
#146
RE: Fei Bao Hawk
Warpsflyer, it is indeed a beautiful airplane. The cockpit details are great and the finish is stunning.
I will be starting mine soon and will be sending the pictures and build info over to Mike @ Global Jets to update the manual.
I will be starting mine soon and will be sending the pictures and build info over to Mike @ Global Jets to update the manual.
09-29-2013, 01:08 PM
#148
My Feedback: (6)
Hi ,
The new designed wing with a new airfoil and a 2 degree washout absolutely solved the old Hawks problems .
The flap deployment does very litle effect on the pitch atitude .
Center of Gravity should be 195mm ~205mm backwards from wing LE at root .
Aileron throw +/- 20 mm high rate 25% expo . +/- 12mm low rate 20% expo.
Elevator throw +/- 40mm 35~40 % expo.
We fly the model with a P-80SE. And a 3lt fuel tank ...
The new designed wing with a new airfoil and a 2 degree washout absolutely solved the old Hawks problems .
The flap deployment does very litle effect on the pitch atitude .
Center of Gravity should be 195mm ~205mm backwards from wing LE at root .
Aileron throw +/- 20 mm high rate 25% expo . +/- 12mm low rate 20% expo.
Elevator throw +/- 40mm 35~40 % expo.
We fly the model with a P-80SE. And a 3lt fuel tank ...
03-10-2014, 05:13 PM
#149
Senior Member
Join Date: Feb 2006
Location: catoosa,
OK
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
I am considering this airplane for my next project. Any new news on how the thing flies and any mods you guys are doing to it to make it fly better/different. Are you guys happy with it?