STEVE HOSNER

Nick,

I have had zero problems with the hinges included with the kit. All and all I think the Vanquish is a great plane.

Steve Hosner

nosram

Steve,
Thank you, that is great news. Did you also gap seal with Blenderm tape?
Thanks, Nick

STEVE HOSNER

Nick,

On my first Vanquish (Yellow and Red) I used Blenderm and on my second Vanquish(Blue and Pink) I used white Econo Cote to seal the gaps.
Enjoy your build you will love this plane.

Steve

vatechguy3

My Feedback: (11)

what is the stock tire size??

when you gues measure balance, i am assuming the 7-1/8" is at the root?

thanks
tony

vatechguy3

My Feedback: (11)

Talking to some guys at my field, do I need a spark arrestor to avoid sparks when plugging in the batteries??

Tony

rightflyer

I am using the MPI 12g Hi-Current No-Spark Arming Switch with Deans connectors. Works very well me. I bought from Radical RC

vatechguy3

My Feedback: (11)

Can you post a pic of how you wired it in please?

Tony

rightflyer

It is actually pre-wired so you just pick a location to mount it that works well for your batteries and esc.

vatechguy3

My Feedback: (11)

Yeah I saw that, but I changed the ESC from a single male connector to add the series connectors.

Will post a pic of what I did soon.

Tony

rightflyer

Ok. I just used a series adapter on the ESC but your way may be better long term.

Jimmyzrx

I am just starting to build my Vanquish and going to install Hacker A60-7S not sure how to install this motor, I have seen the couple pics of drilling a hole thru the motor box.is there any more info on this install? Thanks Jimmy

nosram

As a follow up to my post last month about the included hinges, I have been meaning to mention that when I went to instal the hinges a couple of them were tight. On inspection I found that the hinge rivet had been crimped off center. I then discovered that the rivet was aluminum. I also found that there was play between the pivet and plastic molding. I have replaced them with Robart, these have no slop and the rivet is made of steel. I assume that the steel will offer a better bearing surface.
Nick Marson

Jetdesign

My Feedback: (8)

You do not need a spark arrestor. Most people don't use them, it is a preference option.

kochj

can't you make a spark arrestor, buy placing a capacitor inline with the (+) line??
I didn't think it was anymore complicated than that?

The spark is actually an ARK? or do I know didly?

Jetdesign

My Feedback: (8)

You can make one. It is a resistor, not a capacitor. The idea is that you are making the connection from the battery to the ESC 'slowly' - you want the capacitors on the ESC to fill up slowly rather than instantaneously to avoid the ark (and yes, it is an ark). The resistor prevents the current from flowing to the ESC too quickly.

The commercially available spark arrestors are just an extra small set of +ive and -ive leads with a resistor and a momentary action switch. Here is a link that shows how to make one:
http://rc.runryder.com/helicopter/t547501p1/

Castle Creations has a comment about the 'spark being your friend' - please note that they tell you this so you are not afraid of the spark. a loud snap is somewhat of an indicator that the capacitors in the ESC are working properly, but it is not critical nor is it enough to tell whether or not your ESC is working properly.

hovermaster

My Feedback: (2)

Well, just came back from the D8 BARKS Pattern contest. The Vanquish flew excellent and with the Lords help I was able to win all 6 rounds in Masters.

Chris

vatechguy3

My Feedback: (11)

Nice job Chris!!

Care to share your balance and control throws??

Tony

rightflyer

Congrats, Chris! great looking plane.

danamania

Congrats Chris!

STEVE HOSNER

I have noticed quite a bit of interest in installing a Hacker A60-7s into the Vanquish.
I have put together a step by step guide showing how I have done this to my two Vanquish.
Here is hoping that this will be of some interest and help to those wanting to use the Hacker
motor.

I want to be clear that there are motors out there that will bolt right into the Vanquish without
the need for any modification. I have been impressed with the way these motors power the Vanquish.
I also am impressed with how the A60-7S powers the Vanquish. I am posting this just to help open
up the option of using another more affordable motor.

This being my first time at starting a new post I hope I did it correctly.

Thanks all,

Steve Hosner

nosram

I have a question or two:
I have just got to the rudder horn installation. Are there any tips for this, please? Is 30 minute epoxy the best way to go, over say CA?
When opening up the slots is it better to remove material away from the hinge, towards the rear of the plane?
The instructions show the support plates with the opening towards the hinge. Would it be stronger to have the opening towards the ear of the plane?

Any advise will be very valued, thank you in advance,
Nick Marson

Delicious J

My New Vanquish is for sale unfortunately. Was just built and only has 8 flights. I crashed my pride and joy and need the funds to replace it.

The ad is here; http://www.rcuniverse.com/market/item.cfm?itemId=924349

and a ton more pics here; http://www.rcgroups.com/forums/showthread.php?t=1919381


Every single component was bought brand new and I have extras, and new packs included

Will meet in Texas for Pick-up

nosram

Matt,
I am interested in your cells, the wing bag, APC props. I have evrything else I think.
Are the cell Zippy compacts?

Let me know,
Nick Marson

aerobatix1

My Feedback: (1)

Hi Everyone,

I am looking to buy a Vanquish prefer ready to fly but open to any options. I am on the west coast near Sacramento. I sent a message to the 2 models listed in the classifieds but though it was worth posting here to see if someone may consider selling their setup.

Hope to hear from someone!

Thanks!

Rob Sarlan

Delicious J

Sorry Nick, I wish I would have seen this sooner.

I have sold the batteries, but I still have the Hi-Max motor($210, shipped), jr servos, TP rx packs, switches, as well as a great Airframe bundle.

8 flights on airplane and all electronics. Receipts included with motor and servos for warranty.


Help me spread the word guys.....

Airframe, all servo extensions, 2 props, spinner, wing bags, extra canopy, extra rudder, extra horns, ..... $400 in Houston

Here is the ad

http://www.rcgroups.com/forums/showt...0#post25409374