Top Flite Staggerwing
#1801
My Feedback: (23)
Join Date: Sep 2004
Location: Fayetteville,
GA
Posts: 1,413
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Staggerwing
I'm still alive and kicking, Wally. Just haven't been able to do much with the hobby lately. Too much other stuff going on. But health-wise, I think I'm okay... I just ran the Atlanta marathon last Sunday and survived How're you?
#1802
My Feedback: (1)
Join Date: Dec 2001
Location: Cedar Rapids , IA,
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Staggerwing
Got a used one with some damage and it is all repaired and ready to go except for the spinner. It seems the prop nut assembly is not the correct one for the OS 160 we are using. Is there any around I could purchase or make work with this spinner, or is there any complete spinner assemblies available that work with the OS 160?
Thanks,
Thanks,
#1803
RE: Top Flite Staggerwing
Hello Paul
Check out True Turn Spinners They make a spinner for a AT-6 that looks like the spinner for the Staggerwing. True Ture will also have the OS 1.60 adapter that your looking for if thats all you need.
Here is a link for the 2-3/4" adapter.
After looking closer at the web page that spinner may be too small from your prop. You may have to go bigger in Dia. to fit your prop
http://tinyurl.com/ce86bln
Here is the replacement prop adapter that your looking for. only $8.95 for the O.S 1.60 engine.
http://www.truturn.com/cgi-bin/store...8a&ppinc=adapt
Regards, Jim
Check out True Turn Spinners They make a spinner for a AT-6 that looks like the spinner for the Staggerwing. True Ture will also have the OS 1.60 adapter that your looking for if thats all you need.
Here is a link for the 2-3/4" adapter.
After looking closer at the web page that spinner may be too small from your prop. You may have to go bigger in Dia. to fit your prop
http://tinyurl.com/ce86bln
Here is the replacement prop adapter that your looking for. only $8.95 for the O.S 1.60 engine.
http://www.truturn.com/cgi-bin/store...8a&ppinc=adapt
Regards, Jim
#1805
RE: Top Flite Staggerwing
Hey Guys
I have my Staggerwing up for sale on RCU if anyone is interested in getting one. I am willing to dicker on the price that i'm asking.
It's a great airplane, just wanting another warbird.
However It's local pickup only, no shipping. But will to drive some distance to met you halfway. I'm in South Carolina.
Regards, Jim
864-477-8208
I have my Staggerwing up for sale on RCU if anyone is interested in getting one. I am willing to dicker on the price that i'm asking.
It's a great airplane, just wanting another warbird.
However It's local pickup only, no shipping. But will to drive some distance to met you halfway. I'm in South Carolina.
Regards, Jim
864-477-8208
#1806
My Feedback: (10)
Join Date: Apr 2002
Location: Tustin,
CA
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Staggerwing
Paul,
The 2 3/4" Tru-Turn AT-6 spinner that Jim mentioned is the one I use on my Stagg. They slotted it for my Xoar 20x8 prop. Fits fine and looks good too. I've been flying mine with it since TopFlite released the plane however long ago! Have no idea how many flights I have on that plane, well in excess of 200! Wore out a set of tires already.
The 2 3/4" Tru-Turn AT-6 spinner that Jim mentioned is the one I use on my Stagg. They slotted it for my Xoar 20x8 prop. Fits fine and looks good too. I've been flying mine with it since TopFlite released the plane however long ago! Have no idea how many flights I have on that plane, well in excess of 200! Wore out a set of tires already.
#1807
RE: Top Flite Staggerwing
Ah!
I guess I'll just keep her for now. I didn't get much interest on RCU Classifieds. That's fine, she's a good ship. I was just looking for another Warbird to ad to my collection. I was wanting a ESM JU84 Stuka. Maybe later.
Jim
I guess I'll just keep her for now. I didn't get much interest on RCU Classifieds. That's fine, she's a good ship. I was just looking for another Warbird to ad to my collection. I was wanting a ESM JU84 Stuka. Maybe later.
