ggunners

Hello sim flyers,

Just completed the ParkZone P-51D RTF/BNF airplane. It is
quite awesome with LiPoly battery, brushless motor and
a much lighter weight than the older version. Adding in the
Bind-And-Fly option is just what the PZ RC flyer needs.

[link=http://gunnerson.homestead.com/files/ipacs/pz-p51-bl_afpd.zip]Parkzone P-51D brushless for AFPD
[/link]

http://www.parkzone.com/Products/Def...ProdID=PKZ1880

Wing Span: 39.0 in / 990mm
Overall Length: 33.5 in / 850mm
Flying Weight: 25.0 oz / 710g
Motor Size: 480 power (960Kv) brushless outrunner motor
Prop: 9x6
ESC: 18A brushless
Battery: 3-cell 11.1V 1200mAh LiPoly
Channels: A/E/T dual aileron servos, optional rudder channel
Requires: full-range DSM2 aircraft transmitter (sold separately)
Gear: none, belly lander

I have this model and it not a trainer. The model requires a bit of
speed with the low wing loading. It will do all the aerobatics
you can throw at it and handles the wind really well. I hope you
like the AFPD version.

ggunners [link=http://gunnerson.homestead.com/files/ipacs_models.htm](my afpd web-site)[/link]

ggunners

Just added the [link=http://gunnerson.homestead.com/files/ipacs/pz-t28-trojan_afpd.zip]ParkZone T-28 Trojan for AFPD too:

[/link]

rajul

My Feedback: (58)

Nice work! I've added a link to your website in the sticky for AFPD models.

ggunners

Thank you rajul. I hope to add many of the ParkZone sim models to AFPD. ggunners

rajul

My Feedback: (58)

OK looking forward to them. It would be helpful to include some installation instructions for those not so familiar.

ggunners

Added a INSTALL.TXT and a EULA.TXT files to the .zips. Should be OK now. ggunners

rajul

My Feedback: (58)

Great and thanks!