Buggy Help (Lx1e)
#1
Senior Member
Thread Starter
Join Date: Jul 2007
Location: Des Moines, IA
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Buggy Help (Lx1e)
Hi all,
I purchased a LX1E roller some years ago and I am finally getting around to it but still am unsure of some thing. I hope you fine folks out there can help.
1) The gentleman who had this vehicle before me removed the center diff. I am only planning on bashing with this RC so would the lack of a center diff deter this?
2) I think the gearing is stock (14/51) would it be ok to run the following gear:
[link=http://hobbyking.com/hobbyking/store/__22632__Turnigy_TrackStar_120A_Brushless_Short_Co urse_Truck_ESC.html]Turnigy Track Star 120a[/link]
[link=http://hobbyking.com/hobbyking/store/__17980__Turnigy_1_8th_Scale_4_Pole_Brushless_Moto r_1900KV.html]Turnigy 1900kv 4 pole[/link]
[link=http://hobbyking.com/hobbyking/store/__21003__Turnigy_4500mAh_4S_30C_hardcase_pack_ROAR _APPROVED_.html]Turnigy 4500mah 4s 30c[/link]
I am sure there will be more questions to follow and I appreciate any help you can offer.
Thank you.
I purchased a LX1E roller some years ago and I am finally getting around to it but still am unsure of some thing. I hope you fine folks out there can help.
1) The gentleman who had this vehicle before me removed the center diff. I am only planning on bashing with this RC so would the lack of a center diff deter this?
2) I think the gearing is stock (14/51) would it be ok to run the following gear:
[link=http://hobbyking.com/hobbyking/store/__22632__Turnigy_TrackStar_120A_Brushless_Short_Co urse_Truck_ESC.html]Turnigy Track Star 120a[/link]
[link=http://hobbyking.com/hobbyking/store/__17980__Turnigy_1_8th_Scale_4_Pole_Brushless_Moto r_1900KV.html]Turnigy 1900kv 4 pole[/link]
[link=http://hobbyking.com/hobbyking/store/__21003__Turnigy_4500mAh_4S_30C_hardcase_pack_ROAR _APPROVED_.html]Turnigy 4500mah 4s 30c[/link]
I am sure there will be more questions to follow and I appreciate any help you can offer.
Thank you.