Jim
#1809
My Feedback: (4)
Join Date: Nov 2007
Location: Montgomery Village,
MD
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Staggerwing
Hey everyone!!!
Been building the staggerwing, I originally purchased this un-built ARF from a member on these forms. The guy started to build it like do the hinges and stuff like that. but on the top wing he glued the aluminum bar on the wrong side of the wing. So I need to be able to separate the top wing for storage. I installed the top wing to the fuse with out gluing the wings together and it seems like it holds very will with just the nylon bolts. What do you all think will I be safe? besides that..the kit was shorted some parts but lucky I had some extras laying around from other kits. But unfortunately there were a couple that were not included The nylon collars for the rear main struts on the landing gear to hold the gear door to it. Do anyone have any spares or an alternative for this? As well as that, the pre-bent wire/rod for the main gear door flaps is missing as well. Anyone have extras of those or an instruction or plans on how to bend them and what gauge rod I would need to make them if anyone don't have any. Let me know I'm currently at a stand still with this plane.
Been building the staggerwing, I originally purchased this un-built ARF from a member on these forms. The guy started to build it like do the hinges and stuff like that. but on the top wing he glued the aluminum bar on the wrong side of the wing. So I need to be able to separate the top wing for storage. I installed the top wing to the fuse with out gluing the wings together and it seems like it holds very will with just the nylon bolts. What do you all think will I be safe? besides that..the kit was shorted some parts but lucky I had some extras laying around from other kits. But unfortunately there were a couple that were not included The nylon collars for the rear main struts on the landing gear to hold the gear door to it. Do anyone have any spares or an alternative for this? As well as that, the pre-bent wire/rod for the main gear door flaps is missing as well. Anyone have extras of those or an instruction or plans on how to bend them and what gauge rod I would need to make them if anyone don't have any. Let me know I'm currently at a stand still with this plane.
#1810
Senior Member
Join Date: Aug 2008
Location: ADDLESTONESURREY, UNITED KINGDOM
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Staggerwing
Hi.
Sorry to hear about your problems with your second hand purchase :
I would try and work out a way to just put a bolt on to lock the wing spar in place....just in case : my thoughts would be to try and duplicate what T/F have done in the other wing half ie: drill a hole in the other wing,exactly over where the spare slides in ( so that a bolt will push down onto the top of the spare to lock it in ). This bolt can be held in the wing using a "blind-nut" / "captive-nut" in reverse from the surface of the wing,so that the spikes will be sticking into the wing surface,you could use a thin bit of ply to ensure good strength and epoxy the "nut" to the ply,then the ply to the wing surface after removing some covering material.
The bolt then threads throught the captive nut and onto the top of the spar to lock it in.
Hope that the above makes sense.
For the U/C.........just use some metal wheel collets ( with the correct threaded bolts) of the correct dia of the U/C wire..........just the same job.
These are what you need for the door "flaps" on the U/C,see pic: Material is a "piano-wire" approx dia 1.01mm / 0.040"...have you got the plastic plates as in the photo..?
Kind regards..............Nick (UK).
Sorry to hear about your problems with your second hand purchase :
I would try and work out a way to just put a bolt on to lock the wing spar in place....just in case : my thoughts would be to try and duplicate what T/F have done in the other wing half ie: drill a hole in the other wing,exactly over where the spare slides in ( so that a bolt will push down onto the top of the spare to lock it in ). This bolt can be held in the wing using a "blind-nut" / "captive-nut" in reverse from the surface of the wing,so that the spikes will be sticking into the wing surface,you could use a thin bit of ply to ensure good strength and epoxy the "nut" to the ply,then the ply to the wing surface after removing some covering material.
The bolt then threads throught the captive nut and onto the top of the spar to lock it in.
Hope that the above makes sense.
For the U/C.........just use some metal wheel collets ( with the correct threaded bolts) of the correct dia of the U/C wire..........just the same job.
