phillio35

heres my finished ac boats r 42 in new yellow and black looks wicked in the sun .purchased hull from gizmo motors with esp head stroker crank victory pipe and speed master hardware havnt tested it yet does anyone have one and what prop suits it ive heard 7016/2 or 7015/2 go well ac did a luvly faultles job on hull and thanks to bruce at gizmo

MrMikeG

I run a 6717/3 on mine, nice build!

phillio35

ok will try thanks

Dan S

there are a few other props that would work with it, the prop mentioned is a good one and the 7016/2 prop is a great prop to have in your box, it pretty much works well on everything.

Dan.

coyv10

6713/3 410pitch best one I have found for mine.

gtopillado

Great choice in Cat! I run a 6717/3, 7016/2 is another great prop as mentioned.

Tahoe1970

Very Nice looking Boat ! Just one observation....the water outlets on the back. Not being able to see if you have water flow could cost you your engine.

IMHO : Wally

coyv10

6717/3 on a 430 pitch

Jackal1983

You've got a lovely looking ac there buddy. I'd say you need to move your cooling pissers from the back to the side just so you can see them that's all... Just easyer to see if you get blockage might get not be able to see them properly at the back... To much water being pushed about.

phillio35

thanks mate its gel coat ,not paint they tend to scratch to easy .never had a problem with the water outlets before but thanks for your coments

Ron Olson

My Feedback: (1)

Two props I'd highly recommend, a 2716/3 or 2614/3. The latter one is a really fast prop for your boat.
Is the ESP Earth Surfer Products? I know the guy and he wanted to do up an engine for me. I've been to his house and have seen his setup, not bad for a one-car garage operation!

phillio35

yes it is ron thanks for advise