Prop size for Parkzone 950Kv .15 outrunner motor, 30amp ESC
05-10-2013, 07:07 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2013
Location: Annapolis, MD
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Prop size for Parkzone 950Kv .15 outrunner motor, 30amp ESC
It came with a 9x7.5 but i would like to make it larger without changing any of the internal portions. Parkzone F4-U corsair is the plane in question. Oh and good morning everyone!
05-13-2013, 12:45 PM
#2
Senior Member
Join Date: Dec 2002
Location: Chattanooga,
TN
Posts: 2,198
Likes: 0
Received 0 Likes
on
0 Posts
RE: Prop size for Parkzone 950Kv .15 outrunner motor, 30amp ESC
If you want larger diameter (say, 10") you will have to go down in pitch (maybe 10x5 or 10x6) to keep the load and amp draw the same. Check it with your Wattmeter before flying!