These are what you need for the door "flaps" on the U/C,see pic: Material is a "piano-wire" approx dia 1.01mm / 0.040"...have you got the plastic plates as in the photo..?
Kind regards..............Nick (UK).
#1811
My Feedback: (4)
Join Date: Nov 2007
Location: Montgomery Village,
MD
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Staggerwing
njmheli,
I understand what you mean about the wing spare. Ill most likely end up doing that. As for the u/c I do have metal collars with the screw fitting that fits but the problem i have is getting the collar over the bend in the strut. The plastic plates i believe i do have I remember seeing one i just hope I have the other. The piano wire is what i need..I can make it myself but would need a good visual of how it is bent/formed.
Thanks
I understand what you mean about the wing spare. Ill most likely end up doing that. As for the u/c I do have metal collars with the screw fitting that fits but the problem i have is getting the collar over the bend in the strut. The plastic plates i believe i do have I remember seeing one i just hope I have the other. The piano wire is what i need..I can make it myself but would need a good visual of how it is bent/formed.
Thanks
#1812
Senior Member
Join Date: Aug 2008
Location: ADDLESTONESURREY, UNITED KINGDOM
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Staggerwing
Hi.
OK..........have a look at these,let me know what else you need from the bits..... you may be able to enlage the photo's to size as shown..?
Kind regards...........Nick (UK).
OK..........have a look at these,let me know what else you need from the bits..... you may be able to enlage the photo's to size as shown..?
Kind regards...........Nick (UK).
#1813
Senior Member
Join Date: Aug 2008
Location: ADDLESTONESURREY, UNITED KINGDOM
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Staggerwing
Hi.
Some "angles" for you,hope this helps............
Thought of making your own plastic collets out of a piece of plastic rod..?
Kind regards.............Nick (UK)
Some "angles" for you,hope this helps............
Thought of making your own plastic collets out of a piece of plastic rod..?
Kind regards.............Nick (UK)
#1815
My Feedback: (4)
Join Date: Nov 2007
Location: Montgomery Village,
MD
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Staggerwing
I was thinking about the plastic collars too for a plastic rod...ill more then likely be heading to the hobby shop on Friday to check things out there
#1816
My Feedback: (4)
Join Date: Nov 2007
Location: Montgomery Village,
MD
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Staggerwing
Got those wires bent up like they should and installed...I don't know if I have them installed right or what? when the gear goes up the wire binds with a part of the gear causing the back part of the flap on the door to bend up. Is this normal? Anyone have any pics or video of the gear in action? would be much appreciated.
#1817
Senior Member
Join Date: Aug 2008
Location: ADDLESTONESURREY, UNITED KINGDOM
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Staggerwing
HI.
Have a look at this,it is a short video of my U/C ( using an early version of D & L electric retracts )...........hope this helps you...........It may just be a question of getting the linkage adjusted correctly..?
http://www.youtube.com/watch?v=MVm7P98gLqE
Kind regards.............Nick (UK).
Have a look at this,it is a short video of my U/C ( using an early version of D & L electric retracts )...........hope this helps you...........It may just be a question of getting the linkage adjusted correctly..?
http://www.youtube.com/watch?v=MVm7P98gLqE
Kind regards.............Nick (UK).
#1818
My Feedback: (4)
Join Date: Nov 2007
Location: Montgomery Village,
MD
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Staggerwing
I saw that video...not really clear on seeing how it was installed...I guess I just got bend it and adjust it so that it is not sloppy when the gear is up
#1819
Senior Member
Join Date: Aug 2008
Location: ADDLESTONESURREY, UNITED KINGDOM
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Staggerwing
Hi.
If you still having problems,I will get the S/W out and take some photo's for you...?
Let me know...
Kind regards Nick(UK).
If you still having problems,I will get the S/W out and take some photo's for you...?
Let me know...
Kind regards Nick(UK).
