need a wing tube
#1
Senior Member
Thread Starter
Join Date: Dec 2005
Location: Litchfield, MI
Posts: 5,130
Likes: 0
Received 0 Likes
on
0 Posts
need a wing tube
I have a Dualsky extra 260 54" WS that I need a wing tube. 17mm by at least 22.6" If anyone has one they want to sell pm me.
#3
My Feedback: (-1)
RE: need a wing tube
Well Gene, after doing my big search Scott was able to locate me a wing tube. My big problem was the size. I located smaller tubes of carbon fiber from Hobby King, just nothing as big as I needed but there prices were better then anyplace I had found. If speed says his ebay guy is trust worthy then by all means I would give him a try. I don't know his dealer but I trust Shawns word and judgement.
#5
My Feedback: (8)
RE: need a wing tube
I'm not sure of the most efficient way, but if you search for Carbon Wing Tube and click on an ad, you can see the seller, then click on their name and see their offerings. Fortunately Happychoice2009 is the first few ads that come up. Even cooler (for you) is that he links a website:
http://cfpart.com/
http://stores.ebay.com/happychoice2009
http://cfpart.com/
http://stores.ebay.com/happychoice2009
#6
Senior Member
RE: need a wing tube
If you are really desperate, you might be able to get something like this to work, it is a little smaller but, you might be able to wrap it with something. http://www.advantagehobby.com/80643/GPMGPMA3199/
#7
RE: need a wing tube
Are you still looking for a wing tube?
Here you go:
[link=http://www.graphtechrcshop.com/product.sc?productId=545&categoryId=24]Click me![/link]
If need be wrap a bit of tape around the tube to make up for the 1mm difference.
Here you go:
[link=http://www.graphtechrcshop.com/product.sc?productId=545&categoryId=24]Click me![/link]
If need be wrap a bit of tape around the tube to make up for the 1mm difference.
#8
RE: need a wing tube
That 17mm size appears rare.
http://www.chiefaircraft.com/radio-c...tab-tubes.html
http://www.troybuiltmodels.com/categ...par-Tubes.html
Also - it doesn't necessarily have to be a tube. You can make an "X" cross-section out of two lengths of aluminum angle iron (overlap the angle just enough to add a fastener every six inches or so) or even slotted aircraft plywood that is 17mm across the flats and epoxied along the joints.
http://www.chiefaircraft.com/radio-c...tab-tubes.html
http://www.troybuiltmodels.com/categ...par-Tubes.html
Also - it doesn't necessarily have to be a tube. You can make an "X" cross-section out of two lengths of aluminum angle iron (overlap the angle just enough to add a fastener every six inches or so) or even slotted aircraft plywood that is 17mm across the flats and epoxied along the joints.
#9
My Feedback: (5)
RE: need a wing tube
Contact this seller and ask if they will cut you a longer piece if 20" is too short.
http://www.ebay.com/itm/2pcs-17MM-OD...item4ac4b71844
http://www.ebay.com/itm/2pcs-17MM-OD...item4ac4b71844
#11
My Feedback: (5)
RE: need a wing tube
You probably saw this too :
http://www.goodluckbuy.com/17mm15mm-...00mm-long.html
I went through this a month ago. Finally found someone with a busted tube that was still long enough for my needs. Good luck.
http://www.goodluckbuy.com/17mm15mm-...00mm-long.html
I went through this a month ago. Finally found someone with a busted tube that was still long enough for my needs. Good luck.
#12
My Feedback: (6)
Join Date: Oct 2002
Location: Mountain Home,
AR
Posts: 2,684
Likes: 0
Received 0 Likes
on
0 Posts
RE: need a wing tube
Hey Irish, I guess I don't understand the problem fully. I googled "17mm carbon fiber tube" and got 100,000 returns. Many places are selling 17mm carbon fiber tubing up to 76 inches long. What am I not grasping here?
#13
Senior Member
Thread Starter
Join Date: Dec 2005
Location: Litchfield, MI
Posts: 5,130
Likes: 0
Received 0 Likes
on
0 Posts
RE: need a wing tube
ORIGINAL: JollyPopper
Hey Irish, I guess I don't understand the problem fully. I googled ''17mm carbon fiber tube'' and got 100,000 returns. Many places are selling 17mm carbon fiber tubing up to 76 inches long. What am I not grasping here?
Hey Irish, I guess I don't understand the problem fully. I googled ''17mm carbon fiber tube'' and got 100,000 returns. Many places are selling 17mm carbon fiber tubing up to 76 inches long. What am I not grasping here?
#14
Senior Member
Thread Starter
Join Date: Dec 2005
Location: Litchfield, MI
Posts: 5,130
Likes: 0
Received 0 Likes
on
0 Posts
RE: need a wing tube
I must be doing something wrong. I googled carbon fiber wing tube and nothing came up in 17mm I seen 15,18,20 and 22. I then tried to narrow the search by asking for carbon fiber wing tube 17mm 76" long. Nothing.