The 240 is strong, pipe diameter?
#1
Thread Starter
My Feedback: (76)
Join Date: Aug 2004
Location: Baton Rouge, LA
Posts: 2,715
Likes: 0
Received 0 Likes
on
0 Posts
The 240 is strong, pipe diameter?
What size diameter would be good for a P-240? I sent in my P-240 for the annual check up and it is running strong about 54lbs verified at 260 meters altitude (the 200 does 48lbs on the same conditions) it supposed to do 58 lbs at sea level in the cold.
[youtube]http://www.youtube.com/watch?v=3zP74CB1ZSQ[/youtube]
vs 200:
[youtube]http://www.youtube.com/watch?v=iDuPgezWpdo[/youtube]
Bob said its extremely important to have the right size diameter exhaust tube, however, I don't know what that is a good size? A 200 size exhaust tube? or does it need to be larger?
Looking at various aircraft, I know the Ultra Lightning's tube diameter is too small haven't heard back from Tam on what a good size would be.
The shockwave is supposed to have a large tube that handles up to 300N turbines so does anyone know what diameter the shockwave tube is?
[youtube]http://www.youtube.com/watch?v=3zP74CB1ZSQ[/youtube]
vs 200:
[youtube]http://www.youtube.com/watch?v=iDuPgezWpdo[/youtube]
Bob said its extremely important to have the right size diameter exhaust tube, however, I don't know what that is a good size? A 200 size exhaust tube? or does it need to be larger?
Looking at various aircraft, I know the Ultra Lightning's tube diameter is too small haven't heard back from Tam on what a good size would be.
The shockwave is supposed to have a large tube that handles up to 300N turbines so does anyone know what diameter the shockwave tube is?
#3
My Feedback: (2)
Join Date: Dec 2001
Location:
Posts: 4,586
Likes: 0
Received 0 Likes
on
0 Posts
RE: The 240 is strong, pipe diameter?
I'm not always had the answer specially don't own P-240.
But I had made pipe more than 55 lbs thrust before.
Taking P-200 pipe open up the exit should do the job.
But I had made pipe more than 55 lbs thrust before.
Taking P-200 pipe open up the exit should do the job.
#5
Thread Starter
My Feedback: (76)
Join Date: Aug 2004
Location: Baton Rouge, LA
Posts: 2,715
Likes: 0
Received 0 Likes
on
0 Posts
RE: The 240 is strong, pipe diameter?
ORIGINAL: tamjets
I'm not always had the answer specially don't own P-240.
But I had made pipe more than 55 lbs thrust before.
Taking P-200 pipe open up the exit should do the job.
I'm not always had the answer specially don't own P-240.
But I had made pipe more than 55 lbs thrust before.
Taking P-200 pipe open up the exit should do the job.
Tam I will email you, I need a pipe built.
#6
My Feedback: (2)
Join Date: Dec 2001
Location:
Posts: 4,586
Likes: 0
Received 0 Likes
on
0 Posts
RE: The 240 is strong, pipe diameter?
ORIGINAL: DiscoWings
Tam I will email you, I need a pipe built.
ORIGINAL: tamjets
I'm not always had the answer specially don't own P-240.
But I had made pipe more than 55 lbs thrust before.
Taking P-200 pipe open up the exit should do the job.
I'm not always had the answer specially don't own P-240.
But I had made pipe more than 55 lbs thrust before.
Taking P-200 pipe open up the exit should do the job.
Tam I will email you, I need a pipe built.