#1821
My Feedback: (4)
Join Date: Nov 2007
Location: Montgomery Village,
MD
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Staggerwing
This is getting to be a frustrating build...just about almost every time i look for a part in the parts bag it is missing. I don't have all the mounting plywood for the air tank, gear servo, air valve and screws and bolts....luck I got extra screws and bolts left over from other builds. I'm just going to have to make my own ply mounts for the air system....Kinds sucks that I have a deadline for this project....3 more weeks left to build for a local show.
#1824
Senior Member
Join Date: Aug 2008
Location: ADDLESTONESURREY, UNITED KINGDOM
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Staggerwing
Hi.
Very nice looking S/W,looks great with the 200 sitting up front !!!
I too had the same problem,but you may be able to "dial" a little bit of that out.........as it is just in the geometry setting,I kow that you bent up the "rod" from the details that I posted,so if the door is working,you cannot be too far of the correct setting.
My fix to get the door flush was :
1/......try to shorten the length of the rod where it is clamped to the "half-door".......takes a little bit of time,but you may get it a bit better.
2/.....I was lucky enough to purchase another set of gear doors and fittings from "Omnimodels in the US " ( hence a spare set of rods that I gave you the dimensions for )...I then took two of the hinges off of the spare set and bolted exactly where the door appears to "bend up" when retracted on each door. ( the rod then takes up the retract compression for the door being held flush by the hinge )..........PROBLEM ALL SOLVED and nice flush doors !!!
It's not too much work and I'm sure you can get another hinge..............a piano type small hinge..? ( as used in what we call here in the UK "Doll's House" that children play with,from a craft store maybe ).I think that you will find that T/F have used metal hinges on the doors..
If you look at mt U/C video again,you should see the extra hinge that I fitted....
Hope this helps.........But I know you are on a very tight schedule for your Model Show.....hope it all goes well !!!
Kind regards..............Nick (UK).
Very nice looking S/W,looks great with the 200 sitting up front !!!
I too had the same problem,but you may be able to "dial" a little bit of that out.........as it is just in the geometry setting,I kow that you bent up the "rod" from the details that I posted,so if the door is working,you cannot be too far of the correct setting.
My fix to get the door flush was :
1/......try to shorten the length of the rod where it is clamped to the "half-door".......takes a little bit of time,but you may get it a bit better.
2/.....I was lucky enough to purchase another set of gear doors and fittings from "Omnimodels in the US " ( hence a spare set of rods that I gave you the dimensions for )...I then took two of the hinges off of the spare set and bolted exactly where the door appears to "bend up" when retracted on each door. ( the rod then takes up the retract compression for the door being held flush by the hinge )..........PROBLEM ALL SOLVED and nice flush doors !!!
It's not too much work and I'm sure you can get another hinge..............a piano type small hinge..? ( as used in what we call here in the UK "Doll's House" that children play with,from a craft store maybe ).I think that you will find that T/F have used metal hinges on the doors..
If you look at mt U/C video again,you should see the extra hinge that I fitted....
Hope this helps.........But I know you are on a very tight schedule for your Model Show.....hope it all goes well !!!
Kind regards..............Nick (UK).
#1825
My Feedback: (4)
Join Date: Nov 2007
Location: Montgomery Village,
MD
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
RE: Top Flite Staggerwing
Nick,
I followed your instructions. I don't know if that gauge of wire has something to do with it I used .47 i could not fine .40 gauge.
I also followed the first 2 posts on PG. 44. But it seems to be an issue for some. The wire bines on the fork of the strut when the flap of the gear door closes causing the back of the gear door flap to pop up like in my pic. Are you suppose to run the rod over or under the fork of the strut?
Jon
I followed your instructions. I don't know if that gauge of wire has something to do with it I used .47 i could not fine .40 gauge.
I also followed the first 2 posts on PG. 44. But it seems to be an issue for some. The wire bines on the fork of the strut when the flap of the gear door closes causing the back of the gear door flap to pop up like in my pic. Are you suppose to run the rod over or under the fork of the strut?
Jon